cancel
Showing results for 
Search instead for 
Did you mean: 

AURA V1.05.16 [Report all isues in this thread]

Bahz
Level 12
You can download the latest version 1.05.16 at the link below:
http://dlcdnet.asus.com/pub/ASUS/mb/Utility/Lighting_Control_1.05.16_20170731.zip?_ga=2.121618888.11...

Patch Notes:
Solves conflict with Armory software
We recommend to manually uninstall your previous Aura version through Control Panel/Programs and Features before installing Aura 1.05.16
When KeyBot II software is activated, Aura software cannot control ROG Claymore keyboard lighting
Always update to latest available motherboard BIOS
Update CPU-Z 1.79.1 or later version to avoid conflict with Aura
For X99 chipset motherboards: to enable DRAM LEDs control, please go to BIOS / Ai Tweaker (or Extreme Tweaker) /DRAM Timing Control / DRAM SPD Write : Enabled

Please refer to https://www.asus.com/campaign/aura/Sync.html for full Aura Sync compatibility motherboard and device list


Please post all bugs and issues for this version in this thread.
278 Views
125 REPLIES 125

mojo187
Level 7
Hi, I have B350-F, on the mobo theres 2 RGB headers and conveniently named Header 1 & Header 2. Im plug both header with 2 different RGB strip, My question is, in Aura why does it not detect 'RGB pin Header 1 and RGB pin Header 2'?
it only detect 1 'RGB Header', meaning in AURA i can only adjust from 1 Header. Even though both RGB Strip is from 2 different header, both Still works it just that i am unable to individually change both of the strip colors.

Anybody else notice this issue?
Thanks

Hi Bahz,

When we can the new build ? I realy want to see it for pure white . Do you have any information ?

1.05.22 was posted today and it works very nicely here (motherboard and strips).

bachastain wrote:
1.05.22 was posted today and it works very nicely here (motherboard and strips).


Thanks. I just ınstall it, but still i cant do my led strips to pure white. Can you do pure white ? If yes , which rgb strips are you using ?

Thanks.

Ziver wrote:
Thanks. I just ınstall it, but still i cant do my led strips to pure white. Can you do pure white ? If yes , which rgb strips are you using ?

Thanks.


Yes, it would likely just be a compatibility issue with your RGB strip

Bahz
Level 12
Locking this thread, please post all new issues to the thread below:
https://rog.asus.com/forum/showthread.php?95851-AURA-V1-05-22-Report-all-isues-in-this-thread