cancel
Showing results for 
Search instead for 
Did you mean: 

Armoury Crate Stuck in update loop

alibazlamit
Level 8
In short the Armoury Crate is stuck updating my ROG STRIX FUSION 500 Device SDK.
It has been like this for months now and i can't change my headphone audio settings. It just downloads the update and installs it and asks for a reboot of the system.
After the reboot i am back to the same attached screen and this is an infinite loop that seems to never end.

Has anyone faced the same issue and if so how can i fix it?
2,150 Views
28 REPLIES 28

Super_Gnome
Level 11
In my case, I gave up on RGB lighting--and only cared for a little while. I now never look at my case and could not care less.

My system works perfectly now with no Asus software. A Windows reinstall (without ever installing Armoury Crate again) is easy to do, with no need to format. You can do it from "Settings" on your Windows menu. At "Settings" select "Update & Security," and then "Recovery." On the "Recovery" page, and under 'Reset this PC" then hit the "Get Started" tab and it will guide you through a quick process that will rid you of troubles. Once you are done, do not install any Asus software like Armoury Crate, and never do that again. This assumes, as above, that you can navigate the Bios, which is not hard. It also assumes you don't care about Aura or RGB, which in my opinion is just cosmetic anyhow, and has no bearing on how your computer functions.

Hopefully this helps. As far as I'm concerned, all of the Asus software like Armoury Crate is simply this: Marketting bloatware, and that is at best. Over time it stops working and can even create problems.

Lastly, if you want to be sure you have the latest firmware and updated software from Asus--Armoury Crate and other bloatware aside, you can check the page for your motherboard. I have the page bookmarked and check it daily for any new updates. By firmware and software, that is:
stuff like the latest BIos, Audio, Lan updates, etc.

Queso
Level 7
So I created a new user and ran the update under that user and seemed to fix it. Good luck.

Queso wrote:
So I created a new user and ran the update under that user and seemed to fix it. Good luck.


I just tried this and it seems to have worked. Appreciate it.

Queso wrote:
So I created a new user and ran the update under that user and seemed to fix it. Good luck.


Could you please remember the exact steps to creating a new user. I have tried that with two new users and it did not work for me?

alibazlamit wrote:
Could you please remember the exact steps to creating a new user. I have tried that with two new users and it did not work for me?




hey guys !! you must reset your windows (without reset your personel document ),no any choise.
GLHF hhh

Queso
Level 7
Did this work for anyone else?

Queso
Level 7
I PM'd you Alilbazlamit.

macmus
Level 7
same issue in crosshair 8 due to Armory Crate.

i had the same **** , i downloaded this one https://www.techpowerup.com/download/visual-c-redistributable-runtime-package-all-in-one/ and run the install_all.bat as ADMIN
some Runtimes wasnt installed, now it works again finaly