AI Suite 3 Version 3.00.10 & 3.00.13 - user test/report thread

[MasterC]

Please check the product support page for your board and download Ai Suite 3.00.14 or 3.00.13 (if available).


If you have a Ryzen-based system:

Ai Suite 3.00.13 updated for compatibility with Ryzen power plans (no other changes):

https://drive.google.com/file/d/14NC...ew?usp=sharing

[hpuser568]

scryed wrote:
Hi ,*

Firstly sorry my engl is not that good

This beta installed on my rampage v extreme ( the original 🙂 just fine but it seems i encountered some bugs or I did something wrong

-did a normal uninstall of the older version ( didn’t use the special tool afterwards to remove possible leftovers)
-did a reboot
-installed the beta
-reboot and it works

Now my possible bugs

1. it seems i can’t change the location of the fan ( only on the cpu Fan I could change the location and description)
*

2. for some reason I don’t know I can’t adjust any other fan than the cpu fan below 60% fan speed below 60% the field is red marked , any speed above I can change just fine , within the bios the chassis fan are set to „DC *Modus“ *,on the software within windows10 the chassis fan are fix on smart modus *, i could change the chassis fans within the bios to pwm mode but than they stop turning and I can’t start them within windows*
*
*

hi, sorry also for my english same motherboard RAMPAGE V EXTREME as Scryed and same result as you...
for the 60 % , i have to make PWM in bios but not the good choise for my fans...
i make all "DC" in type fans and it's good but 60% of limit...
I d'ont have choice to make where is the localisation of fans chassis (up, rear, front) only the fan cpu
bye

[Forna]

hpuser568 wrote:
hi, sorry also for my english same motherboard RAMPAGE V EXTREME as Scryed and same result as you...
for the 60 % , i have to make PWM in bios but not the good choise for my fans...
i make all "DC" in type fans and it's good but 60% of limit...
I d'ont have choice to make where is the localisation of fans chassis (up, rear, front) only the fan cpu
bye

I was the first reporting this, now we are in 3.... is this a bug?

[Three_of_Twelve]

I have no Problems with this Version of AISuite and my Maximus VIII extreme.

[wookash]

I just installed it and configured my fans, seems to work ok so far on hero VII

[EDIT] Iit crashed after a few hours, below details from windows event log (aorry for Polish)

System

- Provider

[ Name] Application Error

- EventID 1000

[ Qualifiers] 0

Level 2

Task 100

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2018-01-05T23:13:19.444186300Z

EventRecordID 2083

Channel Application

Computer wookash-PC

Security


- EventData

AISuite3.exe
1.0.0.0
00000000
unknown
0.0.0.0
00000000
c0000005
dddddddd
5b8
01d3865d2f32654c
C:\Program Files (x86)\ASUS\AI Suite III\AISuite3.exe
unknown
7c77be96-c257-4bbe-a86b-797e37b97cb5


Nazwa aplikacji powodującej błąd: AISuite3.exe, wersja: 1.0.0.0, sygnatura czasowa: 0x00000000
Nazwa modułu powodującego błąd: unknown, wersja: 0.0.0.0, sygnatura czasowa: 0x00000000
Kod wyjątku: 0xc0000005
Przesunięcie błędu: 0xdddddddd
Identyfikator procesu powodującego błąd: 0x5b8
Godzina uruchomienia aplikacji powodującej błąd: 0x01d3865d2f32654c
Ścieżka aplikacji powodującej błąd: C:\Program Files (x86)\ASUS\AI Suite III\AISuite3.exe
Ścieżka modułu powodującego błąd: unknown
Identyfikator raportu: 7c77be96-c257-4bbe-a86b-797e37b97cb5
Pełna nazwa pakietu powodującego błąd:
Identyfikator aplikacji względem pakietu powodującego błąd:

[Dimitrios1971]

Loaded, installed, configured optimally ...

[Spudley]

Dimitrios1971 wrote:
Loaded, installed, configured optimally ...

Hmmm after looking at that I'm starting to think that my certificate problem is actually GPU tweak (version 1.4.5.2) one ,as I dont get the linked VGA card details in the new AiSuite bottom panel for speeds/voltages/Temps. yet if I stratup with the verification disabled it does show up in the Suite for my 980.

Next problem...can i find a GPUtweakII download link anywhere.....can i hell. The main asus support download site just sits there at the select operating system pull down, or is that because the latest version is also broken just like Aisuite3 was?

[PerpetualCycle]

Thanks! AIsuite is running again for my Hero VI Z87 board with the KPTI patch.

One feedback on AIsuite. Can't you save the fan profiles and calibration when DIP is updated? I have to save them, update, restore them, then restart the services.

[Gobbo]

geneo wrote:
Thanks! AIsuite is running again for my Hero VI Z87 board with the KPTI patch.

One feedback on AIsuite. Can't you save the fan profiles and calibration when DIP is updated? I have to save them, update, restore them, then restart the services.

Current and custom profiles are usually located in C:\ProgramData\ASUS\DIP\FanXpert\Profiles

[Hopper64]

Noticed my fans with the new beta AISuite increased correctly under load, but they did not go back down after the load was finished.

[jimo2002]

Hey

Its working on my Rog Strix X370-F Gaming...

However, i have to uninstall, reboot, run the AI cleaner, reboot, run a registry cleaner, reboot and then install the new version.

Also I find it funny how ASUS have reverted back to the Large mini bar button.... 😄

J