cancel
Showing results for 
Search instead for 
Did you mean: 

Power Up /Boot Up

bote110
Level 9

My system is 3 months old , Motherboard is a Asus ROG Strix x870e and PSU is a beQuite 13 Pro 1600W .  When I hit power button on my Crosshair 5000 case it does nothing some times when I put it to sleep no Boot only happens every now an then . Power Supply is connected to a power strip .  I unplug the power and wait till all lights are gone and plug it back and boots up just find the last Q code was 00 when it didn't boot . I unplug it from the power strip just now just in case the power strip was not strong enough for 1600w I plug direct to the outlet  and see if that's what it was.    Any other thing to look at . 

468 Views
5 REPLIES 5

bote110
Level 9

I connected the power cord to the outlet {Before my system I switch my outlet to a 15a Commercial outlet} and today I hit my power button and no boot ??? Q code on my motherboard 00 .  I unplug it , waited and re plug and started up normal ???  

Check your switch. I just had to replace one but it's a 23 year old Aluminum Black Lian-Li. Your motherboard has a  switch on it for START. You have to open the case. Consult your manual. Good Luck.

So far I reduce from Fast Boot down to the next level and it's been Booting fine even at sleep mode.

 

 

I have a Rog Strix x870e motherboard with Kingston Fury Beast 32 GB 

memory , beQuit Pro 1600w with a Crosair 5000D rgb case and a AM5 8600G CPU 

I have to set it to get a few more seconds.