cancel
Showing results for 
Search instead for 
Did you mean: 

W11 24h2 and Crate

Hopper64
Level 15

Did a fresh install of W11 24h2 and crate was fine for 2 days. Booted the PC this evening and the lighting effects are all over the place. I have set one color red but rainbow effects are evident for the motherboard and attached LEDs to the motherboard. Peripherals seem to be following the one color. This is quite strange. Notably, coming from 23h2, I would have problems occasionally but not to this degree. ??? Ideas??

MZ790AE Bios 1703, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro
674 Views
7 REPLIES 7

Hopper64
Level 15

Here are installed components for crate:

Item Version
---- -------
Armoury Crate UWP App 5.9.9.0
ROG Live Service 2.4.24.0
Aura Service (Lighting Service) 3.07.54
Armoury Crate lite service 5.9.9
Aura Wallpaper Service 1.7.3.0
Aura SDK 3.04.46
ArmouryDevice 4.2.0.4
ASUS AIOFan HAL 1.4.0.0
ASUS AURA Extension Card HAL 1.1.0.20
ASUS AURA Motherboard HAL 1.5.0.2
ASUS Aac_GmAcc HAL 1.0.12.0
ASUS Ambient HAL 4.2.0.0
ASUS Keyboard HAL 1.2.86.0
ASUS Mouse HAL 1.2.1.6
ASUS MousePad HAL 1.0.3.5
AacAudioHal 1.3.79.0
AacDisplay 1.2.38
AacVGA 0.0.7.0
KingstonDram 1.1.36
AURA DRAM Component 1.1.27
ENE RGB HAL 1.1.53.0
ENE_EHD_M2_HAL 1.0.13.0
Patriot Viper DRAM RGB 1.0.9.8
Patriot Viper M2 SSD RGB 1.1.0.3
Universal Holtek RGB DRAM 1.0.0.7
WD_BLACK AN1500 1.0.14.0
AIOFanSDK 3.00.21
AiSuiteSDK 1.02.12
AudioSDK 3.01.27
GameFirstSDK 6.2.7.0
KeyboardSDK 3.00.78
MainSDK 2.01.29
MbLedSDK 3.00.34
MousePadSDK 1.03.00
MouseSDK 3.01.43
VgaSDK 1.00.21
Armoury Crate Plugin - Aio 2.0.18
Armoury Crate Plugin - Headset 1.2.19
Armoury Crate Plugin - Keyboard 1.3.7
Armoury Crate Plugin - Motherboard 1.2.20
Armoury Crate Plugin - Mouse 2.3.3
Armoury Crate Plugin - Mousepad 1.2.3
Armoury Crate Plugin - ROG FAN XPERT 4 2.0.12
Armoury Crate Plugin - Vga 1.0.4
ASUS Motherboard 4.03.01
Aura Wallpaper HTML 1.7.3.0
GameFirst 1.6.1
ROG BALTEUS 4.01.04
ROG CLAYMORE II 4.01.08
ROG CLAYMORE II (2.4GHz) 4.01.08
ROG FAN XPERT 4 4.02.04
ROG GLADIUS III WIRELESS 4.01.03
ROG GLADIUS III WIRELESS (2.4G) 4.01.03
ROG GLADIUS III WIRELESS (BLE) 4.01.03
ROG THRONE QI 4.01.08
VGA 3.01.05

MZ790AE Bios 1703, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

siposnorbert71
Level 10

I also have the same problem, it always returns to the rainbow color. but even after this, the polyomo lighting of my hero motherboard always resets, so that even after the machine is turned off, it turns on manually after every start, I have to turn it off in the gun case

Hopper64
Level 15

That’s what mine is doing also. It does not respond to the setting assigned to it. Are you running 24h2 as well?

