cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

2,092 Views
2,401 REPLIES 2,401

@SAFEDISK  More fixes regarding nvme drives? Any other changes?

2007 - all good with nvme drives on my Hero.

2007 test:

Flash done and reBoot and after enter F1 to SETUP (default with French, aura desactivated, no armory crate and all fans silent) and boot stop with error EC. (afraid here).


Switch OFF manually and reboot untill 20 seconds with 64 and another third boot untill 20 seconds with 64 and finally boot to windows (with lots of monitor swith on anf off). Remember here: just use internal IGPU.

Allways big boot problems with Crosshair hero x670e with internal IGPU (no problem with 1904 and before).

Maybe the 64 during 20 seconds is because I have an external 14 TO Seagate using USB3.0 ???? 
 

AssassinIII cpu cooler

It has not yet been possible to test the stability of the memories, but I did some tests between this current version and the previous one to see the impact on memory performance.

AIDA64 RED WRITE MINUS 4 BIOSv2613AIDA64 RED WRITE MINUS 4 BIOSv2613AIDA64 RED WRITE PLUS 4 BIOSv2613AIDA64 RED WRITE PLUS 4 BIOSv2613DDR5 READ and WRITE DRIFT MINUS 4 BIOSv2613DDR5 READ and WRITE DRIFT MINUS 4 BIOSv2613DDR5 READ and WRITE DRIFT PLUS 4 BIOSv2611DDR5 READ and WRITE DRIFT PLUS 4 BIOSv2611DDR5 READ and WRITE DRIFT PLUS 4 BIOSv2613DDR5 READ and WRITE DRIFT PLUS 4 BIOSv2613

6400MHz unstable

6400MHz unstable DDR56400MHz unstable DDR5

What changes to Ryzen 7000 series. Or no changes?

iamgarffi
Level 11

Thank you @SAFEDISK

2007 is very stable (Gene) and for the first time EXPO set correct memory timings on my new Dominator Titanium 2x32G CMP64GX5M2B6000Z30 without manual tweaking.

berke5534
Level 7

Hi,

Is there for asus prime b650m-k?

ksenchy
Level 11

I have Asus TUF 7800XT and it should be aura sync compatible, however I turned Aura OFF in BIOS and the LEDs on the GPU are still going. Does it not work in that way?

smortBlob
Level 7

Hey there,

how reliable are the readings of the tools? I get sometimes impossible values for VSOC and VCore. Is it because I ran PF Monitor and Raw VRM together? If so could someone point me to a manual? Much appreciated
Btw I think the PC crashes after running the tool.exe a while which just happened.

I have experienced a lot of pretty weird behaviour and problems with this board that includes 4 sticks of ram stable at MT/s 5000 up to Bios 1709. With every following Bios (three so far) they weren't stable anymore, not even at default settings.
But my MB problems are a topic for another thread ^^'

MB: ROG CROSSHAIR X670E Extreme
Bios: 1905
CPU: Ryzen 9 7950x
Memory: DDR5 6000 32GB (2x16GB) Kingston KF560C40BBAK2 - 32

smortBlob_0-1713269540681.png

smortBlob_1-1713269550005.png

 

This is BIOS 1905 on Team Group 2x16GB 8000 tested 20,000% KARHU and TM5 USMUS 25 cycles stable.

VDD 1.61v, VDDQ 1.51v

VDDGs 1100mv/1000mv.

Untitled.jpg

 

fEaRz
Level 8

2005 2006 2007 all bios have some kind of VDDQ or Memory voltage bug.

Reverted to 1905 and it's stable again.