Newest Armoury Crate blocking FanXpert in AI Suite III at boot?

[flyinion]

Anyone else having this problem since the latest Armoury Crate update?  Normally on boot FanXpert automatically sets my last loaded fan profile which is customized and saved with a custom name since it won't let you overwrite the default 4 Asus ones.  Since updating AC the other day to the latest one, now when I reboot this does not happen and it actually seems to be loading one of the default profiles. 

This is immediately obvious because my BIOS  profile like my custom FanXpert one is set to use the water temp in my loop to base the speeds off of.  This usually results in a very steady fan speed, but on boot the fans are up and down all over so it has to be using one of the default ones that is based off CPU temp.  I have to manually go into AI Suite and FanXpert and load my desired fan profile now.

I'm not sure if my copy of Amoury Crate is not installed right as well or the Crosshair VIII Hero just isn't supported by it properly, but I've seen screenshots in here about FanXpert where people seem to be able to created/edit profiles INSIDE Armoury Crate.  I don't see FanXpert in AC at all though, just the Info dashboard shows a panel with the 4 default FanXpert profiles but no way to edit or add new ones.

[Bgunner]

After a restart the BIOS Q-Fan settings are not what are used so Fan Xpert is overriding it. 

[flyinion]

Right, but after the latest update to Armoury Crate, something is blocking FanXpert in AI Suite 3  from loading the correct profile at boot. 

[Bgunner]

There has been a plus since I uninstalled and reinstalled AC. Before when the system went to sleep and woke up again the lights would freeze for about a 1.5 seconds and then pick up where the lights would have been. A bit annoying when the rings on my fan would skip like that but now they work as they should after resuming from sleep mode. 

So there is a plus to the new update they did to AC but that issue is much less annoying than the fan issues that cause my temps to higher. 

[flyinion]

Maybe I should try an uninstall/clean/reinstall then.  The latest one all my lights flash 2-3 times on and off when waking my monitors up (PC does not go in standby just my monitors).  Every time it does that lightingservice adds about 1000 handles to itself.  I did report that in the main thread already though.