Setting OLED Flicker-Free dimming to "0" makes current display profile unable to be used. Brightness wont increase unless you switch the profile.
As mentioned by @AlexNosov :
I cannot use one or more colour profiles.
I have replicated this, and the trouble seems to be the following:
When using the OLED Flicker-free Dimming section, and setting the brightness to 0, the colour profile you use, is no longer useable with an error: "Cannot connect with ArmoryCrate Service". An uninstall and re-install of Armory Crate does not fix the issue.
Tried it with the sRGB by accident, and then the Display P3 profile after (wishing I hadn't), to see if that is what caused it, and yep. Once I did that, I get the error when changing display profiles, that it cannot connect to the ArmoryCrate Service all of a sudden.
This doesn't happen with the Windows dimming to 0, so, no idea what happened.
Now, colours aren't as important to my day-to-day, however I am also a part-time photographer and now my colours are essentially nuked.
Anyone have a solution?
I have tried a full uninstall and re-install, and without messing with the brightness, I have the same problems. So it basically seems to be permanent.... Which really grinds my gears.
Specs:
ROG Zephyrus G16 2024 OLED
Ryzen AI 9 HX 370
Nvidia 4070
Win11 with latest update as of time of writing
App Ver.: 5.9.4.0
Only fix I found was to reset to ASUS factory settings (I needed something urgently as.... Well... The attached pic below is what happened)
