While updating Asus Aura I suspect that during the process somehow the firmware for my motherboard RGB and Spatha Mouse became corrupted. Aura aside and all the problems and potential fixes I tried via Asus's Instructions as well as other tips and tricks. Even in Armoury I could not change the RGB in my mouse. It was set to the color Blue and in breathing mode same as the RGB on my mobo. Just tonight I was able to reset the firmware on my mouse using the three button/cord disconnect method and it works just fine now. Im suspecting that a part of the Aura issue might actually lie with the motherboard as I attempted to use a hard drive from one of my other PC's with a known working yet a little buggy version of aura. When connected I also could not get it to load but once it was back in my other PC the program functions ok. I was able to get Aura to work a couple of times on this PC but it would only recognize my GPU and no matter what I did there seemed to be no rhyme or reason to when it decided to work. All installations/uninstalls were done per Asus's instructions including using Auraclean. I have tried the power cord method and no results there as well. I have tried the Aura_Update flash back but when I run it in Cmmd Prmpt it keeps telling me no devices are found. I do not think anything is bad other then the firmware because as stated the RGB is stuck on a blue/breathing. I can also turn it on and off in the bios as well no issues. All drivers, bios are current. Any ideas would be greatly appreciated.
MotherBoard: Asus ROG Maximus Cod IX
Processor: Intel I7 7700K ( was stable OC at 4.9Ghz at 1.232V Until my dumb ass only backed up my OC profile as a .txt, Running stock for now)
AIO: TT 3.0 360
GPU: GTX 1080 TI O11G
Mouse: ROG Spatha
KeyBoard: ROG Claymore
16 GB Corsair 3000Mhz DDR4 Ram
PSU: TT Toughpower Grand Series 850W Gold
Windows 10 Pro
Armour V 2.06.06
Aura: 1.07.22 (Non Working)
Bios: 1301
Case: TT View 71 TG
Case Fans: Enermax T.B RGB 120mm
Whats funny, is in the past I used to have Major Problems with Armoury. I hardly used it except to keep Keyboard and Mouse Firmware up to date. Everything was working just fine with Asus Aura maybe around Dec/Feb Aura Release. And I was controlling all RGB with that probram. I really would just like to use one program to control them all (Non intentional Nerd Reference) as its a pain in my ass to have to jump between Fan remote, Armoury, Aura_GPU (Works fine when I tested it) That's primarily also why I got rid of all my Riing Fans in favor of the Enermax since they are Aura Compatible. And I haven't even able able to utilize them as intended since I bought all eight of them. Thanks guys, take care.
Edit: As a side note, I would really like to get this Aura issue resolved as I would like to buy a Thor 1200p and Ryujin 360 AIO once they hit the US Domestic Market (Been waiting since Q3 Asus) But if I cant get the issue resolved I may just build a custom loop and keep my TT PSU
