12-12-2025 12:32 PM
Need help with a new PC build - first attempt after putting everything together, it won't POST.
PC Parts:
Error message & behavior:
Steps taken so far to troubleshoot:
1. Check all cabling both on motherboard and PSU.
2. Re-seated CPU and AlO.
3. Checked each RAM module one at a time in A2 slot.
4. Clear CMOS using a button on the back panel.
5. Bios Flashback to the latest version. I'm running out of ideas at this point.
Any suggestions/help is appreciated. Thank you!!
12-12-2025 10:51 PM - edited 12-12-2025 10:52 PM
Hi @wolfpack84
If the system is still displaying 00, first ensure that the 24-pin and 8-pin ESP connectors are fully inserted on both the motherboard and PSU sides.
If no change, remove the CPU once more and inspect the socket fully for an debris or damage (inc bent pins). Then do the same for the CPU pin-pad.
If no change, the culprit is unfortunately likely to be either a defective CPU or motherboard.
a month ago - last edited a month ago
Update: Ended up taking to a Micro Center and they confirmed what I suspected. Motherboard was dead.
I appreciate your help!