cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

1,124 Views
2,454 REPLIES 2,454

I need to put the 16_1 lane on Auto in BIOS.

If I put it x4, I only get 16x 3.0. 😕

Untitled.jpg

ksenchy
Level 11

Hey guys, is there any BIOS fix for mic audio leakage that is apparently there on Asus boards since x470 generation? Namely the microphone volume is extremely low and the volume slider does nothing on x670E-F both with official drivers and the unofficial from driver thread on this forum.

Zheega
Level 9

Try the "Audio ALC4080 FW update tool" under BIOS & Firmware download section.

 

I have the latest FW installed. Maybe Asus or Realtek need to release another one 😕

iamgarffi
Level 11

Looks like 1806 did not fix issues with vanishing NVMEs. Cold boot after the night and only GenZ is showing up. Hard power cycle and on second boot everything is fine.

 

X670E Extreme @1806.IMG_4193.jpg

7950X3D — Gene X670E — 2x32GB 6200MT/s CL 32 Corsair Dominator Titanium 64GB kit — MBA 7900XTX — Aorus FO32U2P QD-OLED — 2x4T 990 Pro NVMe — Corsair Link (AIO+Fans) — Corsair 2500X Case — Asus ROG Loki 1000W PSU

This version is still under validation and the issue is still under investigation by AMD, hence beta. When the issue has been resolved will be sure to mention here.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

@iamgarffi I havent had any issues with NVMEs going away.
My main drive is a Samsung 990 Pro, my second drive is an Intel drive.

I do have the X670E-Gene, so sliughtly different board than yours.

Teslatic
Level 9

Anyone else having issues rolling back from this BETA BIOS to the latest official release? I keep getting "Update Failed!" when I try to roll back to 1710 (ProArt X670E). 

Just tried to completely power down the system (even unplugged everything) to see if that would help, but no luck. 

Teslatic
Level 9

UPDATE: Managed to get back onto production version (1710 in my case) via BIOS Flashback. But yeah, there seems to be a problem with rolling-back from the current BETA BIOS that might need to be looked at.