cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

11,509 Views
2,907 REPLIES 2,907

@SAFEDISK 

MEMORY FAIL - WINDOWS BLUE SCREEN OF THE DEATH

Ai Overclock Tuner [Auto]
Memory Frequency [DDR5-6200MHz]
FCLK Frequency [2167 MHz]
Core Performance Boost [Enabled]
CPU Core Ratio [CPU Core Ratio]
CPU Core Ratio [48.00]
Core VID [Auto]
CCX0 Ratio [52.00]
CCX0 Ratio [52.00]
Dynamic OC Switcher [Enabled]
Current Threshold to Switch to OC Mode [60]
Calibrated Temperature Threshold to switch back [85]
Hysteresis [0]
GPU Boost [Auto]
Tcl [32]
Trcd [38]
Trp [38]
Tras [36]
Trc [38]
Twr [48]
Refresh Interval [65528]
Trfc1 [500]
Trfc2 [465]
Trfcsb [417]
Trtp [24]
TrrdL [8]
TrrdS [4]
Tfaw [32]
TwtrL [20]
TwtrS [8]
TrdrdScl [8]
TrdrdSc [1]
TrdrdSd [8]
Trdrddd [8]
TwrwrScl [15]
TwrwrSc [1]
TwrwrSd [11]
TwrwrDd [8]
Twrrd [6]
Trdwr [18]
IBUF_LPWR_MODE [Enabled]
ADDR_CMD_MODE [UnBuf]
M_ORDERING [STRICT]
S_COL_WIDTH [Auto]
MC_SVA_TRIM0 [Auto]
MC_SVA_TRIM1 [Auto]
MC_SVA_TRIM2 [Auto]
MMCM_MULT_F [Enabled]
CA ODT GroupA [Auto]
CK ODT GroupA [Auto]
CS ODT GroupA [Auto]
CA ODT GroupB [Auto]
CK ODT GroupB [Auto]
CS ODT GroupB [Auto]
Processor ODT P state mode [Sync all P-states]
Processor ODT Impedance Pull Up P0 [Auto]
Processor ODT Impedance Pull Down P0 [Auto]
Processor DQ drive strengths Pull Up P0 [Auto]
Processor DQ drive strengths Pull Down P0 [Auto]
Dram ODT Impedance RTT_NOM_WR P0 [Auto]
Dram ODT impedance RTT_NOM_RD P0 [Auto]
Dram ODT impedance RTT_WR P0 [Auto]
Dram ODT impedance RTT_PARK P0 [Auto]
Dram ODT impedance DQS_RTT_PARK P0 [Auto]
Dram DQ drive strengths Pull Up P0 [Auto]
Dram DQ drive strengths Pull Down P0 [Auto]
Proc CS Drive Strength [Auto]
Proc CK Drive Strength [Auto]
Proc CA Drive Strength [Auto]
Proc Data Drive Strength [Auto]
CPU On-Die Termination [Auto]
DRAM Data Drive Strength [Auto]
Rtt Nom Wr [Auto]
Rtt Nom Rd [Auto]
Rtt Wr [Auto]
Rtt Park [Auto]
Rtt Park Dqs [Auto]
Power Down Enable [Enabled]
Memory Context Restore [Enabled]
UCLK DIV1 MODE [UCLK=MEMCLK]
CA Tx Phase Shift Clk [Auto]
CS Tx Phase Shift Clk [Auto]
CK Tx Phase Shift Clk [Auto]
CA Rx Phase Shift Clk [Auto]
CS Rx Phase Shift Clk [Auto]
CK Rx Phase Shift Clk [Auto]
FIFO Wr En Fine Delay [Auto]
POC Sample PD [Disabled]
Bank Swap Mode [Auto]
Mem Over Clock Fail Count [Auto]
Prochot VRM Throttling [Enable]
Peak Current Control [Enable]
Medium Load Boostit [Enabled]
Precision Boost Overdrive [Manual]
PPT Limit [142]
TDC Limit [125]
EDC Limit [170]
Precision Boost Overdrive Scalar [Manual]
Customized Precision Boost Overdrive Scalar [8x]
CPU Boost Clock Override [Enabled (Positive)]
Max CPU Boost Clock Override(+) [100]
Per-Core Boost Clock Limit [Enabled]
Core 0 [Auto]

