cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

1,730 Views
2,066 REPLIES 2,066

DNABrooker
Level 8

Did you check for Whea loggers? 

Whats your whole settings?

 

Did you Enable Expo and PBO ?

Yep, no errors:

Single core boosts:

ftln46_0-1682882545055.png

 

All core boosts gives me 4.9ghz

[2023/04/30 16:05:17]
Ai Overclock Tuner [DOCP I]
DOCP [DDR5-7600 36-46-46-121-1.40V-1.40V]
eCLK Mode [Auto]
BCLK1 Frequency [100.0000]
Memory Frequency [DDR5-6000MHz]
FCLK Frequency [Auto]
Core Performance Boost [Auto]
Tcl [36]
Trcd [46]
Trp [46]
Tras [30]
Trc [68]
Twr [48]
Refresh Interval [50000]
Trfc1 [500]
Trfc2 [400]
Trfcsb [300]
Trtp [12]
TrrdL [8]
TrrdS [4]
Tfaw [20]
TwtrL [16]
TwtrS [6]
TrdrdScl [4]
TrdrdSc [1]
TrdrdSd [Auto]
Trdrddd [Auto]
TwrwrScl [4]
TwrwrSc [1]
TwrwrSd [Auto]
TwrwrDd [Auto]
Twrrd [2]
Trdwr [16]
IBUF_LPWR_MODE [Auto]
ADDR_CMD_MODE [Auto]
M_ORDERING [Auto]
S_COL_WIDTH [Auto]
MC_SVA_TRIM0 [Auto]
MC_SVA_TRIM1 [Auto]
MC_SVA_TRIM2 [Auto]
Proc CA Drive Strength [Auto]
Proc Data Drive Strength [Auto]
CPU On-Die Termination [Auto]
DRAM Data Drive Strength [Auto]
Rtt Nom Wr [Auto]
Rtt Nom Rd [Auto]
Rtt Wr [Auto]
Rtt Park [Auto]
Rtt Park Dqs [Auto]
Power Down Enable [Disabled]
Memory Context Restore [Auto]
UCLK DIV1 MODE [UCLK=MEMCLK]
Bank Swap Mode [Auto]
Mem Over Clock Fail Count [Auto]
Medium Load Boostit [Auto]
Precision Boost Overdrive [Auto]
Precision Boost Overdrive Scalar [Auto]
CPU Boost Clock Override [Auto]
Per-Core Boost Clock Limit [Auto]
Platform Thermal Throttle Limit [Auto]
Curve Optimizer [Per Core]
Core 0 Curve Optimizer Sign [Negative]
Core 0 Curve Optimizer Magnitude [42]
Core 1 Curve Optimizer Sign [Negative]
Core 1 Curve Optimizer Magnitude [42]
Core 2 Curve Optimizer Sign [Negative]
Core 2 Curve Optimizer Magnitude [36]
Core 3 Curve Optimizer Sign [Negative]
Core 3 Curve Optimizer Magnitude [36]
Core 4 Curve Optimizer Sign [Negative]
Core 4 Curve Optimizer Magnitude [32]
Core 5 Curve Optimizer Sign [Negative]
Core 5 Curve Optimizer Magnitude [36]
Core 6 Curve Optimizer Sign [Negative]
Core 6 Curve Optimizer Magnitude [38]
Core 7 Curve Optimizer Sign [Negative]
Core 7 Curve Optimizer Magnitude [38]
Core 8 Curve Optimizer Sign [Negative]
Core 8 Curve Optimizer Magnitude [12]
Core 9 Curve Optimizer Sign [Negative]
Core 9 Curve Optimizer Magnitude [8]
Core 10 Curve Optimizer Sign [Negative]
Core 10 Curve Optimizer Magnitude [12]
Core 11 Curve Optimizer Sign [Negative]
Core 11 Curve Optimizer Magnitude [6]
Core 12 Curve Optimizer Sign [Negative]
Core 12 Curve Optimizer Magnitude [12]
Core 13 Curve Optimizer Sign [Negative]
Core 13 Curve Optimizer Magnitude [8]
Core 14 Curve Optimizer Sign [Negative]
Core 14 Curve Optimizer Magnitude [26]
Core 15 Curve Optimizer Sign [Negative]
Core 15 Curve Optimizer Magnitude [18]
GFX Curve Optimizer [Auto]
VRM Initialization Check [Enabled]
CPU Load-line Calibration [Auto]
Segment2 Loadline [Auto]
CPU Current Capability [Auto]
CPU Current Reporting Scale [Auto]
Core Voltage Suspension [Auto]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Current Reporting Scale [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Power Phase Control [Auto]
DRAM Current Capability [Auto]
DRAM Switching Frequency [Auto]
DRAM Power Phase Control [Extreme]
MISC Switching Frequency [Auto]
Performance Bias [Auto]
Clock Spread Spectrum [Auto]
Runtime BCLK OC [Auto]
BCLK1 Amplitude [Auto]
BCLK1 Slew Rate [Auto]
1.8V PLL Voltage [Auto]
1.8V Standby Voltage [Auto]
Misc_ALW [Auto]
Chipset0 VDD Voltage [Auto]
Chipset1 VDD Voltage [Auto]
CPU 3.3V [Auto]
DDR_testA [Auto]
DDR_testB [Auto]
SMU_Comp1 [Auto]
SMU_Comp2 [Auto]
SMU_Comp3 [Auto]
R1 [Auto]
R2 [Auto]
R3 [Auto]
Sense MI Skew 1 [Auto]
Sense MI Skew 1 [Auto]
Sense MI Skew 2 [Auto]
Sense MI Skew 2 [Auto]
Sense MI Skew 3 [Auto]
Sense MI Skew 3 [Auto]
Sense MI Skew 4 [Auto]
Sense MI Skew 4 [Auto]
Raise RComp [Auto]
Dummy VOutA [Auto]
Dummy VOutB [Auto]
Algorithm 1 [Auto]
Algorithm 2 [Auto]
Algorithm 3 [Auto]
