SAPPHIRE TriXX Utility

[osiris316]

Hey folks,

I'm running the beta Crimson Radeon Software Version 16.5.2. I read about, and had the fans speed issue where the fans would stay stuck at around 25% even though under heavy load, the temps were getting over 70*C. Not acceptable for the Tri-X Fury I have. I was up all night looking for something in the Crimsom utility I'm a noob to this new driver package been running catalyst suite for years. I was searching around and found this thread.

https://www.reddit.com/r/Amd/comments/3t79oc/sapphire_trixx_v521_is_out_amd_fury_voltage/

If you have a supported Sapphire card, the TriXX utility is a very simple and effective solution. Bare bones as it may be, it has taken my new build to a new level. The difference this utility has made in my benchmarks and gaming data results is amazing. Check it out if you didn't know about it like me. It works very well.

http://www.sapphiretech.com/catapage_tech.asp?cataid=291〈=eng

I'm new to the forum, if I have violated any posting rules regarding links I apologize, just shoot me a link for a posting guide.

Thanks,

Osiris

🙂

[maxrealliti]

hi take and completely remove the driver utility DDU into safe mode and disable the startup applications sapphire. then set to 0 and the driver download utility MSI, understand at what point you going to hang and try to adjust speed manually by the driver or utility. I am the owner of 390 and have problems with bridle
http://www.wagnardmobile.com/forums/viewtopic.php?f=5&t=245
https://gaming.msi.com/ru/features/afterburner

[osiris316]

Hi maxrealliti,

I used the DDU utility last week. I have read about the MSI afterburner as well. I'll look into this information further for a deeper understanding.

Thanks buddy,

Osiris

🙂