Core 15 [Auto]
Platform Thermal Throttle Limit [Manual]
Platform Thermal Throttle Limit [89]
Curve Optimizer [Per Core]
Core 0 Curve Optimizer Sign [Negative]
Core 0 Curve Optimizer Magnitude [25]
Core 1 Curve Optimizer Sign [Negative]
Core 1 Curve Optimizer Magnitude [25]
Core 2 Curve Optimizer Sign [Negative]
Core 2 Curve Optimizer Magnitude [25]
Core 3 Curve Optimizer Sign [Negative]
Core 3 Curve Optimizer Magnitude [25]
Core 4 Curve Optimizer Sign [Negative]
Core 4 Curve Optimizer Magnitude [25]
Core 5 Curve Optimizer Sign [Negative]
Core 5 Curve Optimizer Magnitude [25]
Core 6 Curve Optimizer Sign [Negative]
Core 6 Curve Optimizer Magnitude [25]
Core 7 Curve Optimizer Sign [Negative]
Core 7 Curve Optimizer Magnitude [25]
Core 8 Curve Optimizer Sign [Negative]
Core 8 Curve Optimizer Magnitude [25]
Core 9 Curve Optimizer Sign [Negative]
Core 9 Curve Optimizer Magnitude [25]
Core 10 Curve Optimizer Sign [Negative]
Core 10 Curve Optimizer Magnitude [25]
Core 11 Curve Optimizer Sign [Negative]
Core 11 Curve Optimizer Magnitude [25]
Core 12 Curve Optimizer Sign [Negative]
Core 12 Curve Optimizer Magnitude [25]
Core 13 Curve Optimizer Sign [Negative]
Core 13 Curve Optimizer Magnitude [25]
Core 14 Curve Optimizer Sign [Negative]
Core 14 Curve Optimizer Magnitude [25]
Core 15 Curve Optimizer Sign [Negative]
Core 15 Curve Optimizer Magnitude [25]
GFX Curve Optimizer [GFX Curve Optimizer]
GFX Curve Optimizer Sign [Negative]
GFX Curve Optimizer Magnitude [0]
Min Frequency - Low Temperature [Auto]
Min Frequency - Med Temperature [Auto]
Min Frequency - High Temperature [Auto]
Low Frequency - Low Temperature [Auto]
Low Frequency - Med Temperature [Auto]
Low Frequency - High Temperature [Auto]
Med Frequency - Low Temperature [Auto]
Med Frequency - Med Temperature [Auto]
Med Frequency - High Temperature [Auto]
High Frequency - Low Temperature [Auto]
High Frequency - Med Temperature [Auto]
High Frequency - High Temperature [Auto]
Max Frequency - Low Temperature [Auto]
Max Frequency - Med Temperature [Auto]
Max Frequency - High Temperature [Auto]
VRM Initialization Check [Enabled]
Voltage training [Enabled]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU Power Duty Control [Extreme]
CPU Power Phase Control [Manual]
Power Phase Response [Ultra Fast]
VDDSOC Current Capability [Auto]
VDDSOC Power Duty Control [Extreme]
VDDSOC Power Phase Control [Manual]
Power Phase Response [Ultra Fast]
Performance Bias [None]
Clock Spread Spectrum [Disabled]
Stretch mode for L3 DFLL [Enabled]
1.8V PLL Voltage [Auto]
1.8V Standby Voltage [Auto]
Misc_ALW [Auto]
Chipset 1.05V [Auto]
Algorithm 1 [Disabled]
Algorithm 2 [Disabled]
Algorithm 3 [Disabled]
CCD Priority Memory Activity Threshold [1070]
CCD Priority Hysteresis [Auto]
Cooler Efficiency Customize [Keep Training]
Cooler Re-evaluation Algorithm [Very inclined to update]
Optimism Scale [100]
CPU Core Voltage [Auto]
CPU SOC Voltage [Auto]
CPU VDDIO / MC Voltage [1.40000]
Misc Voltage [Offset Mode]
- Offset Mode Sign [+]
- Misc Voltage Offset [0.05200]
VDDP Voltage [1.066]
High DRAM Voltage Mode [Auto]
DRAM VDD Voltage [1.40000]
DRAM VDDQ Voltage [1.40000]
VDDG CCD Voltage [Auto]
VDDG IOD Voltage [Auto]
PMIC Force Continuous Current Mode [Enabled]
PMIC Voltages [By per PMIC]
PMIC1 SPD HUB VLDO (1.8V) [Auto]
PMIC1 SPD HUB VDDIO (1.0V) [Auto]
PMIC1 Memory VDD Voltage [1.40000]
PMIC1 Memory VDDQ Voltage [1.40000]
PMIC1 Memory VPP Voltage [Auto]
PMIC1 Memory Voltage Switching Frequency [Auto]
PMIC1 Memory Current Capability [Auto]
PMIC3 SPD HUB VLDO (1.8V) [Auto]
PMIC3 SPD HUB VDDIO (1.0V) [Auto]
PMIC3 Memory VDD Voltage [1.40000]
PMIC3 Memory VDDQ Voltage [1.40000]
PMIC3 Memory VPP Voltage [Auto]
PMIC3 Memory Voltage Switching Frequency [Auto]
PMIC3 Memory Current Capability [Auto]
Security Device Support [Enabled]
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
Firmware TPM switch [Enable Firmware TPM]
Erase fTPM NV for factory reset [Enabled]
Password protection of Runtime Variables [Enable]
PSS Support [Enabled]
NX Mode [Enabled]
SVM Mode [Enabled]
Above 4G Decoding [Enabled]
Resize BAR Support [Enabled]
SR-IOV Support [Enabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
U32G2_C2 [Enabled]
U32G2_3 [Enabled]
U32G2_E1 [Enabled]
U32G2_E2 [Enabled]
U32G2_E3 [Enabled]
U32G2_E4 [Enabled]
USB5 [Enabled]
U32G2X2_C6 [Enabled]
U32G2_C10 [Enabled]
U32G1_8 [Enabled]
U32G1_9 [Enabled]
U32G2_11 [Enabled]
USB15 [Enabled]
USB16 [Enabled]
USB17 [Enabled]
Network Stack [Enabled]
IPv4 PXE Support [Enabled]
IPv6 PXE Support [Enabled]
Device [Hitachi HUA723020ALA641]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Restore AC Power Loss [Power Off]
ErP Ready [Disabled]
Max Power Saving [Disabled]
Power On By PCI-E [Disabled]
Power On By RTC [Disabled]
Native ASPM [Enabled]
CPU PCIE ASPM Mode Control [L0s And L1 Entry]
PCIEX16_1 Bandwidth Bifurcation Configuration [PCIE X16 Mode]
USB Audio Controller [Enabled]
Wi-Fi Controller [Enabled]
Bluetooth Controller [Enabled]
When system is in working state [All On]
Windows Dynamic Lighting [Disabled]
Q-Code LED Function [Auto]
When system is in sleep, hibernate or soft off states [All On]
Intel LAN Controller [Enabled]
USB power delivery in Soft Off state (S5) [Enabled]
ASMedia Storage Controller [Enabled]
Windows Hot-plug Notification [Enabled]
ASPM Support [Enabled]
PCIEX16_1 Link Mode [GEN 5]
PCIEX16_2 Link Mode [GEN 5]
M.2_3 Link Mode [GEN 5]
M.2_2 Link Mode [GEN 5]
Chipset Link Mode [GEN 4]
M.2_1 Link Mode [GEN 5]
PCIEX16_3 Link Mode [GEN 4]
M.2_4 Link Mode [GEN 4]
Primary Video Device [IGFX Video]
UMA Frame Buffer Size [1G]
Global C-state Control [Enabled]
IOMMU [Enabled]
ECC [Auto]
SMT Control [Auto]
Core Performance Boost [Auto]
L1 Stream HW Prefetcher [Enable]
L2 Stream HW Prefetcher [Enable]
L1 Stride Prefetcher [Enable]
L1 Region Prefetcher [Enable]
L1 Burst Prefetch Mode [Enable]
L2 Up/Down Prefetcher [Enable]
Core Watchdog Timer Enable [Auto]
RedirectForReturnDis [Auto]
Power Supply Idle Control [Typical Current Idle]
SEV Control [Auto]
Opcache Control [Enabled]
Streaming Stores Control [Enabled]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
Platform First Error Handling [Auto]
MCA error thresh enable [Auto]
MCA FruText [True]
SMU and PSP Debug Mode [Auto]
PPIN Opt-in [Enabled]
REP-MOV/STOS Streaming [Enabled]
Enhanced REP MOVSB/STOSB [Enabled]
Fast Short REP MOVSB (FSRM) [Enabled]
SNP Memory (RMP Table) Coverage [Enabled]
SMEE [Enable]
Action on BIST Failure [Auto]
Log Transparent Errors [Auto]
AVX512 [Enabled]
MONITOR and MWAIT disable [Auto]
Corrector Branch Predictor [Enabled]
PAUSE Delay [Auto]
CPU Speculative Store Modes [Balanced]
SVM Lock [Enabled]
SVM Enable [Enabled]
Memory interleaving [Enabled]
Memory interleaving size [Auto]
DRAM map inversion [Enabled]
Location of private memory regions [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
Disable DF to external downstream IP Sync Flood Propagation [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
DF Cstates [Enabled]
PSP error injection support [False]
Active Memory Timing Settings [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor CS drive strengths [Auto]
CA ODT GroupA [Auto]
CK ODT GroupA [Auto]
CS ODT GroupA [Auto]
CA ODT GroupB [Auto]
CK ODT GroupB [Auto]
CS ODT GroupB [Auto]
Processor ODT Impedance Pull Up P0 [Auto]
Processor ODT Impedance Pull Down P0 [Auto]
Processor DQ drive strengths Pull Up P0 [Auto]
Processor DQ drive strengths Pull Down P0 [Auto]
Dram ODT Impedance RTT_NOM_WR P0 [Auto]
Dram ODT impedance RTT_NOM_RD P0 [Auto]
Dram ODT impedance RTT_WR P0 [Auto]
Dram ODT impedance RTT_PARK P0 [Auto]
Dram ODT impedance DQS_RTT_PARK P0 [Auto]
Dram DQ drive strengths Pull Up P0 [Auto]
Dram DQ drive strengths Pull Down P0 [Auto]
Processor ODT Impedance Pull Up P1 [Auto]
Processor ODT Impedance Pull Down P1 [Auto]
Processor DQ drive strengths Pull Up P1 [Auto]
Processor DQ drive strengths Pull Down P1 [Auto]
Dram ODT Impedance RTT_NOM_WR P1 [Auto]
Dram ODT impedance RTT_NOM_RD P1 [Auto]
Dram ODT impedance RTT_WR P1 [Auto]
Dram ODT impedance RTT_PARK P1 [Auto]
Dram ODT impedance DQS_RTT_PARK P1 [Auto]
Dram DQ drive strengths Pull Up P1 [Auto]
Dram DQ drive strengths Pull Down P1 [Auto]
Processor ODT Impedance Pull Up P2 [Auto]
Processor ODT Impedance Pull Down P2 [Auto]
Processor DQ drive strengths Pull Up P2 [Auto]
Processor DQ drive strengths Pull Down P2 [Auto]
Dram ODT Impedance RTT_NOM_WR P2 [Auto]
Dram ODT impedance RTT_NOM_RD P2 [Auto]
Dram ODT impedance RTT_WR P2 [Auto]
Dram ODT impedance RTT_PARK P2 [Auto]
Dram ODT impedance DQS_RTT_PARK P2 [Auto]
Dram DQ drive strengths Pull Up P2 [Auto]
Dram DQ drive strengths Pull Down P2 [Auto]
Processor ODT Impedance Pull Up P3 [Auto]
Processor ODT Impedance Pull Down P3 [Auto]
Processor DQ drive strengths Pull Up P3 [Auto]
Processor DQ drive strengths Pull Down P3 [Auto]
Dram ODT Impedance RTT_NOM_WR P3 [Auto]
Dram ODT impedance RTT_NOM_RD P3 [Auto]
Dram ODT impedance RTT_WR P3 [Auto]
Dram ODT impedance RTT_PARK P3 [Auto]
Dram ODT impedance DQS_RTT_PARK P3 [Auto]
Dram DQ drive strengths Pull Up P3 [Auto]
Dram DQ drive strengths Pull Down P3 [Auto]
Power Down Enable [Enabled]
Disable Memory Error Injection [Auto]
TSME [Enabled]
Data Scramble [Enabled]
Chipselect Interleaving [Auto]
Address Hash Bank [Enabled]
Address Hash CS [Enabled]
Address Hash Subchannel [Enabled]
BankSwapMode [Auto]
DFE Read Training [Enable]
DRAM PDA Enumerate ID Programming Mode [Sequential PDA enumeration mode]
TX DFE Taps [4 Taps]
PPT Control [Auto]
DDR Training Runtime Reduction [Auto]
Rx Burst Length [8x]
Tx Burst Length [8x]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [4 Taps]
MBIST Enable [Enabled]
MBIST Test Mode [Both]
MBIST Aggressors [Enabled]
MBIST Per Bit Slave Die Reporting [Enabled]
Pattern Select [Both]
Pattern Length Select [Auto]
Aggressor Channel [7 Aggressor Channels]
Memory Context Restore [Enabled]
Read Drift Adjustment [Auto]
Read Drift Adjustment P0 [Auto]
Read Drift Adjustment P1 [Auto]
Read Drift Adjustment P2 [Auto]
Read Drift Adjustment P3 [Auto]
Write Drift Adjustment [Auto]
Write Drift Adjustment P0 [Auto]
Write Drift Adjustment P1 [Auto]
Write Drift Adjustment P2 [Auto]
Write Drift Adjustment P3 [Auto]
Pre-boot DMA Protection [Auto]
Kernel DMA Protection Indicator [Auto]
PCIe ARI Support [Auto]
PCIe All Port ECRC [Auto]
Advanced Error Reporting (AER) [Auto]
PCIe ARI Enumeration [Auto]
UMA Version [Non-Legacy]
GPU Host Translation Cache [Auto]
NB Azalia [Enabled]
Audio IOs [Auto]
PCIe loopback Mode [Auto]
Persistence mode for legacy endpoints [Auto]
EQ Bypass To Highest Rate [Enable]
Retimer margining support [Auto]
TDP Control [Manual]
ECO Mode [Disable]
TDP [140000]
PPT Control [Manual]
PPT [142000]
Thermal Control [Manual]
TjMax [74]
TDC Control [Manual]
TDC_VDDCR_VDD [125000]
EDC Control [Manual]
EDC_VDDCR_VDD [170000]
Fan Control [Auto]
VDDP Voltage Control [Auto]
Infinity Fabric Frequency and Dividers [2167 MHz]
SyncFifo Mode Override [Disable]
Sustained PowerLimit [0]
Fast PPT Limit [0]
Slow PPT Limit [0]
Slow PPT Time Constant [0]
GFXOFF [Auto]