CCD Priority Memory Activity Threshold [1070]
CCD Priority Hysteresis [Auto]
Cooler Efficiency Customize [Keep Training]
Cooler Re-evaluation Algorithm [Normal]
Optimism Scale [100]
CPU SOC Voltage [Manual Mode]
- VDDSOC Voltage Override [1.25000]
CPU VDDIO / MC Voltage [Manual Mode]
- VDDIO Override [1.35330]
Misc Voltage [Auto]
VDDP Voltage [Auto]
High DRAM Voltage Mode [Auto]
DRAM VDD Voltage [1.30000]
DRAM VDDQ Voltage [1.30000]
PMIC Force Continuous Current Mode [Auto]
PMIC Voltages [Sync All PMICs]
SPD HUB VLDO (1.8V) [Auto]
SPD HUB VDDIO (1.0V) [Auto]
Memory VDD Voltage [1.30000]
Memory VDDQ Voltage [1.30000]
Memory VPP Voltage [Auto]
Memory Voltage Switching Frequency [Auto]
Memory Current Capability [Auto]
Security Device Support [Enable]
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
Disable Block Sid [Disabled]
Firmware TPM switch [Enable Firmware TPM]
Erase fTPM NV for factory reset [Enabled]
Password protection of Runtime Variables [Enable]
PSS Support [Enabled]
NX Mode [Enabled]
SVM Mode [Enabled]
Resize BAR Support [Enabled]
SR-IOV Support [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
OWC TB3 SD Card Reader 1616 [Auto]
OWC TB3 SD Card Reader 1616 [Auto]
USB3.0 FLASH DRIVE PMAP [Auto]
USB3.0 FLASH DRIVE PMAP [Auto]
U32G2_3 [Enabled]
U32G2_4 [Enabled]
U32G2X2_C6 [Enabled]
USB_P8 [Enabled]
USB_P9 [Enabled]
U32G1_10 [Enabled]
U32G1_11 [Enabled]
USB16 [Enabled]
USB17 [Enabled]
U32G2_C18 [Enabled]
LAN_U32G2_19 [Enabled]
U32G2_20 [Enabled]
U32G2_21 [Enabled]
KBMS_USB22 [Enabled]
KBMS_USB23 [Enabled]
Network Stack [Disabled]
Device [N/A]
SATA Controller(s) [Disabled]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Restore AC Power Loss [Power Off]
ErP Ready [Disabled]
Max Power Saving [Disabled]
Power On By PCI-E [Disabled]
Power On By RTC [Disabled]
CPU PCIE ASPM Mode Control [Auto]
PCIEX16_1 Bandwidth Bifurcation Configuration [Auto Mode]
USB Audio Controller [Enabled]
Wi-Fi Controller [Disabled]
Bluetooth Controller [Enabled]
When system is in working state [All On]
Q-Code LED Function [Auto]
When system is in sleep, hibernate or soft off states [All On]
Intel LAN Controller [Disabled]
USB power delivery in Soft Off state (S5) [Enabled]
U32G2_C18 Type C Power Mode [Auto]
Alteration Mode Switch [PCIE Link Speed]
PCIEX16 Link Mode [Auto]
M.2 Link Mode [Auto]
Chipset_1 Link Mode [Auto]
GEN-Z.2_1 Link Mode [Auto]
GEN-Z.2_2 Link Mode [Auto]
Chipset_2 Link Mode [Auto]
PCIEX1 Link Mode [Auto]
Primary Video Device [PCIE Video]
Integrated Graphics [Disabled]
Global C-state Control [Auto]
IOMMU [Auto]
ECC [Auto]
SMT Control [Auto]
Core Performance Boost [Auto]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
L1 Stride Prefetcher [Auto]
L1 Region Prefetcher [Auto]
L2 Up/Down Prefetcher [Auto]
Core Watchdog Timer Enable [Disabled]
Platform First Error Handling [Auto]
Opcache Control [Auto]
Streaming Stores Control [Auto]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
MCA error thresh enable [Auto]
SMU and PSP Debug Mode [Auto]
PPIN Opt-in [Auto]
Enhanced REP MOVSB/STOSB [Enabled]
REP-MOV/STOS Streaming [Enabled]
Xtrig7 Workaround [Auto]
SNP Memory (RMP Table) Coverage [Auto]
SMEE [Auto]
Action on BIST Failure [Auto]
PAUSE Delay [Auto]
Power Supply Idle Control [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
DRAM map inversion [Auto]
Location of private memory regions [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
Disable DF to external downstream IP Sync Flood Propagation [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
DF Cstates [Auto]
PSP error injection support [False]
Active Memory Timing Settings [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor CS drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Processor ODT impedance [Auto]
Processor DQ drive strengths [Auto]
Dram DQ drive strengths [Auto]
Power Down Enable [Auto]
Disable Memory Error Injection [Auto]
TSME [Auto]
Data Scramble [Auto]
Chipselect Interleaving [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Subchannel [Auto]
