Ok so I can not figure out if the adapter included with the card is active or should I order another one...and which one should I order?
Since they cost around $30 I would like a recommendation before buying one.
And because I want to help others with same type of question, here is what AMD says:
Also when I find an answer (looks like maybe else where) I will post it here too.
Connectivity Requirements: AMD Eyefinity technology is supported by graphics cards in the ATI Radeon™ HD 5400 series and higher. These cards can support up to six monitors (depending on the model), subject to the following restrictions:
• A maximum of 2 legacy monitors (VGA, DVI or HDMI) can be enabled simultaneously, provided that each monitor is connected either directly or via a “passive” DisplayPort™ adapter/dongle. “Passive” adapters/dongles will NOT support more than 2 legacy monitors.
• To enable support for more than 2 monitors, “active” DisplayPort™ adapters/dongles are required (or monitors with direct DisplayPort™ connectivity must be used).
• Approved “active” adapters have no general connectivity restrictions with AMD Eyefinity technology.
i7 4930k - Rampage IV Black Edition, CORSAIR Vengeance 32GB, EVGA GTX 780 Classified Three 27" Screens, Obsidian 800D, COOLER MASTER 1000w Gold Series, Samsung 840 Pro SSD, 2x -WD 750GB 7200 RPM SATA 6.0Gb 64mb cache 2x - VelociRaptor 10000 rpm, ASUS Xonar Essence STX / Windows 7 Ultimate 64