OS Type [Windows UEFI mode]
Secure Boot Mode [Custom]
Fast Boot [Enabled]

CPU Frequency [0]
CPU Voltage [0]
SMT Control [Auto]
Prochot VRM Throttling [Auto]
Peak Current Control [Auto]
Active Memory Timing Settings [Auto]
Processor CS drive strengths [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor DQ drive strengths [Auto]
Processor ODT impedance [Auto]
Dram DQ drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Power Down Enable [Auto]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [4 Tap]
TX DFE Taps [4 Tap]
DDR5 Nitro Mode [Enable]
DDR5 Robust Training Mode [Enable]
Nitro RX Data [2]
Nitro TX Data [3]
Nitro Control Line [1]
Nitro Rx Burst Length [8X]
Nitro Tx Burst Length [8X]
Nitro DFE Vref Offset Limits [Auto]
Infinity Fabric Frequency and Dividers [Auto]
UCLK DIV1 MODE [UCLK=MEMCLK]
Precision Boost Overdrive [Auto]
VDDG Voltage Control [Auto]
VDDP Voltage Control [Auto]
SoC/Uncore OC Mode [Auto]
SoC Voltage [0]
LN2 Mode [Auto]
VDD Misc Control [Auto]
LCLK Frequency Control [Auto]
VDDIO Ctrl [Auto]
PMIC VDD Stepping Control [Auto]
PMIC VDDQ Stepping Control [Auto]
Enable Platform PMIC Control [Auto]
VPP Ctrl [Auto]
ECO Mode [Auto]

@SAFEDISK 

FAIL KERNELFAIL KERNEL

Ai Overclock Tuner [Auto]
Memory Frequency [DDR5-6000MHz]
FCLK Frequency [2167 MHz]
Core Performance Boost [Enabled]
CPU Core Ratio [CPU Core Ratio]
CPU Core Ratio [48.00]
Core VID [Auto]
CCX0 Ratio [52.00]
CCX0 Ratio [52.00]
Dynamic OC Switcher [Enabled]
Current Threshold to Switch to OC Mode [60]
Calibrated Temperature Threshold to switch back [85]
Hysteresis [0]
GPU Boost [Auto]
Tcl [32]
Trcd [38]
Trp [38]
Tras [36]
Trc [74]
Twr [48]
Refresh Interval [65528]
Trfc1 [416]
Trfc2 [416]
Trfcsb [416]
Trtp [24]
TrrdL [8]
TrrdS [4]
Tfaw [32]
TwtrL [20]
TwtrS [8]
TrdrdScl [8]
TrdrdSc [1]
TrdrdSd [8]
Trdrddd [8]
TwrwrScl [15]
TwrwrSc [1]
TwrwrSd [11]
TwrwrDd [8]
Twrrd [6]
Trdwr [18]
IBUF_LPWR_MODE [Enabled]
ADDR_CMD_MODE [UnBuf]
M_ORDERING [STRICT]
S_COL_WIDTH [Auto]
MC_SVA_TRIM0 [Auto]
MC_SVA_TRIM1 [Auto]
MC_SVA_TRIM2 [Auto]
MMCM_MULT_F [Enabled]
CA ODT GroupA [Auto]
CK ODT GroupA [Auto]
CS ODT GroupA [Auto]
CA ODT GroupB [Auto]
CK ODT GroupB [Auto]
CS ODT GroupB [Auto]
Processor ODT P state mode [Sync all P-states]
Processor ODT Impedance Pull Up P0 [Auto]
Processor ODT Impedance Pull Down P0 [Auto]
Processor DQ drive strengths Pull Up P0 [Auto]
Processor DQ drive strengths Pull Down P0 [Auto]
Dram ODT Impedance RTT_NOM_WR P0 [Auto]
Dram ODT impedance RTT_NOM_RD P0 [Auto]
Dram ODT impedance RTT_WR P0 [Auto]
Dram ODT impedance RTT_PARK P0 [Auto]
Dram ODT impedance DQS_RTT_PARK P0 [Auto]
Dram DQ drive strengths Pull Up P0 [Auto]
Dram DQ drive strengths Pull Down P0 [Auto]
Proc CS Drive Strength [Auto]
Proc CK Drive Strength [Auto]
Proc CA Drive Strength [Auto]
Proc Data Drive Strength [Auto]
CPU On-Die Termination [Auto]
DRAM Data Drive Strength [Auto]
Rtt Nom Wr [Auto]
Rtt Nom Rd [Auto]
Rtt Wr [Auto]
Rtt Park [Auto]
Rtt Park Dqs [Auto]
Power Down Enable [Enabled]
Memory Context Restore [Enabled]
UCLK DIV1 MODE [UCLK=MEMCLK]
CA Tx Phase Shift Clk [Auto]
CS Tx Phase Shift Clk [Auto]
CK Tx Phase Shift Clk [Auto]
CA Rx Phase Shift Clk [Auto]
CS Rx Phase Shift Clk [Auto]
CK Rx Phase Shift Clk [Auto]
FIFO Wr En Fine Delay [Auto]
POC Sample PD [Disabled]
Bank Swap Mode [Auto]
Mem Over Clock Fail Count [Auto]
Prochot VRM Throttling [Enable]
Peak Current Control [Enable]
Medium Load Boostit [Enabled]
Precision Boost Overdrive [Manual]
PPT Limit [142]
TDC Limit [125]
EDC Limit [170]
Precision Boost Overdrive Scalar [Manual]
Customized Precision Boost Overdrive Scalar [8x]
CPU Boost Clock Override [Enabled (Positive)]
Max CPU Boost Clock Override(+) [100]
Per-Core Boost Clock Limit [Enabled]
Core 0 [Auto]

