03-30-2020
06:21 AM
- last edited on
03-05-2024
08:14 PM
by
ROGBot
03-31-2020 01:43 AM
TinyAcc wrote:
Installing Armoury Crate through proper means (or a newer version of AURA than 1.06.xx) causes the software not to recognize my motherboard and or claim it isn't supported. I am running a setup with:
-ROG Z390-F GAMING (should be supported)
-i7-9700K
-32 GB G.Skill Trident Z RGB
The RAM gets detected but motherboard doesn't on AURA version 1.07.xx and Armoury Crate.
Armoury Crate can't install HAL update for the mobo and prints out "Code 12" error. Manually installing AURA aac components causes the system to claim it's forbidden by system policy, but I am running admin on the PC and DisableMSI is set to 0.
Any help to achieving a working Armoury Crate would be appreciated.
03-31-2020 06:48 AM
emsir wrote:
Armoury Crate and Aura are the worst software Asus have made. I have ICUE installed (great software for corsair Ram and AIO cooler - and lately for ASUS motherboards.) I couildn't get the led on motherboard to work with ICUE.....got random BSOD. Found out AURA and ARMOURY CRATE was the problem.
Uninstalled both ASUS **** software, and now my ASUS motherboard shows up in ICUE and I can change LED colours on my motherboard. Works great......and NO BSOD!
Think about it. ASUS made a great motherboard, but the software creates problems and doesn't work.
My next Intel motherboard wil be Gigabyte....I'm done with ASUS......my trusted company for over 10 years....
04-01-2020 02:26 AM
TinyAcc wrote:
I've had the BSOD as well. stornvme.sys failure for me with newer versions of AURA Service. AURA 1.06.17 works for me though. Thing. But iCUE can handle Asus mobos? What about DRAM?
04-02-2020 02:49 PM
TinyAcc wrote:
Installing Armoury Crate through proper means (or a newer version of AURA than 1.06.xx) causes the software not to recognize my motherboard and or claim it isn't supported. I am running a setup with:
-ROG Z390-F GAMING (should be supported)
-i7-9700K
-32 GB G.Skill Trident Z RGB
The RAM gets detected but motherboard doesn't on AURA version 1.07.xx and Armoury Crate.
Armoury Crate can't install HAL update for the mobo and prints out "Code 12" error. Manually installing AURA aac components causes the system to claim it's forbidden by system policy, but I am running admin on the PC and DisableMSI is set to 0.
Any help to achieving a working Armoury Crate would be appreciated.
04-03-2020 07:06 AM