I built a desktop with an AMD 9800x3d and a Proart 870e using Windows 11 pro(64), It's about 3 months old. When I wake the system from sleep, both wired ports (2.5 and 10) stop working, and I have to disable then re-enable them in the device manager. If I boot from powered off, they work. I tried updating drivers, updating the bios, changing the cat 6 cables, etc. I have checked the cables and the ports on the switch with other devices like my laptop and secondary PC, and everything else works. I have tried switching to a different port on the switch and the problem still occurs. the cat6e cable is only 6 feet long, and an identical cable is hooked to my NAS which is running at 2.5 and works perfectly. I am stuck at this point. I can't be without my system, so I am about to install a pcie nic so I can get off the wifi network (which works fine). I have the wifi turned off as normal so it shouldn't be interfering.
I am kind of stuck and frustrated considering how much this board cost. Does anyone have a suggestion?