Core 15 [Auto]
Platform Thermal Throttle Limit [Manual]
Platform Thermal Throttle Limit [89]
Curve Optimizer [Per Core]
Core 0 Curve Optimizer Sign [Negative]
Core 0 Curve Optimizer Magnitude [25]
Core 1 Curve Optimizer Sign [Negative]
Core 1 Curve Optimizer Magnitude [25]
Core 2 Curve Optimizer Sign [Negative]
Core 2 Curve Optimizer Magnitude [25]
Core 3 Curve Optimizer Sign [Negative]
Core 3 Curve Optimizer Magnitude [25]
Core 4 Curve Optimizer Sign [Negative]
Core 4 Curve Optimizer Magnitude [25]
Core 5 Curve Optimizer Sign [Negative]
Core 5 Curve Optimizer Magnitude [25]
Core 6 Curve Optimizer Sign [Negative]
Core 6 Curve Optimizer Magnitude [25]
Core 7 Curve Optimizer Sign [Negative]
Core 7 Curve Optimizer Magnitude [25]
Core 8 Curve Optimizer Sign [Negative]
Core 8 Curve Optimizer Magnitude [25]
Core 9 Curve Optimizer Sign [Negative]
Core 9 Curve Optimizer Magnitude [25]
Core 10 Curve Optimizer Sign [Negative]
Core 10 Curve Optimizer Magnitude [25]
Core 11 Curve Optimizer Sign [Negative]
Core 11 Curve Optimizer Magnitude [25]
Core 12 Curve Optimizer Sign [Negative]
Core 12 Curve Optimizer Magnitude [25]
Core 13 Curve Optimizer Sign [Negative]
Core 13 Curve Optimizer Magnitude [25]
Core 14 Curve Optimizer Sign [Negative]
Core 14 Curve Optimizer Magnitude [25]
Core 15 Curve Optimizer Sign [Negative]
Core 15 Curve Optimizer Magnitude [25]
GFX Curve Optimizer [GFX Curve Optimizer]
GFX Curve Optimizer Sign [Negative]
GFX Curve Optimizer Magnitude [0]
Min Frequency - Low Temperature [Auto]
Min Frequency - Med Temperature [Auto]
Min Frequency - High Temperature [Auto]
Low Frequency - Low Temperature [Auto]
Low Frequency - Med Temperature [Auto]
Low Frequency - High Temperature [Auto]
Med Frequency - Low Temperature [Auto]
Med Frequency - Med Temperature [Auto]
Med Frequency - High Temperature [Auto]
High Frequency - Low Temperature [Auto]
High Frequency - Med Temperature [Auto]
High Frequency - High Temperature [Auto]
Max Frequency - Low Temperature [Auto]
Max Frequency - Med Temperature [Auto]
Max Frequency - High Temperature [Auto]
VRM Initialization Check [Enabled]
Voltage training [Enabled]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU Power Duty Control [Extreme]
CPU Power Phase Control [Manual]
Power Phase Response [Ultra Fast]
VDDSOC Current Capability [Auto]
VDDSOC Power Duty Control [Extreme]
VDDSOC Power Phase Control [Manual]
Power Phase Response [Ultra Fast]
Performance Bias [None]
Clock Spread Spectrum [Disabled]
Stretch mode for L3 DFLL [Enabled]
1.8V PLL Voltage [Auto]
1.8V Standby Voltage [Auto]
Misc_ALW [Auto]
Chipset 1.05V [Auto]
Algorithm 1 [Disabled]
Algorithm 2 [Disabled]
Algorithm 3 [Disabled]
CCD Priority Memory Activity Threshold [1070]
CCD Priority Hysteresis [Auto]
Cooler Efficiency Customize [Keep Training]
Cooler Re-evaluation Algorithm [Very inclined to update]
Optimism Scale [100]
CPU Core Voltage [Auto]
CPU SOC Voltage [Auto]
CPU VDDIO / MC Voltage [1.40000]
Misc Voltage [Offset Mode]
- Offset Mode Sign [+]
- Misc Voltage Offset [0.05200]
VDDP Voltage [1.066]
High DRAM Voltage Mode [Auto]
DRAM VDD Voltage [1.40000]
DRAM VDDQ Voltage [1.40000]
VDDG CCD Voltage [Auto]
VDDG IOD Voltage [Auto]
PMIC Force Continuous Current Mode [Enabled]
PMIC Voltages [By per PMIC]
PMIC1 SPD HUB VLDO (1.8V) [Auto]
PMIC1 SPD HUB VDDIO (1.0V) [Auto]
PMIC1 Memory VDD Voltage [1.40000]
PMIC1 Memory VDDQ Voltage [1.40000]
PMIC1 Memory VPP Voltage [Auto]
PMIC1 Memory Voltage Switching Frequency [Auto]
PMIC1 Memory Current Capability [Auto]
PMIC3 SPD HUB VLDO (1.8V) [Auto]
PMIC3 SPD HUB VDDIO (1.0V) [Auto]
PMIC3 Memory VDD Voltage [1.40000]
PMIC3 Memory VDDQ Voltage [1.40000]
PMIC3 Memory VPP Voltage [Auto]
PMIC3 Memory Voltage Switching Frequency [Auto]
PMIC3 Memory Current Capability [Auto]
Security Device Support [Enabled]
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
Firmware TPM switch [Enable Firmware TPM]
Erase fTPM NV for factory reset [Enabled]
Password protection of Runtime Variables [Enable]
PSS Support [Enabled]
NX Mode [Enabled]
SVM Mode [Enabled]
Above 4G Decoding [Enabled]
Resize BAR Support [Enabled]
SR-IOV Support [Enabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
U32G2_C2 [Enabled]
U32G2_3 [Enabled]
U32G2_E1 [Enabled]
U32G2_E2 [Enabled]
U32G2_E3 [Enabled]
U32G2_E4 [Enabled]
USB5 [Enabled]
U32G2X2_C6 [Enabled]
U32G2_C10 [Enabled]
U32G1_8 [Enabled]
U32G1_9 [Enabled]
U32G2_11 [Enabled]
USB15 [Enabled]
USB16 [Enabled]
USB17 [Enabled]
Network Stack [Enabled]
IPv4 PXE Support [Enabled]
IPv6 PXE Support [Enabled]
Device [Hitachi HUA723020ALA641]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Restore AC Power Loss [Power Off]
ErP Ready [Disabled]
Max Power Saving [Disabled]
Power On By PCI-E [Disabled]
Power On By RTC [Disabled]
Native ASPM [Enabled]
CPU PCIE ASPM Mode Control [L0s And L1 Entry]
PCIEX16_1 Bandwidth Bifurcation Configuration [PCIE X16 Mode]
USB Audio Controller [Enabled]
Wi-Fi Controller [Enabled]
Bluetooth Controller [Enabled]
When system is in working state [All On]
Windows Dynamic Lighting [Disabled]
Q-Code LED Function [Auto]
When system is in sleep, hibernate or soft off states [All On]
Intel LAN Controller [Enabled]
USB power delivery in Soft Off state (S5) [Enabled]
ASMedia Storage Controller [Enabled]
Windows Hot-plug Notification [Enabled]
ASPM Support [Enabled]
PCIEX16_1 Link Mode [GEN 5]
PCIEX16_2 Link Mode [GEN 5]
M.2_3 Link Mode [GEN 5]
M.2_2 Link Mode [GEN 5]
Chipset Link Mode [GEN 4]
M.2_1 Link Mode [GEN 5]
PCIEX16_3 Link Mode [GEN 4]
M.2_4 Link Mode [GEN 4]
Primary Video Device [IGFX Video]
UMA Frame Buffer Size [1G]
Global C-state Control [Enabled]
IOMMU [Enabled]
ECC [Auto]
SMT Control [Auto]
Core Performance Boost [Auto]
L1 Stream HW Prefetcher [Enable]
L2 Stream HW Prefetcher [Enable]
L1 Stride Prefetcher [Enable]
L1 Region Prefetcher [Enable]
L1 Burst Prefetch Mode [Enable]
L2 Up/Down Prefetcher [Enable]
Core Watchdog Timer Enable [Auto]
RedirectForReturnDis [Auto]
Power Supply Idle Control [Typical Current Idle]
SEV Control [Auto]
Opcache Control [Enabled]
Streaming Stores Control [Enabled]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
Platform First Error Handling [Auto]
MCA error thresh enable [Auto]
MCA FruText [True]
SMU and PSP Debug Mode [Auto]
PPIN Opt-in [Enabled]
REP-MOV/STOS Streaming [Enabled]
Enhanced REP MOVSB/STOSB [Enabled]
Fast Short REP MOVSB (FSRM) [Enabled]
SNP Memory (RMP Table) Coverage [Enabled]
SMEE [Enable]
Action on BIST Failure [Auto]
Log Transparent Errors [Auto]
AVX512 [Enabled]
MONITOR and MWAIT disable [Auto]
Corrector Branch Predictor [Enabled]
PAUSE Delay [Auto]
CPU Speculative Store Modes [Balanced]
SVM Lock [Enabled]
SVM Enable [Enabled]
Memory interleaving [Enabled]
Memory interleaving size [Auto]
DRAM map inversion [Enabled]
Location of private memory regions [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
Disable DF to external downstream IP Sync Flood Propagation [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
DF Cstates [Enabled]
PSP error injection support [False]
Active Memory Timing Settings [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor CS drive strengths [Auto]
CA ODT GroupA [Auto]
CK ODT GroupA [Auto]
CS ODT GroupA [Auto]
CA ODT GroupB [Auto]
CK ODT GroupB [Auto]
CS ODT GroupB [Auto]
Processor ODT Impedance Pull Up P0 [Auto]
Processor ODT Impedance Pull Down P0 [Auto]
Processor DQ drive strengths Pull Up P0 [Auto]
Processor DQ drive strengths Pull Down P0 [Auto]
Dram ODT Impedance RTT_NOM_WR P0 [Auto]
Dram ODT impedance RTT_NOM_RD P0 [Auto]
Dram ODT impedance RTT_WR P0 [Auto]
Dram ODT impedance RTT_PARK P0 [Auto]
Dram ODT impedance DQS_RTT_PARK P0 [Auto]
Dram DQ drive strengths Pull Up P0 [Auto]
Dram DQ drive strengths Pull Down P0 [Auto]
Processor ODT Impedance Pull Up P1 [Auto]
Processor ODT Impedance Pull Down P1 [Auto]
Processor DQ drive strengths Pull Up P1 [Auto]
Processor DQ drive strengths Pull Down P1 [Auto]
Dram ODT Impedance RTT_NOM_WR P1 [Auto]
Dram ODT impedance RTT_NOM_RD P1 [Auto]
Dram ODT impedance RTT_WR P1 [Auto]
Dram ODT impedance RTT_PARK P1 [Auto]
Dram ODT impedance DQS_RTT_PARK P1 [Auto]
Dram DQ drive strengths Pull Up P1 [Auto]
Dram DQ drive strengths Pull Down P1 [Auto]
Processor ODT Impedance Pull Up P2 [Auto]
Processor ODT Impedance Pull Down P2 [Auto]
Processor DQ drive strengths Pull Up P2 [Auto]
Processor DQ drive strengths Pull Down P2 [Auto]
Dram ODT Impedance RTT_NOM_WR P2 [Auto]
Dram ODT impedance RTT_NOM_RD P2 [Auto]
Dram ODT impedance RTT_WR P2 [Auto]
Dram ODT impedance RTT_PARK P2 [Auto]
Dram ODT impedance DQS_RTT_PARK P2 [Auto]
Dram DQ drive strengths Pull Up P2 [Auto]
Dram DQ drive strengths Pull Down P2 [Auto]
Processor ODT Impedance Pull Up P3 [Auto]
Processor ODT Impedance Pull Down P3 [Auto]
Processor DQ drive strengths Pull Up P3 [Auto]
Processor DQ drive strengths Pull Down P3 [Auto]
Dram ODT Impedance RTT_NOM_WR P3 [Auto]
Dram ODT impedance RTT_NOM_RD P3 [Auto]
Dram ODT impedance RTT_WR P3 [Auto]
Dram ODT impedance RTT_PARK P3 [Auto]
Dram ODT impedance DQS_RTT_PARK P3 [Auto]
Dram DQ drive strengths Pull Up P3 [Auto]
Dram DQ drive strengths Pull Down P3 [Auto]
Power Down Enable [Enabled]
Disable Memory Error Injection [Auto]
TSME [Enabled]
Data Scramble [Enabled]
Chipselect Interleaving [Auto]
Address Hash Bank [Enabled]
Address Hash CS [Enabled]
Address Hash Subchannel [Enabled]
BankSwapMode [Auto]
DFE Read Training [Enable]
DRAM PDA Enumerate ID Programming Mode [Sequential PDA enumeration mode]
TX DFE Taps [4 Taps]
PPT Control [Auto]
DDR Training Runtime Reduction [Auto]
Rx Burst Length [8x]
Tx Burst Length [8x]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [4 Taps]
MBIST Enable [Enabled]
MBIST Test Mode [Both]
MBIST Aggressors [Enabled]
MBIST Per Bit Slave Die Reporting [Enabled]
Pattern Select [Both]
Pattern Length Select [Auto]
Aggressor Channel [7 Aggressor Channels]
Memory Context Restore [Enabled]
Read Drift Adjustment [Auto]
Read Drift Adjustment P0 [Auto]
Read Drift Adjustment P1 [Auto]
Read Drift Adjustment P2 [Auto]
Read Drift Adjustment P3 [Auto]
Write Drift Adjustment [Auto]
Write Drift Adjustment P0 [Auto]
Write Drift Adjustment P1 [Auto]
Write Drift Adjustment P2 [Auto]
Write Drift Adjustment P3 [Auto]
Pre-boot DMA Protection [Auto]
Kernel DMA Protection Indicator [Auto]
PCIe ARI Support [Auto]
PCIe All Port ECRC [Auto]
Advanced Error Reporting (AER) [Auto]
PCIe ARI Enumeration [Auto]
UMA Version [Non-Legacy]
GPU Host Translation Cache [Auto]
NB Azalia [Enabled]
Audio IOs [Auto]
PCIe loopback Mode [Auto]
Persistence mode for legacy endpoints [Auto]
EQ Bypass To Highest Rate [Enable]
Retimer margining support [Auto]
TDP Control [Manual]
ECO Mode [Disable]
TDP [140000]
PPT Control [Manual]
PPT [142000]
Thermal Control [Manual]
TjMax [74]
TDC Control [Manual]
TDC_VDDCR_VDD [125000]
EDC Control [Manual]
EDC_VDDCR_VDD [170000]
Fan Control [Auto]
VDDP Voltage Control [Auto]
Infinity Fabric Frequency and Dividers [2167 MHz]
SyncFifo Mode Override [Disable]
Sustained PowerLimit [0]
Fast PPT Limit [0]
Slow PPT Limit [0]
Slow PPT Time Constant [0]
GFXOFF [Auto]

