cancel
Showing results for 
Search instead for 
Did you mean: 

PRIME X870-P WIFI Multilink Operation(MLO) not working

jlmcr87
Level 9

Hello, I have a PRIME X870-P WIFI and a Huawei BE3 global router with wifi 7. I have problems because i can´t get MLO working. 

In the connection properties i can see:

802.11be. WPA3-Personal. MediaTek Wi-Fi 7 MT7925 Wireless LAN Card with the latest drivers 5.4.0.2611

I have the MLO option enabled in the router. But i can only see one band in the connection properties on windows 11 24H2: 5 GHz (36)

This motherboard is announced as MLO capable. Please help. ThanksCaptura de pantalla 2024-12-15 123053.png Captura de pantalla 2024-12-15 122957.png

 

309 Views
5 REPLIES 5

Katana1074
Level 11

Hi....

As per your screenshots, I would say your connection is perfectly fine, even if mlo is not functioning

The Specs for your router are:

Wi-Fi Standards

IEEE 802.11a/n/ac/ax/be 

IEEE 802.11b/g/n/ax/be

2 × 2, MIMO

Wireless Rate

Wi-Fi 7 2 × 2

2.4 GHz: 688 Mbps (theoretical)

5 GHz: 2882 Mbps (theoretical)

Total theoretical negotiated rate: 3570 Mbps

Wi-Fi 6 2 × 2

2.4 GHz: 574 Mbps (theoretical)

5 GHz: 2402 Mbps (theoretical)

Total theoretical negotiated rate: 2976 Mbps

Wireless Band

2.4 GHz & 5 GHz (support dual band integration configuration)

you are connected at the theoretical maximum for your router 2882Mbps..

Regards

No. As i can see in the router website the total speed for wifi 7 is:

Total theoretical negotiated rate: 3570 Mbps

Because MLO agregates the two bands.

Katana1074
Level 11

Then you only have two options,

1.Update the router firmware to the latest...

2. roll back the mediatek driver to version 5.4.0.2566 WHQL

are you using windows 10 ?

The router is updated.

5.4.0.2566 WHQL also not working and older than the version i have updated today.

Today I have updated the mediatek drivers to the version in the photo and MLO is now working.

Captura de pantalla 2024-12-21 140209.png