Armory Crate Ryujin II 360 device loading delay issue solution.
I reported and delivered the issue several times, but it was no use.
Sometimes, the symptoms seemed to improve after updating, but the same connection delay occurred again, and the frustrating situation continued.
After several trials and errors, I will share the 100% situation that I solved, so
Please check it out if you have the same symptoms.
# Current hardware specifications of the author.
- i9 13900K/ RTX4080 OC/ DDR5 32G 6400/ Windows 10 Pro (22H2)
@ Problem symptoms
1. After updating Armoury Crate and updating the device, the Armory Crate device page
does not recognize Ryujin II 360, and even if it does, you have to wait more than 30 minutes.
2. Only the initial logo is displayed on the Ryujin II 360 LCD screen, and the temperature and other figures are not activated.
(Connection delay occurs)
@@ Solution.
- Windows Settings -> System -> Display -> "Graphics Settings" at the bottom ->
Select Armoury related app options -> Graphic default settings -> Change to "High performance".
- Content: The 13900K CPU is a processor that uses built-in graphics, but I know that it is switched to unused when using an external graphics card, RTX4080.
However, the graphic default settings of the Armoury related app mentioned above are changed to "Power saving" or "Allow Windows to decide" every time the Armoury Crate device is updated or the MS Store is updated, which is why the delay problem occurred.)
- I have been using it for more than 7 days after changing the settings to the above, and it works normally even when I changed the settings again after uninstalling and reinstalling.
- I am sharing it because I couldn't find any references no matter how much I searched for solutions in the community. I hope that you will be free from the pain of lack of awareness and delay that I have experienced.
