cancel
Showing results for 
Search instead for 
Did you mean: 

Armoury crate version 5.7.3.0 causing strix 4090 out sync upon reboot

idhamkassim
Level 9

HI ASUS/developer,

Need some help here. I've own ROG Strix 4090 and Maximus Z790 Hero Mobo. Recent Armoury crate update to version 5.7.3.0 causing my strix 4090 unable to sync RGB color based on preset in aura sync. Please fix or patch armoury crate. Seems annoying, everytime turn on pc strix4090 rgb out of sync. Thanks.

1,713 Views
34 REPLIES 34

nejc311
Level 7

Similar issue except it's my headset (Fusion 500) turning lights on upon every startup or restart, and I have to resync every time.

psikofunkster
Level 9

They released today an update and it was fixed i believe! 😁

Update: Nah i talk too soon things are still broken.

Update 2: 2 reboots already and rgb is fine, now do i wonder if there is a conflict between armoury crate and iCue....what a mess.

After reboot is normal to be fine , since its resync after every reboot.
It will be good to have some Asus member here invoived with news on incoming fix ?

xLowlife
Level 7

I am facing the same issue as you and everyone else with my TUF 3090. Worked fine up until around the same time this thread got created.

nejc311
Level 7

Though I had this same problem on a headset not GPU (since about the same time this thread started), after last update the problem is fixed for me, but I had to reboot even though Armoury Crate didn't say I have to.

psikofunkster
Level 9

New modules out today i think this was finally fixed. Thx Asus.

purple-dash
Level 8

Unfortunately, it remains bugged for me (RTX 4090 ROG Strix White). In my case, I switched off all lightning for GPU in Aura Sync and Device tab. On windows startup, the initial action is off as desired, but after some time it resets to a default red-blue cyberpunk shade.

Occasionally, after several reboots, the erroneous reset does not occur, but this behavior is very unstable.

Also, the uninstaller does not work even after several reboots.

 

raditz5
Level 8

I removed all of the Armory Crate software due to this issue and also because for a while Fan Expert was broken and I moved to third party apps but since I have to install a new BIOS every week from them it resets the Anime Matrix to show child faces when the PC is off and it makes the MB RGB lights stay on when powered off so I get stuck having to reinstall this buggy mess just to set those things up after ever buggy BIOS update =]. Just a minor vent.

At least they finally stopped wiping out my fan curves with every update. 

Edit: NVM todays update reset my fan curves and also demanded a PC restart. How can they have so many updates that break stuff reset settings and require reboots, what are they even doing this is by far the most annoying software on my PC.

raditz5
Level 8

Even after todays updates this issue still exists for my 4090 Strix. If I restart it keeps the RGB settings but if I shut it down over night and start it in the morning it goes back to default. Starting to wonder if they will ever fix it. Anyone else still having this?

The issue remains. We prob need to wait for the upcoming V5.7.6.0 crate update. https://rog-forum.asus.com/t5/armoury-crate/armoury-crate-v5-6-10-0-v5-6-8-0-aura-creator-v3-6-9-0-r...