AURA v1.05.27 [Report all issues in this thread]

[AkaNe0]

A new version of AURA software is now available.

DOWNLOAD AURA V1.05.27

Read the FAQ

Changelog for v1.05.27:

• Corsair memory kit "CMR" 2x8GB are now detected
  
• Fix stability issues
  
• Fix occasional high CPU loading issues
  
• Adjust effects settings
  
• Fix issue with Windows 10 Fall Creators Update
  
• Add support for Fusion 500 Headset
  

Side note
->For X99 chipset motherboards: to enable DRAM LEDs control, please go to BIOS / Ai Tweaker (or Extreme Tweaker) /DRAM Timing Control / DRAM SPD Write : Enabled
-> For Corsair Memory, due to hardware compatibility limitation, the Breathe and Color Cycle effect do not light on.
-> For the addressable LED, the limit is set at 60 LEDs. We are working on increasing this limit for future version.

Having issues?
Before reporting, make sure to follow the below steps:
-> Have the latest BIOS for your motherboard.
-> Have the latest drivers and firmware installed for all your AURA Sync products.
-> Uninstall previous version of AURA through the Control Panel and reboot your system.

Problem with installing Aura, follow those steps:
1. Run Aura Cleaner tool available here
2. Uninstall Aura through the control panel
3. Shut down your computer completely (from the PSU / power plug).
4. Download the latest version of AURA available.
5. Unzip the zip file, right click on the “Setup” and under Properties\Compatibility, select “Run as administrator”. Apply and close Properties window.
6. Run "Setup" and reboot your system.

To report an issue
Please provide a detail description of your problem and your system specs, including:
Motherboard:
BIOS version:
Processor:
OS:
Memory kit:
Graphics card:
Mouse:
Keyboard:
Cooling solution:
Aura version:

[mrosengarth]

For me none of the solutions works. i´ve tried the unblock-trick, the Cleaner. I always get the "Can´t open AsIO.sys !! ( 2 )" error.

This is a total new build i´m running with a Maximus X Apex and a i7 8700K at stock...

[JamesTinio]

I still can't get AURA to work. I run it, and it only crashes and gives me that drdump website

[IainM]

No problems at all but when I click on the icon on the screen or on the task bar and click Yes to run the program I get two small messages saying Install Driver failed and Start Driver failed. Then the Aura screen appears and works just fine in all modes. Admittedly I have no RGB except my mobo Strix Z370F and my GPU GTX1080TiOC so I wouldn't know about RGB strips or fans etc.

[namoi]

I think it is time for the Aura team to implement a debug mod with logging in Aura.

Too much variations with hardware and software make nailing down bugs an impossible task.

Come on, even on ****y android app i can send a log report. Here we have to describe the problem (with video...) and post our build specs.

The same should be done with Armoury along A DEDICATED THREAD in asus software sub forum to allow reporting bugs.

Sent from my XT1562 using Tapatalk

[Gofran]

for mei am using this version all work now Lighting_Control_1.05.16

[Krogsager]

So I followed these instructions

AkaNe@Asus wrote:

Problem with installing Aura, follow those steps:
1. Run Aura Cleaner tool available here
2. Uninstall Aura through the control panel
3. Shut down your computer completely (from the PSU / power plug).
4. Download the latest version of AURA available.
5. Unzip the zip file, right click on the “Setup” and under Properties\Compatibility, select “Run as administrator”. Apply and close Properties window.
6. Run "Setup" and reboot your system.

and cannot get the program to start. I have tried uninstalling and installing a couple of times now with no luck.

All I get is the bug report form with the following message:

WARNING: Following frames may be wrong.
aura+0xcbac
aura+0x6c093
aura+0x66041
aura+0x25fa4
aura+0x2a16f
aura+0x24d22
aura+0x89bac
aura+0x9eab4

Motherboard: ASUS ROG STRIX Z270
BIOS version: 0814
Processor: Intel i7-7700k
OS: Windows 10 64bit
Memory kit: Corsair Vengeance RGB 16Gb @ 3000Mhz
Graphics card: ASUS Strix 1070
Mouse: Corsair M65 PRO RGB
Keyboard: Corsair K95 Platinum
Cooling solution: Corsair H110i v2
Aura version: 1.05.27

EDIT:
Okay, got it to work, but the DRAM lights are off when using Breathing and Colour cycle.
The transitions are choppy when using Rainbow.
There seems to be some sync issues with Comet, Flash and Dash and Glowing yoyo.

[eviqine]

now randomly fixed....but in one hour aura will lose motherboard again

[Hopper64]

I had to go back to version ...25. I had this error everytime I opened LiveDash with this version:



Went back to 1.05.25 and the error went away and the problems I encountered with Dash (not responding to input changes) resolved too.

[warbosschoppa]

Says only the owner can download infected files when I attempt to download the software.

[mrosengarth]

Even the new version 1.05.28 available on the Maximus X Apex support page has the same error: Can´t load Asio.sys (2)...

I can´t use any of the Asus Software with my newly installed build. Please fix this ASAP!