AI Suite 3 Version 3.00.10 & 3.00.13 - user test/report thread

[MasterC]

Please check the product support page for your board and download Ai Suite 3.00.14 or 3.00.13 (if available).


If you have a Ryzen-based system:

Ai Suite 3.00.13 updated for compatibility with Ryzen power plans (no other changes):

https://drive.google.com/file/d/14NC...ew?usp=sharing

[MisterEd]

MBD: ASUS PRIME X370-PRO
CPU: AMD Ryzen 1700X
AI Suite III 2.00.16

I was having the same problem with AI Suite III after the Windows 10 updates. I did the following:
1. Uninstalled and reinstalled AI Suite III 2.00.16 -> still crashing
2. Uninstalled AI Suite III 2.00.16
3. Installed AI Suite III 3.00.10 -> it appears to work
4. Uninstalled the new Windows 10 updates
5. Uninstalled AI Suite III 3.00.10
6. Reinstalled AI Suite III 2.00.16 -> it appears to work again
7. Reinstalled the new Windows 10 updates -> AI Suite III 2.00.16 is still working ???

Can someone explain why the old version of AI Suite III is now working with the Windows 10 updates?

[devxterminatr]

Hi,
This beta version got installed in the latest windows 10 pro 1709 but the problem whenever I am running 5-way optimization I can only overclock to 4.3 GHz and it is not allowing anymore. I got 4.7 GHz previously in the previous AI suite 3.

[Seizantherealon]

Crosshair VI Hero
Ryzen 7 1800X
RX Vega 64
Hyper X 2400 8GB (lol temporary^^)

1 .Uninstalled old Suite
2. Restart
3. Al3Cleaner
4. Restart
5. Installed Beta Version
6. Restart

Works w/o any fail or bugs.

[Pottypotsworth]

Seizantherealone wrote:
Crosshair VI Hero
Ryzen 7 1800X
RX Vega 64
Hyper X 2400 8GB (lol temporary^^)

1 .Uninstalled old Suite
2. Restart
3. Al3Cleaner
4. Restart
5. Installed Beta Version
6. Restart

Works w/o any fail or bugs.

Hi there, could you link me to the AI3Cleaner you used, please? I cannot get any version of Aisuite to load properly and I am not sure the cleaner is even working as the "DOS" screen just pops up for a fraction of a second. Many thanks.

[Seizantherealon]

Pottypotsworth wrote:
Hi there, could you link me to the AI3Cleaner you used, please? I cannot get any version of Aisuite to load properly and I am not sure the cleaner is even working as the "DOS" screen just pops up for a fraction of a second. Many thanks.

https://rog.asus.com/forum/showthread.php?95038-AI-Suite-3-cleaner

[katlani]

That small command prompt window was also visible for a split second on my end when i first tried it, so not sure it is indeed doing anything..

[Proshka]

H87-Plus
Win10 x64

AI Suite 3 Beta started working after a clean install (used AI3Cleaner)

[Code_Frenzy]

katlani wrote:
That small command prompt window was also visible for a split second on my end when i first tried it, so not sure it is indeed doing anything..

It is often better, more complete to run the installer in Windows Safe mode, it wasn't installing some programs for me until I did this as they were locked by the system.

[alexnt]

I have installed the new beta and then updated to the new final version BUT "source" is missing for any of the fans, so is thermal zone setting(hardware cooling priority). All the fans refer to the cpu temp. My board is z97 mk2.
Also, the chassis fans do not spin up even I stressed the pc with unigene valley, heaven and real bench. They stay at the lowest value.
The other issue I have an has been, also, mentioned by others in this topic is that there are 500000 handles in task. Before there were 100000 max while idling.

[Pottypotsworth]

Seizantherealone wrote:
https://rog.asus.com/forum/showthread.php?95038-AI-Suite-3-cleaner

Thank you 🙂