cancel
Showing results for 
Search instead for 
Did you mean: 

AURA SYNC 1.07.35 [Report any issues here]

MasterC
Community Admin
Community Admin
Aura Sync version 1.07.35 is now available.
Download here:
https://www.asus.com/campaign/aura/au/download.html

Release notes:
- Improved support for RTX graphics cards
- Implemented the option to disable in-game lighting effects for Call of Duty Black Ops 4
- ROG Delta headset auto-sync disabled in Aura - no longer necessary to unsync before loading Armoury II.
- Conflict with LiveDash resolved
- Fixed security vulnerabilities

If you experienced installation issues previously, please follow the procedure below:
- Make sure you have updated the firmware for your keyboard & mouse using Armoury.
- Right-click on Setup (not AsusSetup), then Run as administrator to uninstall the old version and remove all cached data.
- Reboot PC.
- Right-click on Setup, Run as administrator to install 1.07.35.
- Reboot PC.
- Right-click on the Aura shortcut icon, Run as administrator to open the Aura application.
- If devices are not showing in the Aura UI, hit the refresh icon.

If you need to report any issues after installing 1.07.35, please remember to mention the following to make debugging faster:
1. The BIOS/firmware version for your hardware.
2. The AURA SYNC products you own and any other 3rd-party lighting software.
3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
4. If you have tried reinstalling Aura or Windows already.
5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
6. Windows Edition, Version, and OS build.
7. If the same issue was present in the previous version(s).
8. State clearly the issue(s) you are experiencing.
Please Include a screenshot of the Aura UI, and any other pictures if applicable.
_____________________________________________________________
FPS, Racing, and VR Gamer / Tech Enthusiast / ROG Admin
418,183 Views
470 REPLIES 470

Raidentaylor wrote:
I tried but with no luck. 😕


for some reason it keeps defaulting to rainbow and I have it set to sync on colour cycle every first boot or re boot resets this and I have to go back into aura sync and change it all over again bit annoying as this never used to happen

vBDKv
Level 8
I had to install an older version as this didn't work with my motherboard at all.

I'ma gonna post my issue here, hope is the right place...

I'm using a CH7HWF along with a LIAN LI 011 Dynamic XL case.
This case has a front led strip that should be compatible with Asus Aura:



I've connected the case's 3-pin cable to the ADD_HEADER1 of the mobo but still does not work.
Should I set something else inside the program?
I wrote to Lian Li support and they told me their strip has 28 leds, so I went to the Setting tab, selected "Add strip-1" and input 28 as led number…. but still no control, the case strip is red fixed.
Aura version is v1.07.71.
Thanks.

Baio
CASE Lian Li 011D XL CPU AMD Ryzen 7950X3D COOLER Corsair H150i Elite Capellix MOBO Asus ROG Strix X670E-A Gaming Wifi RAM 2x16Gb Corsair Dominator Titanium 6000 [CMP32GX5M2B6000Z30] PSU Asus Thor 1200P VGA Asus ROG Strix RX 6900XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD NVMe Crucial T700 1Tb - WD Black SN850 4Tb INPUT Logitech Pro wireless + Powerplay + Corsair MM 700 RGB - Corsair K100

Baio73 wrote:
I'ma gonna post my issue here, hope is the right place...

I'm using a CH7HWF along with a LIAN LI 011 Dynamic XL case.
This case has a front led strip that should be compatible with Asus Aura:



I've connected the case's 3-pin cable to the ADD_HEADER1 of the mobo but still does not work.
Should I set something else inside the program?
I wrote to Lian Li support and they told me their strip has 28 leds, so I went to the Setting tab, selected "Add strip-1" and input 28 as led number…. but still no control, the case strip is red fixed.
Aura version is v1.07.71.
Thanks.

Baio


Solved.
Don't know why, don't know how but this morning I switched the pc on and the case's led has started syncing with Aura.
Maybe Aura needed a couple of reboots after setting the right led number for the strip.

Baio
CASE Lian Li 011D XL CPU AMD Ryzen 7950X3D COOLER Corsair H150i Elite Capellix MOBO Asus ROG Strix X670E-A Gaming Wifi RAM 2x16Gb Corsair Dominator Titanium 6000 [CMP32GX5M2B6000Z30] PSU Asus Thor 1200P VGA Asus ROG Strix RX 6900XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD NVMe Crucial T700 1Tb - WD Black SN850 4Tb INPUT Logitech Pro wireless + Powerplay + Corsair MM 700 RGB - Corsair K100

Raidentaylor
Level 8
Hi.
I'm using V1.07.71 and i usually use color cycle. But my motherboard stuck on red color and my graphic card work correctly. I don't know how to fix this. Tried to reinstall and delete lastprofile xml, but doesn't work.