OS Type [Windows UEFI mode]
Secure Boot Mode [Custom]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Fast Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Bootup NumLock State [On]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Disabled]
AMI Native NVMe Driver Support [Enabled]
Setup Mode [Advanced Mode]
BIOS Image Rollback Support [Enabled]

DIMM Slot Number [DIMM_A2]

Special Display Features [Disabled]
D3Cold Support [Disabled]
Discrete GPU _DSM Function A [Disabled]
Discrete GPU _DSM Function B [Disabled]
NVIDIA DGPU Power Enable [Disabled]
Non-Eval Discrete GPU Support [Enabled]
Discrete GPU HPD Circuitry [OR Circuitry]
Discrete GPU's USB Port [Keep Default Setting]
Discrete GPU's SSID/SVID [Keep Default Setting]
Discrete GPU BOMACO Support [Disabled]
USB4 (ASM4242 Controller) Support [Disabled]
Thunderbolt/USB4 (Intel® JHL8540 controller) Support [Disabled]
AMD Variable Protection [Enabled]
Processor Aggregator Device [Disabled]
HDMI 3.0G Tx SLEW [Disabled]
CPU Frequency [0]
CPU Voltage [0]
SMT Control [Auto]
Prochot VRM Throttling [Auto]
Peak Current Control [Auto]
Active Memory Timing Settings [Auto]
Processor CS drive strengths [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor DQ drive strengths [Auto]
Processor ODT impedance [Auto]
Dram DQ drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Power Down Enable [Auto]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [4 Tap]
TX DFE Taps [4 Tap]
DDR5 Nitro Mode [Enable]
DDR5 Robust Training Mode [Enable]
Nitro RX Data [2]
Nitro TX Data [3]
Nitro Control Line [1]
Nitro Rx Burst Length [8X]
Nitro Tx Burst Length [8X]
Nitro DFE Vref Offset Limits [Auto]
Infinity Fabric Frequency and Dividers [Auto]
UCLK DIV1 MODE [UCLK=MEMCLK]
Precision Boost Overdrive [Auto]
VDDG Voltage Control [Auto]
VDDP Voltage Control [Auto]
SoC/Uncore OC Mode [Auto]
SoC Voltage [0]
LN2 Mode [Auto]
VDD Misc Control [Auto]
LCLK Frequency Control [Auto]
VDDIO Ctrl [Auto]
PMIC VDD Stepping Control [Auto]
PMIC VDDQ Stepping Control [Auto]
Enable Platform PMIC Control [Auto]
VPP Ctrl [Auto]
ECO Mode [Auto]

SAFEDISK
Level 11

maxresdefault (1).jpg

ROG CROSSHAIR/STRIX/TUF/PROART X670E Series Beta Bios 2401

1) Update AGESA to ComboAM5 1202
2) Improve system performance

dont use older cmo file

ROG CROSSHAIR X670E HERO BETA BIOS 2401
https://drive.google.com/file/d/1EwF4o1-84wplYFMpLRoQtzIACH4GiDg7/view?usp=sharing

ROG CROSSHAIR X670E GENE BETA BIOS 2401
https://drive.google.com/file/d/1c2wZSBM5B7uE_rJxCquRzelOE6i9Ho4S/view?usp=sharing

ROG CROSSHAIR X670E EXTREME BETA BIOS 2401
https://drive.google.com/file/d/1df-fvQArCP9uLUoQtRRDqyIwEX3grPKW/view?usp=sharing


ROG STRIX X670E-A GAMING WIFI BETA BIOS 2401
https://drive.google.com/file/d/1wnBB-N8KansiLNrtvSjk2vXzszmX4_in/view?usp=sharing

ROG STRIX X670E-E GAMING WIFI BETA BIOS 2401
https://drive.google.com/file/d/1Uh-IxYZ3dIniLR94eY9ePKB0Zo2mi-f7/view?usp=sharing

ROG STRIX X670E-F GAMING WIFI BETA BIOS 2401
https://drive.google.com/file/d/1MGn18ZnvpiPfhvLZNItrgQtzCrmydgam/view?usp=sharing

ROG STRIX X670E-I GAMING WIFI BETA BIOS 2401
https://drive.google.com/file/d/1UZt2mrWboq_UzgMW4rr1-VfrZ54o6loj/view?usp=sharing


TUF GAMING X670E PLUS BETA BIOS 3040
https://drive.google.com/file/d/1HxorH7mKyvFrcqAWGB_e9T26j7iErMlc/view?usp=sharing

TUF GAMING X670E PLUS WIFI BETA BIOS 3040
https://drive.google.com/file/d/1RR_0F80g9zyqgUmzff2_rFekduSJ2PTM/view?usp=sharing


PROART X670E CREATOR WIFI BETA BIOS 2401
https://drive.google.com/file/d/1CvLOKf0rrNzfkJHEFmB7bwkuY-btUHxR/view?usp=sharing

ROG STRIX X670E-E GAMING WIFI BETA BIOS 2401 stable - no problem including OC eCLK 107 MHz and Expo Tweaked 6000 @CL28 CPU 7800X3D THX

ROG STRIX X670E-F GAMING WIFI BETA BIOS 2401 is stable for me.  EXPO II setting on memory (straight settings from the EXPO profile).

