Fan expert 4 does not save source

[AngEv1L]

The setting from which thermal sensor to take data from chassis fan 1 is not saved after the system is rebooted. Every time you have to go into the program and change it, and all the time the CPU is automatically set there.

[MrAgapiGC]

let me check on that using the same channel source. what sensor you select. In my case i remove the cpu and put motherboard since i have gpu also reading. I will report back in a few hours. 

[MrAgapiGC]

Just arrive and turn on the pc. the sensor that I change, still is i left it. 

[AngEv1L]

I use dram sensor on ddr5

[MrAgapiGC]

the ram sensor was reported some time ago. once selected will remove on restart or turn on the pc. that i mentioned and reported it. there was a update today let me test again. But if that was the one with issues, why did you not say it?

let start again

[AngEv1L]

Can you use only one sensor for test? not CPU and 1 more

[aegeus]

I'm having the same issue. I use chassis 3 fan as a ram cooling fan and whenever I select ddr temp in armoury crate it does not save it. Every time after rebooting it switches to cpu again. I also can't select temp source as ram in bios it doesnt show up there. The default temp source for chassis fans are cpu so I guess it just overwrites it. Would be great to have a fix for it.

[MrAgapiGC]

for ram sensor NOP. i send that report some time ago.