cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

832 Views
2,462 REPLIES 2,462

tommy7600
Level 10
Just tested 0805 on X670E Hero. The same long booting time compared to e.g. x570. Do you plan to fix this? Or maybe AGESA need to be updated to address this issue with evaluating RAM each time? I read that other vendors have the same issue.

My setup:
MB: Asus ROG X670 HERO
CPU: AMD Ryzen 9 7950X
GPU: Asus TUF OC 4090
RAM: 64GB (2x32GB) G.Skill F5-6000J3040G32GX2-TZ5RS

tommy7600 wrote:
Just tested 0805 on X670E Hero. The same long booting time compared to e.g. x570. Do you plan to fix this?


OR.......

You can read the 18 pages and figure out how to minimize the boot time?

It's all here 🙌

Kingdramanyz wrote:
OR.......

You can read the 18 pages and figure out how to minimize the boot time?

It's all here 🙌


1. I read many topics about AM5 slow boot time
2. I read this one as well
3. I didn't find proper solution.
4. It seems that the MB each time tries to check/evaluate RAM. It's not only ASUS issue. Mayby AGESA need to be updated? I don't know. |
5. It's not cool to assume that someone didn't read the topic before.

F1Aussie
Level 11
Hey guys I booted up my new rig with 7700x in it today and strix e mobo. What are the main settings I should tweak in my bios. Also I have not been able to find any info about how to enable amd expo anywhere, how do I do this? Cheers

F1Aussie
Level 11
I know cpu userbench is scummy towards AMD but i have always benchmarked my cpu / system on there just to compare with like amd systems to see where I stand. I have done a few benchmarks tonight and the results are pretty bad. Now atm I am only running the igpu as my 4090 won't be here for maybe 3 weeks. Would not having a proper gpu installed affect the cpu, ram and hdd results much? As you can see from the image I am at the bottom end in all metrics. I have not played with any bios settings as I don't know where to start with zen 4. Cheers96224

kai-DE
Level 8
@shamino After flashing 0805 Every Time I do a reboot I get the Black Screen with Bios is Updating and the for following Power Cycle.*
*How do I get rid of this?

kai-DE wrote:
@shamino After flashing 0805 Every Time I do a reboot I get the Black Screen with Bios is Updating and the for following Power Cycle.*
*How do I get rid of this?


I get the same thing and AFIK this is normal behavior.

kai-DE
Level 8
This is definately not normal. Shamino? Whats going on here.*

Owner5566
Level 8
Shamino wrote:

ocpak/octools:
https://www.dropbox.com/s/radr1dbvftnhd0l/c9_ocpak_1111.zip?dl=0


Hey,
do you know the reason why MemTweakIt shows different info/fields for different CPU Generations/Platforms?
For example Channel Information is missing. In Aida for example it says also only Dual Channel for the 7900x, Is it really dual channel and intel quad?
Thanks for your work

Aida Screenshot 7900x
96285

MemTweakIt Screenshot 7900x:
96282

MemTweakIt Screenshot 13900k:
96283

MemTweakIt Screenshot 5800x3D:
96284

My current setting thanks to your Bios 😄
96286

Poloasis
Level 9
Is the 0805 beta same as the official release. Should i reflash 0805 from official release?