Anyone have this issue? Thanks in advance.

My hardware:
- Motherboard: Asus Rampage V 10th edition
- Graphic card: Asus Strix GTX 1080ti OC

Matster187
Level 7
Hi there ASUS

I have a strange issue with Asus Aura / Asus Armoury Crate.

I suddenly noticed everything i was doing to be very laggy..... Then when i checked the Task Manager, the Asus Aura Lighting Service was using between 17 and 18% CPU, which was pushing my overall cpu usage to 20%.
I had initially only been using the Asus Aura software and didnt notice it was doing it... only since installing the Asus Armoury Crate did i see this issue.. I now consider it to be bloatware and nuked it from my system. (after all, i didnt want all the other junk, just the lights to be customizable, and it didnt so seem to want me to use the latest basic version of asus aura)

I raised it in a ticket and they said to post here..

my pc is..
Rog Strix z370-e (bios 2401)
I7-8700k ( watercooled aio)
32gb TRIDENT Z RGB 3200MHz (works with aura)
MSI Nvidia gtx 980 gaming 4g.
Windows 10 64bit pro v1909

I also have matching sets of Corsair rgb gear, Mouse, Keyboard, headset, stand and lighting node with 3x LL120 and 2x LL140 rgb fans.
The corsiar software runs fine and onlu uses between 01.-0.3% cpu.

I cannot share any screen shots as i nuked the software and stopped all the services... this cured the over usage of cpu.
No amount of reboots or power cycles made any difference.
I have performed AV scans to no avail.

Due to the black friday deals i did treat myself to a new 1TB nvme drive to boot from.. so i will be commiting to a fresh install of windows 10 as soon as i have the time. probably this weekend.

I appreciate I could not be more forth coming with information as I nuked the software.

Should I attempt to use the Armoury crate software when i do a fresh install or just use the Asus Aura software.... Im not interested in the game modes or adverts, just the lighting..!

And if possible, are you able to make the board compatible with Corsair Icue software. Theirs works briliantly.. or should i nuke my ram in favour of corsairs rgb so i can use it with their software?

I will do anything i can to help this issue get resolved.

Please advise..

Kind regards
Matt

MFalorca
Level 7
Asus software is worst and worst, every day!! Lack of support in many recent motherboards......etc!!

This make me think there's other alternatives I shoud consider.....

Matster187
Level 7
@MFalorca
Hi, Im thinking it be better to swap my g.skill ram for corsair and have it all thru the ICUE softrware, which i find to be brilliant...
I had hoped someone from asus would be watching this and replying.... but just like all companies now, they appear to start a forum so we all have to argue amongst ourselves and blunder around in the dark!!! Shame really.. their mobos are so nice but then they dont follow up; on here...

hexaae
Level 13
Hello,
I have a gaming laptop ASUS GL703GS with ROG Aura Core:


Is ROG Aura Core abandoned (freezes randomly under Win 10 with high CPU usage, and got no updates since a long time ago)?
Can I use this Aura Sync instead?
// ASUS SCAR18 G834JY, i9-13980HX, 4090 laptop 256bit 16GB, 32GB 5600MHz RAM, 18" 16:10 2560x1600 240Hz G-Sync internal screen, external UWQHD 3440x1440 Mi 34" Monitor with Freesync, NVMe, 8BitDo Arcade Stick, EasySMX X10 controller, ROG Strix Carry mouse.

Apito
Level 7
1. The BIOS/firmware version for your hardware.
2. The AURA SYNC products you own and any other 3rd-party lighting software.
3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
4. If you have tried reinstalling Aura or Windows already.
5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
6. Windows Edition, Version, and OS build.
7. If the same issue was present in the previous version(s).
8. State clearly the issue(s) you are experiencing.
Please Include a screenshot of the Aura UI, and any other pictures if applicable.


1. Bios version 1405, firmware 1.07.71 aura sync
2. Asus TUF GAMING X570-PLUS ATX AM4 Motherboard, Trident Z RGB Ram (4 sticks), Antec Prizm ARGB Fans.
3. If I restart the problem is fixed for approximately a day before it occurs again.
4. Tried several firmware versions.
5. no
6. Windows 10 Pro, 10.0.18363 build 18363 (version 1909)
7. Not sure, new PC, first time using Aura Sync.
8. While playing games, all of my aura sync lights flicker repeatedly. The only thing that stops the flickering is setting lighting to static and then restarting my computer. Once I restart, it is fixed for approximately a day before the issue occurs again.