10-28-2022
03:02 PM
- last edited on
03-05-2024
01:59 AM
by
ROGBot
10-28-2022 11:43 PM
10-29-2022 01:55 AM
Anthony Kinson wrote:Â*I
we have a similar build bar the memory, I was experiencing BSOD constantly too at first out of the box, specifically with MEMORY_MANAGER, and occasionally another error. they went away completely after updating the BIOs to 0705
10-29-2022 07:41 AM
Jagguw wrote:
Â*I
Â* have the latest update since the 10th of October which is when it came out, would updating the bios again maybe fix my issueÂ*
10-29-2022 01:37 PM
Qwinn wrote:
To the same version? Probably not. But if I were in your situation, I would try out the beta bioses posted on the sticky thread in this forum ("X670 Resources").
Out of curiosity, you said unplugging USB stuff got you past the 'B4' - are you running fine without USB devices plugged in? Or still crashing anyway?
11-01-2022 04:00 PM
Jagguw wrote:
So I found out on reddit that a lot of people are getting BSOD with the 7950x and turns out it is because it is faulty so I am getting it replaced. it
But I don't know if it will fix my bios problem for B4 which the only way I can boot my PC is without usb's plugged in and yes I do still get blue screens so I may get my motherboard replaced too which is a hassle.
11-01-2022 08:43 PM
Primedius wrote:
I have an asus crosshair extreme x670e. It runs rock solid with the 7950x as loneag as my memory is at 4800 mhz. I had some gskill expo but every time I try to run it at 6000, it will run for a bit, then start stuttering and crash. I found out my memory is not on the QVL for my board, so I found some that was (Kingston Fury Beast 6000) and tried that. Runs great at 4800, but again problems at 6000.
I tried a memory stress test on Aida64. At 4800 no problems. At 6000 it gives a hardware failure.
I'm running on bios 0705
Any thoughts?
11-02-2022 01:58 AM
Primedius wrote:
I have an asus crosshair extreme x670e. It runs rock solid with the 7950x as loneag as my memory is at 4800 mhz. I had some gskill expo but every time I try to run it at 6000, it will run for a bit, then start stuttering and crash. I found out my memory is not on the QVL for my board, so I found some that was (Kingston Fury Beast 6000) and tried that. Runs great at 4800, but again problems at 6000.
I tried a memory stress test on Aida64. At 4800 no problems. At 6000 it gives a hardware failure.
I'm running on bios 0705
Any thoughts?
11-12-2022 10:25 AM