10-04-2022 06:30 AM - edited 06-28-2024 08:41 AM
ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options
to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake
ocpak/octools
FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter
Test BIOSes:
new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
DOCP/EXPO Tweaked: (for simple timings tightening)
strixe-e 1515
for crosshair and strix e-e:
explanation of segment2 Loadline:
customize a heterogenous loadline for a dual segment workload range.
example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.
Adds for x3d
dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok
Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4
Can combine multiple algos for ccd priority so combinations are wide
works on non x3d too but of course senseless on it. detailed explanation here.
Solved! Go to Solution.
09-15-2024 09:59 AM
Power Down Enable [Enabled], i always have to keep it activated or else I can't even load the system. But there really are still a lot of bugs, as in the case of curve shaper is very complex to use, it requires a very well controlled temperature, or else the system freezes, so, at a certain point, it is kind of useless.
09-14-2024 08:57 AM
passed a quick memory test, but when cold starting the machine, it presented a sequence of errors, then, it did not complete the loading.:
QCODE-LED COLOR
20-RED; 2E-RED; 2F-RED
09-20-2024 01:20 AM
hello i had the same issue same bios settings as before sometimes after reset or power down while power up q-code 2F what is that error related?
09-14-2024 09:03 AM
total fail
09-15-2024 04:20 PM
09-15-2024 04:24 PM
09-12-2024 10:50 PM - edited 09-12-2024 11:03 PM
Bios 2401 work for me without any problems.
At AIDA64 with Expo Tweaked now 64,7 Latency! Thank you.
09-12-2024 11:30 PM
I have the X670E-I motherboard with the "ROG Hive".
I've noticed that if I use both USB's on the Hive and I unplug one of the USB's (Doesn't matter if it's A or C-type) Windows "reloads" both USB's and Explorer shows up with the other USB that's still connected like it's newly connected.
Not dealbreaking, but kind of annoying behaviour.
09-14-2024 10:26 AM
Another update
-> ROG STRIX X670E-E GAMING WIFI BIOS 2401
Version 2401 Beta Version
13.25 MB 2024/09/13
- 1.Updated to AMD AGESA PI 1.2.0.2.
- 2.Phase in AMD cTDP to 105W option for particular processors.
09-15-2024 07:34 AM
I was hoping this would fix the drop in pcie transfer mode to 1x after reboot but it does not. Currently the only way for my Crucial t705 to run at full pcie 5x speed is to do restart or cold boot. disappointing...