BankSwapMode [Auto]
DFE Read Training [Auto]
DRAM PDA Enumerate ID Programming Mode [Auto]
TX DFE Taps [Auto]
PPT Control [Auto]
MBIST Enable [Auto]
Memory Context Restore [Auto]
OC Recovery Fail Count [1]
PCIe ARI Support [Auto]
PCIe All Port ECRC [Auto]
Advanced Error Reporting (AER) [Auto]
PCIe ARI Enumeration [Auto]
PSPP Policy [Auto]
UMA Version [Auto]
GPU Host Translation Cache [Auto]
NB Azalia [Auto]
Audio IOs [Auto]
PCIe loopback Mode [Auto]
Persistence mode for legacy endpoints [Auto]
Retimer margining support [Auto]
CPPC Dynamic Preferred Cores [Auto]
ECO Mode [Disable]
TDP Control [Auto]
PPT Control [Auto]
Thermal Control [Auto]
TDC Control [Auto]
EDC Control [Auto]
PROCHOT Control [Auto]
Fan Control [Auto]
VDDP Voltage Control [Auto]
Infinity Fabric Frequency and Dividers [Auto]
FEATURE FCLK DPM [Auto]
SyncFifo Mode Override [Auto]
GFXOFF [Auto]
CPU Temperature [Monitor]
CPU Package Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
Chipset 1 Temperature [Monitor]
Chipset 2 Temperature [Monitor]
T_Sensor Temperature [Monitor]
DIMM A Temperature [Monitor]
DIMM B Temperature [Monitor]
CPU Fan Speed [Monitor]
CPU Optional Fan Speed [Monitor]
Chassis Fan Speed [Monitor]
AIO Pump Speed [Monitor]
CPU Core Voltage [Monitor]
12V Voltage [Monitor]
5V Voltage [Monitor]
3.3V Voltage [Monitor]
CPU VDDIO / MC Voltage [Monitor]
HYDRANODE Fan Association [Enabled]
CPU Fan Q-Fan Control [PWM Mode]
CPU Fan Profile [Silent]
CPU Fan Q-Fan Source [CPU]
CPU Fan Step Up [Level 0]
CPU Fan Step Down [Level 0]
CPU Fan Speed Low Limit [200 RPM]
Chassis Fan Q-Fan Control [PWM Mode]
Chassis Fan Profile [Silent]
Chassis Fan Q-Fan Source [CPU]
Chassis Fan Step Up [Level 0]
Chassis Fan Step Down [Level 0]
Chassis Fan Speed Low Limit [200 RPM]
AIO Pump Q-Fan Control [DC Mode]
AIO Pump Profile [Manual]
AIO Pump Q-Fan Source [CPU]
AIO Pump Step Up [Level 0]
AIO Pump Step Down [Level 0]
AIO Pump Speed Low Limit [Ignore]
AIO Pump Point4 Temperature [70]
AIO Pump Point4 Duty Cycle (%) [80]
AIO Pump Point3 Temperature [60]
AIO Pump Point3 Duty Cycle (%) [80]
AIO Pump Point2 Temperature [50]
AIO Pump Point2 Duty Cycle (%) [80]
AIO Pump Point1 Temperature [20]
AIO Pump Point1 Duty Cycle (%) [80]
Launch CSM [Disabled]
OS Type [Windows UEFI mode]
Secure Boot Mode [Standard]
Fast Boot [Disabled]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Bootup NumLock State [On]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Disabled]
AMI Native NVMe Driver Support [Enabled]
Setup Mode [Advanced Mode]
BIOS Image Rollback Support [Enabled]
Publish HII Resources [Disabled]
Flexkey [Reset]
Setup Animator [Disabled]
Profile Name []
Save to Profile [1]
DIMM Slot Number [DIMM_A]
Download & Install ARMOURY CRATE app [Disabled]
Download & Install MyASUS service & app [Disabled]
Special Display Features [Disabled]
D3Cold Support [Disabled]
Discrete GPU _DSM Function A [Disabled]
Discrete GPU _DSM Function B [Disabled]
NVIDIA DGPU Power Enable [Disabled]
Non-Eval Discrete GPU Support [Enabled]
Discrete GPU HPD Circuitry [OR Circuitry]
Discrete GPU's USB Port [Keep Default Setting]
Discrete GPU's SSID/SVID [Keep Default Setting]
Discrete GPU BOMACO Support [Disabled]
Thunderbolt / USB4 Support [Enabled]
Thunderbolt / USB4 Security Level [No Security]
Thunderbolt / USB4 MMIO Resource [Full Size]
Thunderbolt / USB4 Wake Up Command [GO2SX Command]
Processor Aggregator Device [Enabled]
Core Count Control [Enabled]
SMT Control [Auto]
Active Memory Timing Settings [Auto]
Processor CA drive strengths [Auto]
Processor DQ drive strengths [Auto]
Processor ODT impedance [Auto]
Dram DQ drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Power Down Enable [Auto]
Infinity Fabric Frequency and Dividers [Auto]
UCLK DIV1 MODE [Auto]
Precision Boost Overdrive [Auto]
VDDG Voltage Control [Auto]
VDDP Voltage Control [Auto]
SoC/Uncore OC Mode [Auto]
SoC Voltage [0]
VDD Misc Control [Auto]
LCLK Frequency Control [Auto]
VDDIO Ctrl [Auto]
Enable Platform PMIC Control [Auto]
VPP Ctrl [Auto]