MZ790AE Bios 1703, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

rickycheng
Level 7

Found out my aura setting when turn off the computer were not saved properly after my recent install of 24H2 , maybe that is why it always reset after a reboot(rainbow color.is the default one)

Item Version
---- -------
Armoury Crate UWP App 5.9.9.0
ROG Live Service 2.4.24.0
Aura Service (Lighting Service) 3.07.54
Armoury Crate lite service 5.9.9
Aura Wallpaper Service 未安裝
Aura SDK 3.04.46
ArmouryDevice 4.2.0.4
ASUS AIOFan HAL 1.4.0.0
ASUS AURA Extension Card HAL 1.1.0.20
ASUS AURA Motherboard HAL 1.5.0.2
ASUS Ambient HAL 4.2.0.0
KingstonDram 1.1.36
AURA DRAM Component 1.1.27
ENE RGB HAL 1.1.53.0
ENE_EHD_M2_HAL 1.0.13.0
Patriot Viper DRAM RGB 1.0.9.8
Patriot Viper M2 SSD RGB 1.1.0.3
Universal Holtek RGB DRAM 1.0.0.7
WD_BLACK AN1500 1.0.14.0
AIOFanSDK 3.00.21
AiSuiteSDK 1.02.12
MainSDK 2.01.29
MbLedSDK 3.00.34
Armoury Crate Plugin - Aio 2.0.18
Armoury Crate Plugin - Motherboard 1.2.20
Armoury Crate Plugin - ROG FAN XPERT 4 2.0.12
Armoury Crate Plugin - Vga 1.0.4
ASUS Motherboard 4.03.01
ROG FAN XPERT 4 4.02.04

 

Hopper64
Level 15

My settings are not saved either. I think it’s some bug between 24h2 and crate.

MZ790AE Bios 1703, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

inge70
Level 13

So for me everything works as it should with 24H2 and ArmouryCrate.
When I start the PC I first see the rainbow effects (case-fan, AiO, motherboard and graphics card), which are standard. As soon as Windows starts it goes to my settings, which I have set as follows:
Profile "Smart" -> and then "CPU temperature" as the temperature sensor. Here then "yellow" from 50 degrees and "red" from 80 degrees.
When I turn off/shut down the PC, the motherboard display of the logo is turned off so that all RGB are off.
I only set the color of my Corsair RAM once using ICUE and saved it on the hardware side so that I could uninstall ICUE again and the "matrix display" (like in the film on their monitors) stays that way permanently.

Screenshot 2024-10-05 133011.png
However, this means that I can't change anything using Aura Sync, as I also uninstalled the Corsair plugin for AuraSync so that the RAM always lights up as set.
So far everything is working perfectly and as I set it up.

Here is my ArmouryCrate component list:

Item Version
---- -------
Armoury Crate UWP App 5.9.9.0
ROG Live Service 2.4.24.0
Aura Service (Lighting Service) 3.07.54
Armoury Crate lite service 5.9.9
Aura Wallpaper Service Nicht installiert
Aura SDK 3.04.46
ArmouryDevice 4.2.0.4
ASUS AIOFan HAL 1.4.0.0
ASUS AURA Extension Card HAL 1.1.0.20
ASUS AURA Motherboard HAL 1.5.0.2
ASUS Ambient HAL 4.2.0.0
AacVGA 0.0.7.0
KingstonDram 1.1.36
AURA DRAM Component 1.1.27
ENE RGB HAL 1.1.53.0
ENE_EHD_M2_HAL 1.0.13.0
Patriot Viper DRAM RGB 1.0.9.8
Patriot Viper M2 SSD RGB 1.1.0.3
Universal Holtek RGB DRAM 1.0.0.7
WD_BLACK AN1500 1.0.14.0
AIOFanSDK 3.00.21
AiSuiteSDK 1.02.12
MainSDK 2.01.29
MbLedSDK 3.00.34
VgaSDK 1.00.21
Armoury Crate Plugin - Aio 2.0.18
Armoury Crate Plugin - Motherboard 1.2.20
Armoury Crate Plugin - ROG FAN XPERT 4 2.0.12
Armoury Crate Plugin - Vga 1.0.4
ASUS Motherboard 4.03.01
ROG FAN XPERT 4 4.02.04
VGA 3.01.05

For me, everything is going perfectly so far.

Intel Core i7 13700K / AiO Fractal Design Lumen S36 v2 RGB / Asus Rog Strix Z790-F Gaming WIFI / Corsair Dominator Platinum DDR5-5600 64GB (4x 16GB) / Asus TUF RTX 4070 ti OC / 4x Samsung 980 pro 1TB / Seasonic Prime GX 850 W Gold / Fractal Design Meshify 2 Lite RGB Black TG Light Tint / Monitor AOC Q27G2S/EU (WQHD)

Mine worked fine on 24h2 for 2 days and is now not keeping my settings at all. It was flawless for those 2 days only. Really didn’t have much issue under 23h2.

MZ790AE Bios 1703, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro