cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

1,347 Views
2,100 REPLIES 2,100

Squidbean
Level 9

Argh of course I forgot to post the link: 

https://imgur.com/a/yFHLlen

Here it is

kamyk155
Level 10

I don't think my problem with GPU is connected to this 1003 beta bios. Few days ago when I posted here I had some other problems but I remember good thet I had bios beeper sounds about missing GPU too but computer started. Then I had on other bios this info at start about GPU compatibility problem (after beeper sounds). From the beginning on this platform I had 922, 925, 1001, 1002 and 1003 bios in really short time interval (new bios after 2-4 days).

Based on that information, you're probably be right about it not being the BIOS. It might just be a bug that says there's an issue but there is nothing really wrong.

In the new 1004 test BIOS Shamino posted, theres a fix labeled "Non-UEFI VGA card cannot display issue" so maybe it's connected to that.

tommy76000
Level 8

1004: fixed a hi dram v mode enabled bug + Fix Non-UEFI VGA card cannot display issue

@ShaminoIs this hi dram v mode connected to issues with MCR?

Thanks for fixing this Non-UEFI VGA card cannot display issue 🙂

no , totally unrelated

 

Apothocary
Level 9

24/48GB module support pulled in 1003, too?

no its just 1004

DNABrooker
Level 8

I got the X670e Extreme Board with a 7950x3D with 32GB GSKILL 6000 CL30, i get some random popups with the following Message:

"WARNING!: WARNING! Water leak detected. For system safety, the system will shut down in 5 seconds."

I didnt have any Leak detection sensor plugged in, i can reproduce this in certain games.

Can somebody help with it?

Sorry for disturb. We have same hardware components and I've (for the second time) the same warning message. Have you find why and how fix?

Braegnok
Level 14

Thanks for all your hard work!

I loaded 1004 this afternoon, everything is working great on Gene. 

Screenshot 2023-03-24 160824.jpg