what tool you use to generate that info ? and how to set/test curve optimzer ?

To generate the info you just need to save bios to usb key.

How to test and set curve optimizer is explained here: https://www.youtube.com/watch?v=9BwNt6PD-00&t=1281s

aphysically
Level 8

Why is 1401 beta changelog the same as 1303? Was it released by mistake? How can we make informed beta choices if there's no listed changes?

Probably improving on what they are trying to achieve with 1303 BIOS

lordofwater
Level 9

i have a p41 platinum sk hynix so i ask you is supported the p41 platinum in the x670e extreme?

fabiosun
Level 8

back to 1303 on my Asus X670e hero because 1401 beta introduces stability issues

I do not overclock my 7950x, I use my 4 Kingston beast memory dimms to 4800 Mhz (128 Gb) and with previous bioses my system is rock solid

crisgen
Level 9

Hello everyone and forgive me if I take advantage of the discussion but I'm very confused and hesitant. I was almost ready to complete the order for the crosshair x670e-e and the Ryzen 7 7800X3D but this bad story and still not knowing whose real responsibility is blocked me. I've always trusted Asus but... I've always been taught that trust is achieved with sincerity and truth but this time around I see too many heads hiding under the table. I think the problem is also hardware (design and components). Do you think we can even get to a hardware revision of motherboards with socket AM5?

Hey, buddy, I am in the same situation now. I even started this thread to hear what other people think. I was just a few days away from buying ROG Strix X670E-E and 7800X3D when the news literally exploded. Now I am just waiting to see how the things will develop.

Tbh, I have built all my PCs with ASUS motherboards for the last 20 years and can't say that I have been disappointed. The probability to encounter the same problem with a burnt CPU is very, very low (even in the GN video they admit to that) but obviously something with the ASUS mobos is not right here so I am also waiting to see whether ASUS will declare a second revision of their mobos (something that we have seen other vendors do in the past, albeit on rare occasions). On the other hand, from what I got from the GN video, ASUS have the necessary controllers already in place on their mobos and it is just a poor implementation in the BIOS not to utilize it ("laziness" as they called it in the GN video) so maybe the things could be fixed just after a few BIOS releases.