cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

569,935 Views
2,380 REPLIES 2,380

DNABrooker
Level 8

Ok i tried HWInfo is showing me every Cores was reaching 5150 Mhz, but in Games its even worse it only reaches Max 5000Mhz.

Do you reach 5200Mhz in Game?

With PBO Enabled and CO i reach 5050Mhz in Games like its showing in HWInfo 5050Mhz on every Core.

I checked. Occasionally it goes above 5050mhz. Usually around 4900mhz.

ja-ki
Level 7

Hey guys, I think there is a bug in the current BIOS. I don't get a reading of my thermal sensor connected to the thermal sensor pins of the X670e Proart. They just don't work.

74lobster
Level 10

I see that bios 1101 is no more BETA...

https://rog.asus.com/us/motherboards/rog-crosshair/rog-crosshair-x670e-hero-model/helpdesk_bios/

Is the same bios or is a new one?

Thanks in advance.

74lobster

2.pngwith 1101 and 1004 my GPU Sensors dissapear and im not able to run the 4090 on PCIE 16x4.0 not matter what, it stays at 16x1.1. In Timespy i have between 3 and 5 fps ..............

Im not able to launch HWinfo Sensorpanel
I downloaded not the 1101 BETA, i downloaded the recent relased one........................come on.........

X670e-e, 7900x, 2x16 DDR 6000 G.Skill QVL (D.O.C.P I II Tweaked offno differnce)

Anyone else have this issue?

 

happens here from time to time as well with this bios version... what you can try is set under onboard devices the pcie version to 4 for the x16 port

Tank you, first time i saw this, i was afraid my gpu is broken

changing in BIOS to force 4.0 did not work - i also tried alteration mode to 4.0 - with 1004, 1101 im not able to get run my 4090 - i cant change speed to 4.0 and i get no sensor data (see screenshot above)

With 0805 no issues

 

Goose3080
Level 9

After coming from a Gigabyte x570S motherboard im finding this ASUS board and bios very confusing, the one thing thats worrying me is the SoC voltage is at 1.35v ???? is this normal, anything above 1.2v on my X570 and I would of fried the chip

Specs are an ASUS X670E gene motherboard (its the only x670 board I liked), a Ryzen 7900 non X and 32gb (2x16gb) G.Skill Trident Z5 CL32 F5-6000J3238F16GX2-TZ5NR

freakazoid
Level 10

is there a changelog for the 1101?

what exactly has been changed?