cancel
Showing results for 
Search instead for 
Did you mean: 

X670E plus wifi Ram only running 4800 only

shredding_J
Level 7

Hi,

So I just build this PC, checked BIOS and saw ram running on FW 2613 at 4800. Enabled DOCP --> 6400--> no boot. Ok, bios reset and ---> 6200 ---> same. Ok back to default 4800. Now I just flashed bios to 3020. Should I try again 6400 or aim lower? I just don't want to open the PC again, unplug all crap etc. Just would like to hear if the new firmware fixed issues? (GPU= Radeon 6750xt)

shredding_J_0-1727601633093.png

 

591 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Silent_Scone
Super Moderator

Hi @shredding_J 

1. Please check to see if the memory kit part number is present on the Motherboard's Memory QVL.

2. Test EXPO II (Default DIMM profile with relaxed sub timings).

3. Manually set DRAM Frequency to 6000MT and retest.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

View solution in original post

4 REPLIES 4

Silent_Scone
Super Moderator

Hi @shredding_J 

1. Please check to see if the memory kit part number is present on the Motherboard's Memory QVL.

2. Test EXPO II (Default DIMM profile with relaxed sub timings).

3. Manually set DRAM Frequency to 6000MT and retest.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Hi, 
I found it on the site (mine is black CMP32GX5M2B6400C32 but I guess that doesn't matter).
CORSAIR CMP32GX5M2B6400C32W Ver 5.43.01 2x 16GB XMP 6400 6400 SS SK Hynix 32-40-40-84 1.4 1,2

I'll check that out thanks.

Just set it to DOCP II 6000 mhz. System seems to be running fine, going to do some gaming testing and update.

Thanks in advance!!

shredding_J
Level 7

Solved, thank you very much ;-)!!