cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

836 Views
2,454 REPLIES 2,454

Tsikos
Level 10
@Shamino please check this screenshots after the bios you ask me to test the system is solid with xmp ii also with today bios 0804 but my problem with pbo still exist here some screenshots!

https://imgur.com/oZfsjMY
https://imgur.com/18cl2fI
https://imgur.com/Do8XRhh
https://imgur.com/4gNCqF2

Shamino
Moderator
Tsikos im unable to help you with that
PBO enhancement is too aggressive for your cpu, it applies a negative CO your cpu cannot run stable at.

Shamino wrote:
Tsikos im unable to help you with that
PBO enhancement is too aggressive for your cpu, it applies a negative CO your cpu cannot run stable at.


I try bios flashback and now i can enable eco mode 105 & 65watt options so something with bios updates make this problems!

@Shamino Did I unterstand it right that 0804 is the 0803 with old fw + some Thunderbolt Patch?Â*
Asking cause I still have problems with ICUE not seeing corsair ram unless I disable Thunderbolt.Â*

Shamino
Moderator
updated with 0805 , fixed the bug of vrm telemetry from Embedded Controller not enabled.

Shamino wrote:
updated with 0805 , fixed the bug of vrm telemetry from Embedded Controller not enabled.


Does 0805 contain all fixes and changes to date? What AGESA version is this one?

Poloasis
Level 9
@Shamino
Is it possible for you to investigate this thread below about the CPU/PCK been locked after boot up on the Asus x670e class MB?
https://forums.aida64.com/topic/10456-7950x-cpu-temp-issue/

Cr
Level 7
Hey there, I got a Crossshair X670E HHero with a R9 7900X. Tried to run at least EXPO on one of my DDR5 Kits. No success Board will not run with Expo Timings. Kit 1 are the Fury Beast KFC560C36BBEAK2-32 and the other Kit is the G.Skill Trident Z5 Neo F5-6000J3038F16GX2-TZ5NR. Of course I don't want to run them together, first I bought thhe Kingston and now the G.Skill. Realy frustated now. ...

Xerp1
Level 7
Hi everyone, i have problems with Strix X670E-F Wifi with R9 7950X (without OC), both with the bios 0705 and with 0805, when my system is at iddle, Windows freeze and after a 2 minutes restarts. This only happen with the system is on low load (for example browsing or watching a video) , when it is under load as it is playing, the system never freeze and restart.

And i cant run stable DOCP1 and 2 with my kit G.skill F5-6000J4040F16GX2-TZ5RK, only on auto run stable.

Xerp1 wrote:
Hi everyone, i have problems with Strix X670E-F Wifi with R9 7950X (without OC), both with the bios 0705 and with 0805, when my system is at iddle, Windows freeze and after a 2 minutes restarts. This only happen with the system is on low load (for example browsing or watching a video) , when it is under load as it is playing, the system never freeze and restart.

And i cant run stable DOCP1 and 2 with my kit G.skill F5-6000J4040F16GX2-TZ5RK, only on auto run stable.


Cr@zed^ ; wrote:
Hey there, I got a Crossshair X670E HHero with a R9 7900X. Tried to run at least EXPO on one of my DDR5 Kits. No success Board will not run with Expo Timings. Kit 1 are the Fury Beast KFC560C36BBEAK2-32 and the other Kit is the G.Skill Trident Z5 Neo F5-6000J3038F16GX2-TZ5NR. Of course I don't want to run them together, first I bought thhe Kingston and now the G.Skill. Realy frustated now. ...


try this link https://www.overclock.net/threads/asus-rog-crosshair-x670e-overclocking-discussion-thread.1799959/pa...
Hopefully this helps. I followed it and I am running stable at 6200M/Ts for my G.Skill Trident Z5 Neo F5-6000J3038F16GX2-TZ5NR memory.