x670e-e gaming wifi 9800x3d issues

[chapsui]

Hi all, was wondering if anyone was having issues upgrading from a 7800x3d to 9800x3d. Updated to latest 2506 bios prior to install and swapped out the CPUs, and installed the latest AMD chipset. The 9800x3d seems to be working at stock, but once I enable expo 1 OC settings, it goes completely unstable, games crashing at launch, blue screens galore. Think it has to do with RAM, but I had a completely stable system with the 7800x3d. My ram is the G.skill trident F5-6000J3038F16GX2-TZ5NR, and it's definitely been on the support memory list for quite some time.

Anyone with similar issues?

 

[BoostedSTIG]

X670E-F board. I had issues with BIOS 2506. The official support list has 2403 from September listed as the first BIOS that supports 9800X3D so I went back to that and it seems to be working fine. PBO+200 is working and I've got a 6000CL30 kit turned up to 6200CL28 running and stable with no issues.

[Silent_Scone]

Can those with EXPO difficulties on 9800x3d that haven’t already, please state which board, memory kit part number and UEFI revision clearly? 
@BoostedSTIG @Jakyrian_ @chapsui  @OnceCaringSoul are you able to try the beta?

https://rog-forum.asus.com/t5/amd-600-series/x670-resource/m-p/1056973/highlight/true#M7836

Thanks

[Abandonation]

I have TUF X670E-PLUS, 9800X3D is not working. Yellow DRAM QLED is not turning off. Waiting 2 minutes, then shutting down.

Here is the list what I've tried:

1. Updated BIOS to 3057.
2. Cleared CMOS with replacing MB Battery.
3. Cleared CMOS with pins
4. Changed RAM slots
5. Changed 2 RAMs to 1 RAM, tried various slots
6. Downgraded BIOS to 3024
7. Tried the things above
8. Upgraded to BIOS 3057 again cuz it didn't work

After everything I've tried, it didn't work. When I changed to 7700X, it worked perfectly.

My RAM Kit : GSKILL F5-6000J3038F16GX2-TZ5NR G.SKILL Trident Z5 Neo RGB Dual DDR5-6000Mhz 32GB (2x16GB) C30 (30-38-38-96) 1.35V (AMD EXPO)

[Silent_Scone]

Have you tried the beta in the resource thread? (see my previous post)

[Abandonation]

I already sent the CPU for RMA, if it returns, I'll try it and post the result here.

Thanks for replying.

[Timburbala]

Hi,

what was the outcome of the RMA (if it is already finished)?
Would be nice if you can share the result.

Thank you!

[Silent_Scone]

Tried the beta?

[Abandonation]

Still in RMA as I said.

[OnceCaringSoul]

The beta bios does seem to be working. I was able to boot into windows with expo enabled after about 10 min of sitting.  I figured it would take a few min.   i've rebooted a few times, played some games, seems stable at the moment.  Thanks for the help! 

[Silent_Scone]

Nice, good to hear. 

And yes, people tend to forget how long initial training takes on AM5 if they've been used to having it previously retained using MCR