Out of curiosity, what determines whether a Beta BIOS gets pushed to the support web-server for general consumption vs. here on the forums/"THE SPREADSHEET"?

Cheers.

7800X3D — Strix X670E-F — 2x16GB G.Skill 32GB kit (the black non-RGB EXPO stable Samsung ones) — 4080 FE — LG 34” 21:9 curved HDR600 — CPU + GPU blocks — Lian Li O11D Evo

SAFEDISK
Level 11

b650.jpg

ROG STRIX/TUF/PROART B650 Series Beta Bios 3040

1) Update AGESA to ComboAM5 1202
2) Improve system performance

dont use older cmo file

ROG STRIX B650-A GAMING WIFI Beta Bios 3040
https://drive.google.com/file/d/18DtosVYVte-gpwgccOzOq3HAYkJrH0jr/view?usp=sharing

ROG STRIX B650E-E GAMING WIFI Beta Bios 3040
https://drive.google.com/file/d/1iLxol0I4isTBUqFqfX4QF-zQCkElf2QB/view?usp=sharing

ROG STRIX B650E-F GAMING WIFI Beta Bios 3040
https://drive.google.com/file/d/1fuTjNi7aG21VaXrUHfh3EJTELXcbvxzH/view?usp=sharing

ROG STRIX B650E-I GAMING WIFI Beta Bios 3040
https://drive.google.com/file/d/1UY0IpUcLAq-5pvFBab6qEYjAzQ0FBZfy/view?usp=sharing


TUF GAMING B650-E WIFI Beta Bios 3040
https://drive.google.com/file/d/1fuTSvWktfLCfYiZDZpwBPagCZBEEErLo/view?usp=sharing

TUF GAMING B650-PLUS Beta Bios 3040
https://drive.google.com/file/d/1hwx5KIkOQhxbb0-N39hONmAlHajgZMT-/view?usp=sharing

TUF GAMING B650-PLUS WIFI Beta Bios 3040
https://drive.google.com/file/d/1aSiNywbWRgBAzhgfznOuSs7eiQs3Cpqv/view?usp=sharing

TUF GAMING B650M-E Beta Bios 3040
https://drive.google.com/file/d/1U0klxWpUTOS518sd75RXTRpcCyyRPooU/view?usp=sharing

TUF GAMING B650M-E WIFI Beta Bios 3040
https://drive.google.com/file/d/1S77Vz7B5T01bz2SfXgAq7aTc5QVXDJlw/view?usp=sharing

TUF GAMING B650M-PLUS Beta Bios 3040
https://drive.google.com/file/d/1qnHdU_EBk5xdWiOonS4QaNvWSfCe2glZ/view?usp=sharing

TUF GAMING B650M-PLUS WIFI Beta Bios 3040
https://drive.google.com/file/d/1eLnt52HHL-75JZ7rDegmli84ey92alX1/view?usp=sharing


PROART B650-CREATOR Beta Bios 2401
https://drive.google.com/file/d/19XIeZIFOHbt2xhQNbgsg2AXN3t68v6cx/view?usp=sharing

FAIL

cachemem00_FAILcachemem00_FAILcinebench R23 00 FAILcinebench R23 00 FAILcinebench R23 00bcinebench R23 00b

