X670E plus wifi Ram only running 4800 only

[shredding_J]

Hi,

So I just build this PC, checked BIOS and saw ram running on FW 2613 at 4800. Enabled DOCP --> 6400--> no boot. Ok, bios reset and ---> 6200 ---> same. Ok back to default 4800. Now I just flashed bios to 3020. Should I try again 6400 or aim lower? I just don't want to open the PC again, unplug all crap etc. Just would like to hear if the new firmware fixed issues? (GPU= Radeon 6750xt)

[Silent_Scone · Accepted solution]

Hi @shredding_J 

1. Please check to see if the memory kit part number is present on the Motherboard's Memory QVL.

2. Test EXPO II (Default DIMM profile with relaxed sub timings).

3. Manually set DRAM Frequency to 6000MT and retest.

[shredding_J]

Hi, 
I found it on the site (mine is black CMP32GX5M2B6400C32 but I guess that doesn't matter).
CORSAIR CMP32GX5M2B6400C32W Ver 5.43.01 2x 16GB XMP 6400 6400 SS SK Hynix 32-40-40-84 1.4 1,2

I'll check that out thanks.

[shredding_J]

Just set it to DOCP II 6000 mhz. System seems to be running fine, going to do some gaming testing and update.

Thanks in advance!!

[shredding_J]

Solved, thank you very much ;-)!!