cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

640,240 Views
2,438 REPLIES 2,438

What problems did you have exactly? By any chance a black screen with spinning fans?

Silent83
Level 8

I use Bios 2007 (tweaked Expo) from the release with X670E-F and 7800X3D.

Everything works perfectly!
I'm uncertain about the duration! 🙂

Hi, can I ask You Your settings? Same conf for me apart the model that is X670E-E
I have a BIOS boot time of about 30 sec before it start booting and also I suspect the CPU didn't work well at the moment (I have the same performance that I had with the 5800X3d and the X570E-E
You use any kind of PBO/Curve optimizer? If yes You use the automatic PBO profile or Youset it manually? And if manually what I need to set?
Ah, I forget to say that my ram are G.Skill Trident Z5 Neo RGB F5-6000J3040G32GX2-TZ5NR memory module 64 GB 2 x 32 GB DDR5 6000 MHz
Sorry but really noob with AMD CPU 🙂
Thx.

 

Hello

I have said some months ago that all the rear USB 3.2 port don't work with SAMSUNG 256 go USB3.2 gen1

MUF-256DA/APC and have suspected about something wrong on the BIOS or USB drivers.

This afternoon, I have fitted the USB key strongly (verry, verry) on the 4 rear USB 3.2 port and surprisingly this time its working !!

Thats good but where is the problem you can ask ?

Simply because the ASUS backplate isn't completely flat that mean if I put the USB key on the 4 USB 3.2 rear port of the motherboard and keep strongly my finger on the usb key, the key is recognized but if I remove my finger, the key isn't recognized anymore. ASUS backplate need a screw at the middle !!!!!

The backplate seemed to be well placed on the opening but maybe need a little more place on the upper and lower

opening of the corsair tower 4000D to be completely flat ?!?IMG_0074.JPG

 

A report not related to BIOS but could be usefull to other users that mean also choose carelully the USB 3.2 you could buy.

WagxCWB
Level 9

Following up to try to make the 7950X3D + Gskill 6000MHz stop the BLUE SCREEN

frenzyff
Level 10

No issues here with an 7950X3D and Gskill 6000 2x32 on 670E-Extreme.
Maybe a defect somewhere?

Hlidskjalf
Level 8

There is a typo, or typing error in one of the UEFI settings called "CPU more speculative modes". It says "Blanced" when it should be "Balanced". Seen in Asus ROG STRIX X670E-A @ BIOS version 2007. Probably same error in other motherboards as well?

You should be more worried about Asus boards killing themselves (like the Gene) than a typo. 🙂

What about Gene? 🙂

Any context for this statement or are you just bored? 😅

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090