cancel
Showing results for 
Search instead for 
Did you mean: 

ArmoryCrate UPDATE aio is back in control 10/14/2019

MrAgapiGC
Level 13
Rogers.

Today a update has being push to the ARMORY CRATE users.

Please. make the the update as it appear and take notes as follows IF you have some issues

Notes.
1. DO NOT USE any type of windows registry programs. (sorry: I do not care, Just do not use it)
2. There are 2 update. and boot it appears that is not working. IF on restart appears again MAKE again the update. (should be 2 )
3. In the case the 3 reboot and some missing modules like the aio. follow my fix below. (we are working to make a runtime inside the app with my fix since is working 99% of the times and has being test)
4. I repeat again. DO NOT USE any type of registry cleaning programs with Armory Crate. These is NOT a app to control lights. Is a app to reprogram a ROM base application to the AURA chip on our board. it is call the AURA CHIP.
5. Most issues are related on legacy boot. Make sure that UEFI is all the way. (CSM disable and UEFI BOOT ONLY)
6. these is test made using 100% asus products. I have NO idea if these work on a stand alone app like using another brand of products like motherboard gpus etc hybrid use i have to take notes. Please i want to hear these from all)

I am using 100% OEM drivers from my CODE XI. I will test these on the Formula XI and HERO XI since i have my own testing team with 100% identical machines. For the moment no x570 so i have to digg my own group on Facebook to check on those feedback. the app is available as a stand alone with the aio and some new devices. I think the ROG ARMORY will eventually support legacy products only. and i suspect these is the route to be follow. I do not work with ASUS or get paid. I am just a user that all that offer my free time to check debug and test the app since the ArmoryCrate start last year.

I will take ONLY z390 (ROG TUFF) and I will create a post ONLY for these. Please be gentile and direct since I am reporting to specific people that want these work. x570 make sure last bios is in, CSM DISALBE and full UEFI is in. These is importat. On AMD everyone as to be there anyways. Unless you are using LINUX that requiere legacy. for that I am sorry no idea if these can work. but so far is UEFI all the way.

Also and just in case. These are the list of working (10/14/2019) peripherals compatible. For the moment until i can get some cash i can not test the monitor functions. But some DO appear since my best friend has one. Eventually i will get more gear to test.

Some new modules will be added to the audio department and some fan control but we need to be patience.

For the users that starting to use the Armory Crate. In order to these to work. you have to uninstall (DO NOT use cleanners) the aura app before using the crate.

1. open c
2. open program files (x86)
3. open lighting service
4. delete file name LastProfile.XML
5. empty recycle bin
6.Open Services (windows logo type services
7. Find LightingService and restart that service, and restart the computer. IF the service is stop start the service and right away restart and restart the computer.

List of compatible peripheral. NOTE the Spatha will NOT make the list. The Clarymore is still on works, I will ask later but i think will not make the list. Here is the list

Keyboard
ROG STRIX Flare / ROG STRIX Scope / ROG STROX Flare COD / ROG STRIX Flare PNK

Mouse:
ROG Gladius II Origin / ROG Gladius II / ROG STRIX Impact / ROG Gladius II Origin COD / ROG Gladius II Origin PNK

Mouse Pad:
ROG Balteus Qi (ONLY for the moment)


There is still a lot to be done.
1. Armory crate at boot there is some idle. YES not much. 10% you will see a some power on red. On idle is 2.3% and use 12.6mb of memory and around 1% of gpu.
2. Some functionally is still buggy and does not affect
3. on keyboard and mouse that are link to aura, will NOT be accessible until aura is sync. that is why on keyboards compatible there is a module for MACROS. and on the aio the light tap is void until the aura is link. the rest will work independent of the aura is sync or not.
4. I have to test the mouse. I have 1 in coming from the list, So i can test the module.

