cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

1,274 Views
2,100 REPLIES 2,100

iamgarffi
Level 10

Was anyone able to up the thermal ceiling for X3D processors on 1415? I am unable to post if I choose thermal limit in bios at 90 degrees - get QCode A9. 

Boots fine with limit of 80 degrees. 

Screenshot 2023-06-01 081605.png

89°C Max
I think the burning 12VHPWR Cables, "exploding" Ryzen 7000 CPUS are not always the manufacturers fault.  I think there is a lot Error 30 involved like in your case 🙂

F1Aussie
Level 11

I was just looking for the 1415 bios for my mobo and there isn't one for it, there is 1416 for the x670e - egaming. Does anyone know if that is equivalent to 1415? 

Shamino
Moderator

Updated first thread with link to octool port to linux

iamgarffi
Level 10

1415 - not looking the greatest. BIOS messed up even after CMOS reset, battery pull or flash back 🙂

IMG_2391.jpeg

I have today same issue, and this is ram issue, downclock it or use XMP/EXPO profile. Before it reset bios by jumper or with battery.

F1Aussie
Level 11

1416 for me won't save the stealth mode lighting setting in the bios when my pc is turned off, the mobo lighting itself stays on, other peripherals turn off. 

ReilArt
Level 7

Hi, I use my pc for graphic  tasks but I also love small form factors and I was thinking of going with a X670 Gene. I considered that 3 NVME and 1 PCI are enough for me. Does anyone here know if the Gene has some weird problems?

72CZR
Level 10

@Shamino is there any chance you/someone could introduce an on/off switch for the HD_LED (not the one from F_PANEL but the one described in the user manual as Storage Device Activity LED) on X670E Extreme? It's very annoying in a dark place/situation.

AMD Ryzen 9 7950X3D | ROG Crosshair X670E Extreme [1904] | Sapphire Nitro+ Radeon RX 7900 XTX Vapor-X | G.Skill F5-6000J3040G32GX2-TZ5NR | 2TB Samsung 990 PRO | 2TB Samsung 980 PRO | 2TB Samsung 970 EVO Plus | Samsung Odyssey Neo G9 | ROG RYUJIN III 360 ARGB | ROG Thor 1200P | ROG Chakram X | ROG Strix Flare II | ROG Theta 7.1 | ROG Cetra True Wireless | ROG Balteus Qi | ROG Eye S | ROG Aura Terminal | ROG Throne | ROG Spotlight | ROG Strix Arion | Windows 11 Pro