cancel
Showing results for 
Search instead for 
Did you mean: 

X670 resource

Shamino
Moderator

ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options

to disable cores ccd go here and choose ccd xx bit map down core.
each ones stand for an enabled core
best to disable from the back, ie:
110000
instead of 0011000
after selection press downcore apply changes or discard if made mistake

ocpak/octools

FAQ:
7950x not boosting pass 5.5G -> check that CStates is not disabled
Detailed Explanation on CState Boot Limiter


Test BIOSes:

new:
X3D OC Preset for those MB with asynch BCLK Support: (for simple slight perf boost for X3D)
97792

DOCP/EXPO Tweaked: (for simple timings tightening)
97793

strixe-e 1515 

strixe-f 1515 

strix e a 1515 

crosshair hero 1515 

crosshair gene 1515 

crosshair extreme 1515 

creator 670 1515

creator b650 1515

strix 650E I

strix 670 itx

 

 

for crosshair and strix e-e:

explanation of segment2 Loadline:

dualseg.jpg

customize a heterogenous loadline for a dual segment workload range.

example above shows loadline=L6 when current is in range of 0~40A, and Level4 when current is above 40A.

 

 

 


Adds for x3d

dynamic ccd priority switch with core flex, os / driver agnostic so win10 win11 ok

97403

97404

Algo as follows:
If condition reached and ccd0 specified, then check current mem/cache activity > threshold and hysteresis reached, if fulfilled then switch
If condition reached and ccd1 specified, then check current mem/cache activity <=threshold and hysteresis reached,, if fulfilled then switch
Default hysteresis =4

Can combine multiple algos for ccd priority so combinations are wide

works on non x3d too but of course senseless on it. detailed explanation here.

3,765 Views
2,384 REPLIES 2,384

ReachOutAnTouch
Level 7

hey @Shamino any chance you could post up the LLC resistances for the Strix x670e-e board?

also, is running LLC8 actually safe? like, does it still give *some* droop?

 

I just find that with my 7800x3d, when I use the bclk2 up to 106-107 mhz, I need to use LLC7 or I get pretty significant clock stretching. This is with a CO of +2 or so. 107 I still get a touch of stretching, and I do have to use the boost limiter at -150 or so, otherwise I crash as soon as a benchmark is started. wondering if LLC8 would give me better results?

also, what voltages would I look at to see the droop? or does this board not have the required die sense voltage to actually display the true core voltage vs the vrm output voltage? any way to "spoof" this, or even ballpark it? I guess if i had the LLC resistances, in theory I could use the VRM output voltage (VOUT), along with the core current and the llc resistance to tell me the voltage droop?

SAFEDISK
Level 10

20240314135434556_s.png20240314135434556_s.png

ROG CROSSHAIR/STRIX X670E Series Beta Bios 2003

1) Update AGESA to 1170

dont use old cmo file

ROG CROSSHAIR X670E HERO BETA BIOS 2003
https://drive.google.com/file/d/1D986eO4zXZO2VExoG-GeJgYosvwsxrSg/view?usp=sharing

ROG CROSSHAIR X670E GENE BETA BIOS 2003
https://drive.google.com/file/d/18ikaekLo8U7fsdNOjXOxbuCy4wZaQSBb/view?usp=sharing

ROG CROSSHAIR X670E EXTREME BETA BIOS 2003
https://drive.google.com/file/d/1JQ6Qjq5Fo1Nw4njkoLixb4pitiXJSV3t/view?usp=sharing


ROG STRIX X670E-A GAMING WIFI BETA BIOS 2003
https://drive.google.com/file/d/1cHL5losgqZqOJCFWO23YXcHoeuNLW8UD/view?usp=sharing

ROG STRIX X670E-E GAMING WIFI BETA BIOS 2003
https://drive.google.com/file/d/12YNGwOYuwy4_imt6Wg4tW7J7lGF-2IWi/view?usp=sharing

ROG STRIX X670E-F GAMING WIFI BETA BIOS 2003
https://drive.google.com/file/d/1gWMOw4WSRGFTJ_Twh51uONi8DFJj5x3f/view?usp=sharing

ROG STRIX X670E-I GAMING WIFI BETA BIOS 2603
https://drive.google.com/file/d/1_aYvJGiw5wjH1QOXmNQKhGVCOvhZHUit/view?usp=sharing

Something new for proart x670e?

Hello

"don't use old cmo file"

It's my first tower computer, less than one year now.

- A good idea will be to add an explanation link, with each of your BIOS link update post, for a proper BIOS update.

That will be good for user like me, not familiar with a good BIOS update method, to use.

for example: don't use old cmo file (what does than mean)-> surely edit bios and save by default and reboot before update the BIOS ?

CMO files are BIOS profiles which can be stored within the profile menu (see FAQ).

ASUS offers a reasonable level of cross-compatibility between BIOS versions for CMO files, however,  occasionally there might be changes within a UEFI update (either from the CPU manufacturer or ASUS) which require a new CMO file to be created.

 

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

AGESA 1.1.7.0 is now FireRangePi,.. AM5 SMU 98.58.0,.. Adding Granite Ridge support. AMD must be getting ready to drop Zen 5 CPUs. 

AM5 SMU.jpg

x670e gene에 새로운것이 있나요?받고싶어요

kamyk155
Level 10

And here we go again....

New bios - more problems. Just like always. All the settings the same like always. Changing VDDIO voltage - computer not booting and few different led infos..... Next - integrated GPU - disabled - instant windows loading loop and reset. Then windows try to recover but still reset loop. For now - can't touch any voltages and igpu - the only way to normal windows boot.

ksenchy
Level 11

X670-F same issue. Disabling iGPU will prevent me to boot into windows. Reverting back to 1905