Early this year I built a new computer with an ASUS Z690 motherboard (PRIME Z690-P D4). One thing I wanted to take control of right away was the RGB lighting as I had RAM and fans that could be controlled. To do that I wrote a program (in C#) to use the AURA Sync library to detect and control all RGB enabled devices. It worked fine and I have a nice little program that monitors the monitor state and shuts off the lighting when the monitor turns off.
That was fine until about a week ago when I added an ASUS ROG STRIX RTX 3050 video card. Armoury Crate sees the video card just fine and can control it. However, when I use the "IAuraSdk" interface to enumerate the controllable devices, I never see the video card. Here is an example of what I'm able to detect:
Device: ENE_RGB_For_ASUS0 (DRAM) with 5 lights in 5 x 1.
Device: ENE_RGB_For_ASUS1 (DRAM) with 5 lights in 5 x 1.
Device: ENE_RGB_For_ASUS2 (DRAM) with 5 lights in 5 x 1.
Device: ENE_RGB_For_ASUS3 (DRAM) with 5 lights in 5 x 1.
Device: Mainboard_Master (Motherboards) with 1 lights in 1 x 1.
Device: AddressableStrip 1 (LED strips controlled via motherboards) with 14 lights in 14 x 1.
Device: AddressableStrip 2 (LED strips controlled via motherboards) with 14 lights in 14 x 1.
Device: AddressableStrip 3 (LED strips controlled via motherboards) with 24 lights in 24 x 1.
Device: AddressableStrip 4 (LED strips controlled via motherboards) with 24 lights in 24 x 1.
Device: AddressableStrip 5 (LED strips controlled via motherboards) with 24 lights in 24 x 1.
Device: AddressableStrip 6 (LED strips controlled via motherboards) with 24 lights in 24 x 1.
Device: AddressableStrip 7 (LED strips controlled via motherboards) with 24 lights in 24 x 1.
Does anyone have an idea as to why the library can't see the video card when Armoury Crate is able to?