Spoiler
Ai Overclock Tuner [Auto]
Memory Frequency [DDR5-6200MHz]
FCLK Frequency [2167 MHz]
Core Performance Boost [Enabled]
CPU Core Ratio [CPU Core Ratio]
CPU Core Ratio [Auto]
Core VID [Auto]
CCX0 Ratio [52.00]
CCX0 Ratio [52.00]
Dynamic OC Switcher [Enabled]
Current Threshold to Switch to OC Mode [60]
Calibrated Temperature Threshold to switch back [85]
Hysteresis [0]
GPU Boost [Auto]
Tcl [30]
Trcd [36]
Trp [32]
Tras [36]
Trc [38]
Twr [48]
Refresh Interval [65528]
Trfc1 [384]
Trfc2 [384]
Trfcsb [384]
Trtp [12]
TrrdL [8]
TrrdS [4]
Tfaw [32]
TwtrL [12]
TwtrS [6]
TrdrdScl [5]
TrdrdSc [1]
TrdrdSd [6]
Trdrddd [6]
TwrwrScl [6]
TwrwrSc [1]
TwrwrSd [8]
TwrwrDd [1]
Twrrd [7]
Trdwr [18]
IBUF_LPWR_MODE [Enabled]
ADDR_CMD_MODE [UnBuf]
M_ORDERING [STRICT]
S_COL_WIDTH [Auto]
MC_SVA_TRIM0 [Auto]
MC_SVA_TRIM1 [Auto]
MC_SVA_TRIM2 [Auto]
MMCM_MULT_F [Enabled]
CA ODT GroupA [Auto]
CK ODT GroupA [Auto]
CS ODT GroupA [Auto]
CA ODT GroupB [Auto]
CK ODT GroupB [Auto]
CS ODT GroupB [Auto]
Processor ODT P state mode [Sync all P-states]
Processor ODT Impedance Pull Up P0 [Auto]
Processor ODT Impedance Pull Down P0 [Auto]
Processor DQ drive strengths Pull Up P0 [Auto]
Processor DQ drive strengths Pull Down P0 [Auto]
Dram ODT Impedance RTT_NOM_WR P0 [Auto]
Dram ODT impedance RTT_NOM_RD P0 [Auto]
Dram ODT impedance RTT_WR P0 [Auto]
Dram ODT impedance RTT_PARK P0 [Auto]
Dram ODT impedance DQS_RTT_PARK P0 [Auto]
Dram DQ drive strengths Pull Up P0 [Auto]
Dram DQ drive strengths Pull Down P0 [Auto]
Proc CS Drive Strength [30 ohm]
Proc CK Drive Strength [30 ohm]
Proc CA Drive Strength [30 ohm]
Proc Data Drive Strength [48 ohm]
CPU On-Die Termination [32 ohm]
DRAM Data Drive Strength [40 ohm]
Rtt Nom Wr [RZQ/6 (40)]
Rtt Nom Rd [RZQ/6 (40)]
Rtt Wr [RZQ/6 (40)]
Rtt Park [RZQ/5 (48)]
Rtt Park Dqs [RZQ/6 (40)]
Power Down Enable [Enabled]
Memory Context Restore [Enabled]
UCLK DIV1 MODE [UCLK=MEMCLK]
CA Tx Phase Shift Clk [Auto]
CS Tx Phase Shift Clk [Auto]
CK Tx Phase Shift Clk [Auto]
CA Rx Phase Shift Clk [Auto]
CS Rx Phase Shift Clk [Auto]
CK Rx Phase Shift Clk [Auto]
FIFO Wr En Fine Delay [Auto]
POC Sample PD [Disabled]
Bank Swap Mode [Auto]
Mem Over Clock Fail Count [Auto]
Prochot VRM Throttling [Enable]
Peak Current Control [Enable]
Medium Load Boostit [Enabled]
Precision Boost Overdrive [Manual]
PPT Limit [142]
TDC Limit [125]
EDC Limit [170]
Precision Boost Overdrive Scalar [Manual]
Customized Precision Boost Overdrive Scalar [8x]
CPU Boost Clock Override [Enabled (Negative)]
Max CPU Boost Clock Override(-) [100]
Per-Core Boost Clock Limit [Enabled]
Core 0 [Auto]
(...)
Core 15 [Auto]
Platform Thermal Throttle Limit [Manual]
Platform Thermal Throttle Limit [89]
Curve Optimizer [Per Core]
Core 0 Curve Optimizer Sign [Negative]
Core 0 Curve Optimizer Magnitude [25]
Core 1 Curve Optimizer Sign [Negative]
Core 1 Curve Optimizer Magnitude [25]
Core 2 Curve Optimizer Sign [Negative]
Core 2 Curve Optimizer Magnitude [25]
Core 3 Curve Optimizer Sign [Negative]
Core 3 Curve Optimizer Magnitude [25]
Core 4 Curve Optimizer Sign [Negative]
Core 4 Curve Optimizer Magnitude [25]
Core 5 Curve Optimizer Sign [Negative]
Core 5 Curve Optimizer Magnitude [25]
Core 6 Curve Optimizer Sign [Negative]
Core 6 Curve Optimizer Magnitude [25]
Core 7 Curve Optimizer Sign [Negative]
Core 7 Curve Optimizer Magnitude [25]
Core 8 Curve Optimizer Sign [Negative]
Core 8 Curve Optimizer Magnitude [25]
Core 9 Curve Optimizer Sign [Negative]
Core 9 Curve Optimizer Magnitude [25]
Core 10 Curve Optimizer Sign [Negative]
Core 10 Curve Optimizer Magnitude [25]
Core 11 Curve Optimizer Sign [Negative]
Core 11 Curve Optimizer Magnitude [25]
Core 12 Curve Optimizer Sign [Negative]
Core 12 Curve Optimizer Magnitude [25]
Core 13 Curve Optimizer Sign [Negative]
Core 13 Curve Optimizer Magnitude [25]
Core 14 Curve Optimizer Sign [Negative]
Core 14 Curve Optimizer Magnitude [25]
Core 15 Curve Optimizer Sign [Negative]
Core 15 Curve Optimizer Magnitude [25]
GFX Curve Optimizer [GFX Curve Optimizer]
GFX Curve Optimizer Sign [Negative]
GFX Curve Optimizer Magnitude [0]
Min Frequency - Low Temperature [Auto]
Min Frequency - Med Temperature [Auto]
Min Frequency - High Temperature [Auto]
Low Frequency - Low Temperature [Auto]
Low Frequency - Med Temperature [Auto]
Low Frequency - High Temperature [Auto]
Med Frequency - Low Temperature [Auto]
Med Frequency - Med Temperature [Auto]
Med Frequency - High Temperature [Auto]
High Frequency - Low Temperature [Auto]
High Frequency - Med Temperature [Auto]
High Frequency - High Temperature [Auto]
Max Frequency - Low Temperature [Auto]
Max Frequency - Med Temperature [Auto]
Max Frequency - High Temperature [Auto]
VRM Initialization Check [Enabled]
Voltage training [Enabled]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU Power Duty Control [Extreme]
CPU Power Phase Control [Manual]
Power Phase Response [Ultra Fast]
VDDSOC Current Capability [Auto]
VDDSOC Power Duty Control [Extreme]
VDDSOC Power Phase Control [Manual]
Power Phase Response [Ultra Fast]
Performance Bias [None]
Clock Spread Spectrum [Disabled]
Stretch mode for L3 DFLL [Enabled]
1.8V PLL Voltage [Auto]
1.8V Standby Voltage [Auto]
Misc_ALW [Auto]
Chipset 1.05V [Auto]
Algorithm 1 [Disabled]
Algorithm 2 [Disabled]
Algorithm 3 [Disabled]
CCD Priority Memory Activity Threshold [1070]
CCD Priority Hysteresis [Auto]
Cooler Efficiency Customize [Keep Training]
Cooler Re-evaluation Algorithm [Very inclined to update]
Optimism Scale [100]
CPU Core Voltage [Auto]
CPU SOC Voltage [Auto]
CPU VDDIO / MC Voltage [1.40000]
Misc Voltage [Offset Mode]
- Offset Mode Sign [+]
- Misc Voltage Offset [0.04550]
VDDP Voltage [1.066]
High DRAM Voltage Mode [Disabled]
DRAM VDD Voltage [1.40000]
DRAM VDDQ Voltage [1.40000]
VDDG CCD Voltage [Auto]
VDDG IOD Voltage [Auto]
PMIC Force Continuous Current Mode [Enabled]
PMIC Voltages [By per PMIC]
PMIC1 SPD HUB VLDO (1.8V) [Auto]
PMIC1 SPD HUB VDDIO (1.0V) [Auto]
PMIC1 Memory VDD Voltage [1.40000]
PMIC1 Memory VDDQ Voltage [1.40000]
PMIC1 Memory VPP Voltage [Auto]
PMIC1 Memory Voltage Switching Frequency [Auto]
PMIC1 Memory Current Capability [Auto]
PMIC3 SPD HUB VLDO (1.8V) [Auto]
PMIC3 SPD HUB VDDIO (1.0V) [Auto]
PMIC3 Memory VDD Voltage [1.40000]
PMIC3 Memory VDDQ Voltage [1.40000]
PMIC3 Memory VPP Voltage [Auto]
PMIC3 Memory Voltage Switching Frequency [Auto]
PMIC3 Memory Current Capability [Auto]
Security Device Support [Enabled]
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
Firmware TPM switch [Enable Firmware TPM]
Erase fTPM NV for factory reset [Enabled]
Password protection of Runtime Variables [Enable]
PSS Support [Enabled]
NX Mode [Enabled]
SVM Mode [Enabled]
Above 4G Decoding [Enabled]
Resize BAR Support [Enabled]
SR-IOV Support [Enabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
U32G2_C2 [Enabled]
(...)
USB17 [Enabled]
Network Stack [Enabled]
IPv4 PXE Support [Enabled]
IPv6 PXE Support [Enabled]
Device [Hitachi HUA723020ALA641]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Restore AC Power Loss [Power Off]
ErP Ready [Disabled]
Max Power Saving [Disabled]
Power On By PCI-E [Disabled]
Power On By RTC [Disabled]
Native ASPM [Enabled]
CPU PCIE ASPM Mode Control [L0s And L1 Entry]
PCIEX16_1 Bandwidth Bifurcation Configuration [PCIE X16 Mode]
USB Audio Controller [Enabled]
Wi-Fi Controller [Enabled]
Bluetooth Controller [Enabled]

