cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

573,316 Views
2,382 REPLIES 2,382

Thank you much 😉

roupa_de_trapo
Level 10

DeepCool Assassin III cooler

RUN YCRUNCHER DDR5 6000MHzRUN YCRUNCHER DDR5 6000MHzFINAL DDR5 6000MHzFINAL DDR5 6000MHz

fEaRz
Level 8

2006 is stable with the SN850X in M2_1. Comparing the 1905 with the 2006 I had to increase the voltages by 0.03 of VDDQ and MC CPU VDDIO and now my memories are stable again.

Xyd3r
Level 7

2611 on X670E-I --> Q-Fan --> duty-cycle in DC-mode can be set not lower than 60% wich makes Manual-Mode almost useless.

roupa_de_trapo
Level 10

DeepCool Assassin III cooler. PBO 170 W.

Blender v3.1.2 PBO 170 WattsBlender v3.1.2 PBO 170 WattsCinebench R23 PBO 170 WATTSCinebench R23 PBO 170 WATTS

Can anyone explain how to adjust these new configuration possibilities that have appeared? We have, for example, several impedance options available.

POWER LIMIT FAST SLOW PPTPOWER LIMIT FAST SLOW PPTDDR BUS CONFIGURATIONDDR BUS CONFIGURATIONDDR TURNAROUND TIMESDDR TURNAROUND TIMES

Goose3080
Level 9

How can I back flash to 1905 on my Gene ?, when I put the bios on a USB stick and enter the bios to start easy flash, it says this is not a valid bios file ?

This has bios has changed my RAM overclock on a Ryzen 7000 series chip and im no longer stable at 6400mhz, ive had to dial back to 6200mhz, where previously its been stable though all the bioses.

SAFEDISK
Level 10

ROG-Strix-B650-A-Gaming-WIFI_15.jpg

ROG CROSSHAIR X670E/STRIX X670E/B650 Series Beta Bios 2007/2613

1) Fix WD SN850/SN850X M.2 device can't detect issue

dont use older cmo file

ROG CROSSHAIR X670E HERO BETA BIOS 2007
https://drive.google.com/file/d/1ClAgs9G_k-UDXhNRuU2Aylvv4SMfztO_/view?usp=sharing

ROG CROSSHAIR X670E GENE BETA BIOS 2007
https://drive.google.com/file/d/1qaTmPbhfaIe91wj-MiaBOHbWC296ZJ4X/view?usp=sharing

ROG CROSSHAIR X670E EXTREME BETA BIOS 2007
https://drive.google.com/file/d/10l7ZqIVLFlJ6GsIxK3c-AgD-idGNnzHR/view?usp=sharing


ROG STRIX X670E-A GAMING WIFI BETA BIOS 2007
https://drive.google.com/file/d/1oP7u3E9jrMnLtqWy4ViTfnPSSA-rxYgd/view?usp=sharing

ROG STRIX X670E-E GAMING WIFI BETA BIOS 2007
https://drive.google.com/file/d/1Z6Rbd84Ok1sE77n8ohqWN1J1TDPdUQLh/view?usp=sharing

ROG STRIX X670E-F GAMING WIFI BETA BIOS 2007
https://drive.google.com/file/d/1HAV39oDknmRyp7p1QCw_LgLKaWKluclY/view?usp=sharing

ROG STRIX X670E-I GAMING WIFI BETA BIOS 2613
https://drive.google.com/file/d/1HokdlrXTs2QZV9Zy1Jysm6KOhhA3N9oP/view?usp=sharing


PROART X670E CREATOR WIFI BETA BIOS 2007
https://drive.google.com/file/d/17A9lkejUT3M2cF5tG1YE1vglwLY_ryCa/view?usp=sharing


ROG STRIX B650-A GAMING WIFI Beta Bios 2613
https://drive.google.com/file/d/1kWI1Hzp3p6YBBgB9e6Kv3nA_4miuFe7L/view?usp=sharing

ROG STRIX B650E-E GAMING WIFI Beta Bios 2613
https://drive.google.com/file/d/16xdDHxvXrOKNDwWVWDowOPitdXGFoq8Z/view?usp=sharing

ROG STRIX B650E-F GAMING WIFI Beta Bios 2613
https://drive.google.com/file/d/1WWfmXcMWjcMO1OInR14yJz9Pulj7U3Vg/view?usp=sharing

ROG STRIX B650E-I GAMING WIFI Beta Bios 2613
https://drive.google.com/file/d/1teOzPzRaFRrrOsgLn0Sum689TgMPSQWY/view?usp=sharing


PROART B650-CREATOR Beta Bios 2007
https://drive.google.com/file/d/1Pi96j18p_Y1M0upm9rM9UGDUPSI0eB7D/view?usp=sharing

Thanks for posting these.  
For some reason, Asus has removed all bioses and drivers from both their US and international websites for the Strix E-E board!  I hope this is a temporary glitch!
"We don’t currently provide a software utility or drivers for this model"

Just keep refreshing the page, and they will show up, I was experiencing the same problem this morning for my Gene board