Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

7970 Matrix Platinum triple screen issue

Noobsquad
Level 7

‎03-03-2013 03:41 PM

Hello!
My first post to this forum, so forgive me for any mistakes 🙂

I am having troubles connecting all of my three screens to my graphics card, or rather i am having trouble getting windows to show on all three screens at once. It will show on two screens at once, but not three. once i try extending or mirroring over to screen nr. 3, it tells me i have to apply to do anything more, and it won't save. it simply says "unable to save display settings".

The screens are hooked up as follows:

Screen nr 1: DVI
Screen nr 2: Displayport to HDMI cable.
Screen nr 3: DVI

Anyone know what i need to do to use all three at once?

I really feel like i am missing something really obvious:(
Labels:
0 Kudos
7,920 Views
6 REPLIES 6

lizard
Level 7

‎03-03-2013 04:52 PM

This picture will most likely resolve you problem:

0 Kudos

Noobsquad
Level 7

‎03-03-2013 04:55 PM

thank you for the help, but i have tried pushing that switch both directions. Any other ideas?
0 Kudos

oldbrave
Level 9

‎03-03-2013 08:27 PM

What sort of adapter are you using to go from Displayport to HDMI and which Displayport are you using ?
Also what resolution are you running the monitors at ?
Electronic Smoke Signals From my TechnoTeepee
ASUS Crosshair V Formula AM3+ 990FX, 1703 bios
AMD FX 8350 Vishera @ 5162Mhz [21x245] 1.546v 🙂
Water Cooled - Koolance EX2-1055, CPU 370 WB, Idle=22c Load=52c
32Gb G.Skill Sniper ddr3 1600 8G X 4 , 9-9-9-24 @ 1.55v
ASUS HD7970-DC2T-3GD5, Cat 13.5 beta 2, Dell U3011 @ 2560x1600
SanDisk Extreme 120Gb SSD SATA 6Gb, 250Gb SATA 6Gb, 1Tb SATA 6Gb x2
Win 7 Ultimate 64bit, Corsair Obsidian 800D, Corsair HX1000w PSU
0 Kudos

Noobsquad
Level 7

‎03-04-2013 05:17 AM

There is no adapter, just the cable that has DP in one end, and HDMI in the other. All monitors are running at 1920 x 1200 resolution.
0 Kudos

Granger
Level 10

‎03-05-2013 01:53 PM

You need an active display port adapter, your cable is a passive.

I'm using this one

0 Kudos

r3zn0r
Level 7

‎03-05-2013 05:21 PM

Noobsquad wrote:
Hello!
My first post to this forum, so forgive me for any mistakes 🙂

I am having troubles connecting all of my three screens to my graphics card, or rather i am having trouble getting windows to show on all three screens at once. It will show on two screens at once, but not three. once i try extending or mirroring over to screen nr. 3, it tells me i have to apply to do anything more, and it won't save. it simply says "unable to save display settings".

The screens are hooked up as follows:

Screen nr 1: DVI
Screen nr 2: Displayport to HDMI cable.
Screen nr 3: DVI

Anyone know what i need to do to use all three at once?

I really feel like i am missing something really obvious:(


i have the unable to save message sometimes and i just apply it again straight after i ok the error and it works. may work for you also
0 Kudos