When system is in sleep, hibernate or soft off states [All On]
Intel LAN Controller [Enabled]
USB power delivery in Soft Off state (S5) [Enabled]
ASMedia Storage Controller [Enabled]
Windows Hot-plug Notification [Enabled]
ASPM Support [Enabled]
PCIEX16_1 Link Mode [GEN 5]
PCIEX16_2 Link Mode [GEN 5]
M.2_3 Link Mode [GEN 5]
M.2_2 Link Mode [GEN 5]
Chipset Link Mode [GEN 4]
M.2_1 Link Mode [GEN 5]
PCIEX16_3 Link Mode [GEN 4]
M.2_4 Link Mode [GEN 4]
Primary Video Device [IGFX Video]
UMA Frame Buffer Size [1G]
Global C-state Control [Enabled]
IOMMU [Enabled]
ECC [Auto]
SMT Control [Auto]
Core Performance Boost [Auto]
L1 Stream HW Prefetcher [Enable]
L2 Stream HW Prefetcher [Enable]
L1 Stride Prefetcher [Enable]
L1 Region Prefetcher [Enable]
L1 Burst Prefetch Mode [Enable]
L2 Up/Down Prefetcher [Enable]
Core Watchdog Timer Enable [Auto]
RedirectForReturnDis [Auto]
Power Supply Idle Control [Typical Current Idle]
SEV Control [Auto]
Opcache Control [Enabled]
Streaming Stores Control [Enabled]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
Platform First Error Handling [Auto]
MCA error thresh enable [Auto]
MCA FruText [True]
SMU and PSP Debug Mode [Auto]
PPIN Opt-in [Enabled]
REP-MOV/STOS Streaming [Enabled]
Enhanced REP MOVSB/STOSB [Enabled]
Fast Short REP MOVSB (FSRM) [Enabled]
SNP Memory (RMP Table) Coverage [Enabled]
SMEE [Enable]
Action on BIST Failure [Auto]
Log Transparent Errors [Auto]
AVX512 [Enabled]
MONITOR and MWAIT disable [Auto]
Corrector Branch Predictor [Enabled]
PAUSE Delay [Auto]
CPU Speculative Store Modes [Balanced]
SVM Lock [Enabled]
SVM Enable [Enabled]
Memory interleaving [Auto]
Memory interleaving size [Auto]
DRAM map inversion [Auto]
Location of private memory regions [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
Disable DF to external downstream IP Sync Flood Propagation [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
DF Cstates [Enabled]
PSP error injection support [False]
Active Memory Timing Settings [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor CS drive strengths [Auto]
CA ODT GroupA [Auto]
CK ODT GroupA [Auto]
CS ODT GroupA [Auto]
CA ODT GroupB [Auto]
CK ODT GroupB [Auto]
CS ODT GroupB [Auto]
Processor ODT Impedance Pull Up P0 [Auto]
Processor ODT Impedance Pull Down P0 [Auto]
Processor DQ drive strengths Pull Up P0 [Auto]
Processor DQ drive strengths Pull Down P0 [Auto]
Dram ODT Impedance RTT_NOM_WR P0 [Auto]
Dram ODT impedance RTT_NOM_RD P0 [Auto]
Dram ODT impedance RTT_WR P0 [Auto]
Dram ODT impedance RTT_PARK P0 [Auto]
Dram ODT impedance DQS_RTT_PARK P0 [Auto]
Dram DQ drive strengths Pull Up P0 [Auto]
Dram DQ drive strengths Pull Down P0 [Auto]
Processor ODT Impedance Pull Up P1 [Auto]
Processor ODT Impedance Pull Down P1 [Auto]
Processor DQ drive strengths Pull Up P1 [Auto]
Processor DQ drive strengths Pull Down P1 [Auto]
Dram ODT Impedance RTT_NOM_WR P1 [Auto]
Dram ODT impedance RTT_NOM_RD P1 [Auto]
Dram ODT impedance RTT_WR P1 [Auto]
Dram ODT impedance RTT_PARK P1 [Auto]
Dram ODT impedance DQS_RTT_PARK P1 [Auto]
Dram DQ drive strengths Pull Up P1 [Auto]
Dram DQ drive strengths Pull Down P1 [Auto]
Processor ODT Impedance Pull Up P2 [Auto]
Processor ODT Impedance Pull Down P2 [Auto]
Processor DQ drive strengths Pull Up P2 [Auto]
Processor DQ drive strengths Pull Down P2 [Auto]
Dram ODT Impedance RTT_NOM_WR P2 [Auto]
Dram ODT impedance RTT_NOM_RD P2 [Auto]
Dram ODT impedance RTT_WR P2 [Auto]
Dram ODT impedance RTT_PARK P2 [Auto]
Dram ODT impedance DQS_RTT_PARK P2 [Auto]
Dram DQ drive strengths Pull Up P2 [Auto]
Dram DQ drive strengths Pull Down P2 [Auto]
Processor ODT Impedance Pull Up P3 [Auto]
Processor ODT Impedance Pull Down P3 [Auto]
Processor DQ drive strengths Pull Up P3 [Auto]
Processor DQ drive strengths Pull Down P3 [Auto]
Dram ODT Impedance RTT_NOM_WR P3 [Auto]
Dram ODT impedance RTT_NOM_RD P3 [Auto]
Dram ODT impedance RTT_WR P3 [Auto]
Dram ODT impedance RTT_PARK P3 [Auto]
Dram ODT impedance DQS_RTT_PARK P3 [Auto]
Dram DQ drive strengths Pull Up P3 [Auto]
Dram DQ drive strengths Pull Down P3 [Auto]
Power Down Enable [Enabled]
Disable Memory Error Injection [Auto]
TSME [Enabled]
Data Scramble [Enabled]
Chipselect Interleaving [Auto]
Address Hash Bank [Enabled]
Address Hash CS [Enabled]
Address Hash Subchannel [Enabled]
BankSwapMode [Auto]
DFE Read Training [Enable]
DRAM PDA Enumerate ID Programming Mode [Sequential PDA enumeration mode]
TX DFE Taps [4 Taps]
PPT Control [Auto]
DDR Training Runtime Reduction [Auto]
Rx Burst Length [8x]
Tx Burst Length [8x]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [4 Taps]
MBIST Enable [Enabled]
MBIST Test Mode [Both]
MBIST Aggressors [Enabled]
MBIST Per Bit Slave Die Reporting [Enabled]
Pattern Select [Both]
Pattern Length Select [Auto]
Aggressor Channel [7 Aggressor Channels]
Memory Context Restore [Enabled]
Read Drift Adjustment [Auto]
Read Drift Adjustment P0 [Auto]
Read Drift Adjustment P1 [Auto]
Read Drift Adjustment P2 [Auto]
Read Drift Adjustment P3 [Auto]
Write Drift Adjustment [Auto]
Write Drift Adjustment P0 [Auto]
Write Drift Adjustment P1 [Auto]
Write Drift Adjustment P2 [Auto]
Write Drift Adjustment P3 [Auto]
Pre-boot DMA Protection [Auto]
Kernel DMA Protection Indicator [Auto]
PCIe ARI Support [Auto]
PCIe All Port ECRC [Auto]
Advanced Error Reporting (AER) [Auto]
PCIe ARI Enumeration [Auto]
UMA Version [Auto]
GPU Host Translation Cache [Auto]
NB Azalia [Enabled]
Audio IOs [Auto]
PCIe loopback Mode [Auto]
Persistence mode for legacy endpoints [Auto]
EQ Bypass To Highest Rate [Enable]
Retimer margining support [Auto]
TDP Control [Manual]
ECO Mode [Disable]
TDP [160000]
PPT Control [Manual]
PPT [142000]
Thermal Control [Manual]
TjMax [74]
TDC Control [Manual]
TDC_VDDCR_VDD [125000]
EDC Control [Manual]
EDC_VDDCR_VDD [170000]
Fan Control [Auto]
VDDP Voltage Control [Auto]
Infinity Fabric Frequency and Dividers [2167 MHz]
SyncFifo Mode Override [Disable]
Sustained PowerLimit [0]
Fast PPT Limit [0]
Slow PPT Limit [0]
Slow PPT Time Constant [0]
GFXOFF [Auto]
Special Display Features [Disabled]
D3Cold Support [Disabled]
Discrete GPU _DSM Function A [Disabled]
Discrete GPU _DSM Function B [Disabled]
NVIDIA DGPU Power Enable [Disabled]
Non-Eval Discrete GPU Support [Enabled]
Discrete GPU HPD Circuitry [OR Circuitry]
Discrete GPU's USB Port [Keep Default Setting]
Discrete GPU's SSID/SVID [Keep Default Setting]
Discrete GPU BOMACO Support [Disabled]
USB4 (ASM4242 Controller) Support [Disabled]
Thunderbolt/USB4 (Intel® JHL8540 controller) Support [Disabled]
AMD Variable Protection [Enabled]
Processor Aggregator Device [Disabled]
HDMI 3.0G Tx SLEW [Disabled]
CPU Frequency [0]
CPU Voltage [0]
SMT Control [Auto]
Prochot VRM Throttling [Auto]
Peak Current Control [Auto]
Active Memory Timing Settings [Auto]
Processor CS drive strengths [Auto]
Processor CK drive strengths [Auto]
Processor CA drive strengths [Auto]
Processor DQ drive strengths [Auto]
Processor ODT impedance [Auto]
Dram DQ drive strengths [Auto]
Dram ODT impedance RTT_NOM_WR [Auto]
Dram ODT impedance RTT_NOM_RD [Auto]
Dram ODT impedance RTT_WR [Auto]
Dram ODT impedance RTT_PARK [Auto]
Dram ODT impedance DQS_RTT_PARK [Auto]
Power Down Enable [Disabled]
RX2D_TrainOpt [Auto]
TX2D_TrainOpt [Auto]
RX DFE Taps [4 Tap]
TX DFE Taps [4 Tap]
DDR5 Nitro Mode [Enable]
DDR5 Robust Training Mode [Enable]
Nitro RX Data [2]
Nitro TX Data [3]
Nitro Control Line [1]
Nitro Rx Burst Length [8X]
Nitro Tx Burst Length [8X]
Nitro DFE Vref Offset Limits [Auto]
Infinity Fabric Frequency and Dividers [Auto]
UCLK DIV1 MODE [UCLK=MEMCLK]
Precision Boost Overdrive [Auto]
VDDG Voltage Control [Auto]
VDDP Voltage Control [Auto]
SoC/Uncore OC Mode [Enabled]
SoC Voltage [0]
LN2 Mode [Auto]
VDD Misc Control [Auto]
LCLK Frequency Control [Auto]
VDDIO Ctrl [Auto]
PMIC VDD Stepping Control [Auto]
PMIC VDDQ Stepping Control [Auto]
Enable Platform PMIC Control [Auto]
VPP Ctrl [Auto]
ECO Mode [Auto]

 

If you enabled MCR (Memory Context Restore), verify that the "Power Down" mode is also enabled in the AMD overclocking settings, because BIOS 2401 got the same bug as 230x and when you enable MCR in ASUS' DRAM settings, while it also pretends to enable PD there (and while the AMD OC page shows "Auto" for PD), the BIOS actually wrongly saves AMD's PD setting as "Disabled" (which overrides ASUS' setting), causing systematic crashes a short while after each reboot  (with Zen, MCR and PD must be enabled together).

ASUS, please, fix this new bug in your BIOS, and also please kick AMD's ass so that they fix the PD disabled/MCR enabled crashes !!!

I've previously directly discussed this issue with ASUS' engineering team. They told me they couldn't do anything unless AMD fixes it in AGESA.

Was there any indication that AMD is aware of the problem? I really don't want to have to remember another bios setting to tweak.