cancel
Showing results for 
Search instead for 
Did you mean: 

AI Suite 3 Version 3.00.10 & 3.00.13 - user test/report thread

MasterC
Community Admin
Community Admin
Please check the product support page for your board and download Ai Suite 3.00.14 or 3.00.13 (if available).


If you have a Ryzen-based system:

Ai Suite 3.00.13 updated for compatibility with Ryzen power plans (no other changes):

https://drive.google.com/file/d/14NC...ew?usp=sharing

_____________________________________________________________
FPS, Racing, and VR Gamer / Tech Enthusiast / ROG Admin
289 Views
1,154 REPLIES 1,154

Where should the gpu be reported? Only in TPU setting?

SirRobin wrote:
Where should the gpu be reported? Only in TPU setting?


TPU and in the fan configuration, for example you can set the chassis fan speed depending on the CPU, Motherboard and GPU temperature, so if the GPU is hot you can turn all the fans at full speed, in my case this reduce a lot the temperature of the GPU just when it is necessary and when not it mantain silent the system.

gabrielgc75 wrote:
TPU and in the fan configuration, for example you can set the chassis fan speed depending on the CPU, Motherboard and GPU temperature, so if the GPU is hot you can turn all the fans at full speed, in my case this reduce a lot the temperature of the GPU just when it is necessary and when not it mantain silent the system.


Ok, so i can see the GPU in TPU Part but nothing in fan configuration...

SirRobin wrote:
Ok, so i can see the GPU in TPU Part but nothing in fan configuration...


Before the update I could see the GPU in both places, se the attached picture

I get an error "CreateProcess failed (193)" when trying to install the version listed for my mobo, Z170-A. I really liked the Fan Expert software when it worked.

Edit: The install goes through pushing past this error couple more times. After install is complete and reboot, receive another error as program opens. Something to the effect of "Unknown name". Opening the program, I get an error when navigating to any of the applications. "Access violation at address"

Works without any issues on a Prime Z270-P and the BIOS revision 0812.

All tools are functional under Windows 10 Pro 64-bit with the latest fixes from Microsoft.

Z170 PRO GAMING/AURA using Win8.1 here. Anyone try 3.00.13 on this board yet? I downloaded it from the support page under the Windows 10 page (since the 8.1 doesn't have it and probably won't), but I want to hold off trying it until others have had success.

I was planning on just running asussetup.exe and installing over the Beta. Will doing so keep FanXpert3 and my current settings? To be honest just installing the Beta was a nightmare.

THANK YOU ASUS PROGRAMMERS!
been using it for a week now and recalibrated my 5way and it is the same result as last year before the bugs. and adaptive voltage is working perfectly on idle and during gaming/working. love you guys! software does it 10x quicker than my manual clocking. saves alot of time with some manual adjustments in the BIOS later.

the dual intelligent processors 5 is working perfectly now! 😉 love this software btw! only reason i got ASUS boards

on my X99 Deluxe 3.00.10 works better

sblantipodi wrote:
on my X99 Deluxe 3.00.10 works better


Only now I see that there are some motherboard's pages that let you download the

AI_Suite_III_3.00.13_PPSU_1.05.13

and some other motherboard's pages that let you download the DIP5 version

AI_Suite_III_3.00.13_DIP5_1.05.13

I don't know the difference between the PPSU and the DIP5 but on my X99 Deluxe the DIP5 works well.