Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

CPU Running too hot!

casper5632
Level 7

‎10-15-2014 08:32 PM - last edited on ‎03-05-2024 10:07 PM by Community Admin

I am using AI Suite 3 to control my fan settings on my Maximux Vi Hero motherboard. The problem is that it is completely innacurate. My CPU (Intel 4790k) runs all the way up to 60c because the fans never stay on very high. When a load is put on the CPU the fans kick up for a few seconds and then they go back to idle temps, while the CPU is burning away. Every other temp monitoring program is accurate, and I made sure to not have them running at the same time.
Labels:
0 Kudos
710 Views
6 REPLIES 6

Dr__Zchivago
Level 12

‎10-15-2014 08:37 PM

As I understand it, 60 degrees C is nominal load temperature for that CPU; and, it can run into the 110 degrees C range.

I would like some validation, however, as I run AMD.

Z
0 Kudos

casper5632
Level 7
In response to Dr__Zchivago

‎10-15-2014 08:41 PM

It can but I am planning to overclock it. It runs at 50c running Prime95 with the fans at 100%. I got it running at 60c playing wasteland 2.
0 Kudos

Myk_SilentShado
Level 15

‎10-16-2014 05:17 AM

Choose one single monitoring tool and uninstall the rest, even having more than one installed(even if you have multiple but use only one at any given time) is known to cause mis-reads.
ROG Overclocking Education Center ||| ROG RealBench Tweaks & Tips
0 Kudos

casper5632
Level 7
In response to Myk_SilentShado

‎10-16-2014 10:51 AM

Myk SilentShadow wrote:
Choose one single monitoring tool and uninstall the rest, even having more than one installed(even if you have multiple but use only one at any given time) is known to cause mis-reads.


Uninstalled every single program with temp monitoring capabilities and there was no change in the accuracy of the temps in AI Suite 3.
0 Kudos

Nate152
Moderator

‎10-16-2014 03:22 PM

AI Suite does not give the core temps, it gives more or less the socket temp.
ROG Strix 1070 OC Guide - ROG Spatha X Rapid Fire - ROG Falchion Touch Panel - z270 BCLK Overclocking - Xsplit Gamecaster Guide - ROG RX 460 OC Guide
0 Kudos

casper5632
Level 7
In response to Nate152

‎10-16-2014 04:26 PM

Nate152 wrote:
AI Suite does not give the core temps, it gives more or less the socket temp.


The difference between the core and socket temp is supposed to be around 10c. There is no measurable difference between the core temps and the temp shown in ai suite. During idle it jumps around 30-40c and and it does the same during load. I cant use this temp to set my fan curve because it doesnt actually go up when the CPU gets hot. It will jump up to like 45ish for a few seconds, but it quickly goes back down to the 30s. HWMonitor measures socket temp correctly when I had it running.

Is this software just worthless for setting fan speeds?
0 Kudos