Hey guys I'm having the same problem as namAehT
GPU: GTX 1080Ti x2 SLI
RAM: 32GB Corsair VENGEANCE RGB DDR4 3000MHz
MoBo: ROG STRIX X299-E GAMING
I got a 144 LED strip but can only enter upto 60 on Asus Aura
running a TUF Z370-Plus Gaming with a kit of Corsair Vengeance RGB Memory. The kit has the number: CMR16GX4M2A2666C16,2x8GB
I've seen another thread where a .26 beta version is available. Using the beta version I can change the settings of the memory, too. It shows up at the top and can be managed but still suffers from the problems described in the other thread. With the current .25 version management is not possible.
Just wanted to let you know so that you can add the support for the above kit into the next release.
I have this problem !!!!! HELP !
After installing the Windows fall creator update and installing the last version of Aura, I have an error message after launching the app :
Unable to obtain the AURA-enabled device information.
I just have a ROG Strix H270F motherboard and i wanted to test it before purchase other compatible devices.
The bios is up to dateand Aura enabled in it.
Any idea of what can be my problem?
RSR;683320']As per my update on the other thread.
I've just taken my whole system apart, removed the battery (This is a complete mission to get to the batter as you need to tear down the board R6E) for 5 minutes. Refreshed BIOS 802 from the flash back feature, loaded defaults and still nothing.
I did spot something interesting on first boot though, it seems to do a additional BIOS update and then power off and then restart on the OLED screen. However, it displays the following:
Updating EC1 Code
This is the same for 802 / 10021 BIOS images.
As I am not sure of this board needs to be RMA'ed or not?
Is there any updates from the ASUS rep?
I have added this point to be checked by our software team.