connect the rgb of the box

[fafa]

Hello,

Could you help me connect the RGB of my fans and CPU cooler from the BitFenix Nova Mesh SE TG case to the Armoury Crate application?

Here are my connections, then I connected the 3-pin output to my motherboard. What could be the problem?

 

 

 

[Seabee_2]

What Model Mother Board and I will assume it is an Asus/ROG board as you are asking about the armoury crate software to control your  fans and ARGB ? or RGB? 

Can you take a clearer picture of your fan/led hub? And turn off the flash also zoom in a little if you can. 

Also take a picture of the cable ends that you are attempting to connect to the motherboard. Thank you

[Seabee_2]

Here is the OEM for your case direct from the manufacture see page 13/ 14 in the PDF document. linked below. There is a combined cable on the hub with the printed label in white : PC / PWM / DATA this is cable that will have to go to the mother board 5v header and a fan header on the motherboard.  Again before you plug the cable in ensure that the header is the correct one as ARGB and RGB are different. As I posted on first response need mother board model to better assist.  https://www.bitfenix.com/download/02-Chassis/ATX/Nova%20Mesh%20SE/Nova%20Mesh%20SE%20TG-QIG-v1.01.pd...