Aside these thanks. asorry for my English.
Learn, Play Enjoy!
415 Views
150 REPLIES 150

MrAgapiGC wrote:
No idea. I afraid to check. Worst case scenario a complete shutdown and remove power sata and usb fix it


Still does not work. So after the reset (pull the plug) I can adjust everything again, but as soon as I press 180 ° button it freezes ...

Grischkow wrote:
Still does not work. So after the reset (pull the plug) I can adjust everything again, but as soon as I press 180 ° button it freezes ...


Thanks. I all ready test that today and send the report very early today with other points of interest
Learn, Play Enjoy!

Also...after succsessfully Z390A BIOS-Reset
Armoury install....inc. all newest updates
a few restarts

i´ll stop wasting my lifetime
Now....it´s time to say goodbye...never ever again...
gratulations ASUS for this grandious performance

I take a downgrate with my old airflowcooling scythe katana
and when i buy the Intel i9
Buy a Watercoolingsystem from Alphacool without buggy controllsoft

MrAgapiGC wrote:
Thanks. I all ready test that today and send the report very early today with other points of interest


ok i updatet fw to 0204. niw its fine. BUT now its blinked every 3-4 sek 😞

Grischkow wrote:
ok i updatet fw to 0204. niw its fine. BUT now its blinked every 3-4 sek 😞


is ok. the idea of that is to avoid the burn in effect. that was detected. is not blink is the 3 4 sec, if more notable on hardware monitor since the time for each reading is 4seg and have that impression. I send a note to Dev to reduce the timing in millisecond. also the gif is faster so it can be seeing in that time frame.

and also fix the 180..
Learn, Play Enjoy!

MrAgapiGC wrote:
is ok. the idea of that is to avoid the burn in effect. that was detected. is not blink is the 3 4 sec, if more notable on hardware monitor since the time for each reading is 4seg and have that impression. I send a note to Dev to reduce the timing in millisecond. also the gif is faster so it can be seeing in that time frame.

and also fix the 180..


love you!

Got a Problem with Ryujin 360, sometimes on windows startup oled screen stays on logo image and doesn't feature the temp as I configure before turning off the PC, and other times after some hours of use the Ryujin stucks at a fan speed and a temp measure that i have to open armoury crate and establish the default settings of Ryujin so it can measure everything well again, how can i fix this?

FYI: I used Revo Uninstaller to delete some things on the registry after unistalling aura and armoury crate, but I reinstalled Armoury crate after this, I saw this post after done all of this.

Darthpibe wrote:
Got a Problem with Ryujin 360, sometimes on windows startup oled screen stays on logo image and doesn't feature the temp as I configure before turning off the PC, and other times after some hours of use the Ryujin stucks at a fan speed and a temp measure that i have to open armoury crate and establish the default settings of Ryujin so it can measure everything well again, how can i fix this?

FYI: I used Revo Uninstaller to delete some things on the registry after uninstalling aura and armory crate, but I reinstalled the Armoury crate after this, I saw this post after done all of this.


We are working on that and testing.

my friends in arms came that a probable memory leak of some sorry, a bios issues since IF the XMP is disable, does not frooze. I even I am using a not realease AIOHAL. i am testing these 24h and getting all sides to send to developers. is RAMDOM z490 and z390 is ramdom on diferent scenarios. in you case also is diferent. I got fix not frooze for 11h. but on xmp disable ... well there it is. on any way, still, a windows issue that need to be patch and maybe a new firmware. also is a mix. I am wokring hard so they can have all data posible

As soon i have something I will post on the main root.

NOTE. DO NOT USE ANY CLEANERS.
Learn, Play Enjoy!

MrEWhite
Level 7
Even after rebooting, it infinitely loops it's update for my Ryujin 360.

KILLER_K
Level 10
Indeed. No heads up, nothing about what is actually going on here. Just a broken mess from Asus update after update. How hard is it to use something on my board that I actually paid for in 2019? All their RGB software is broken, PERIOD!