cancel
Showing results for 
Search instead for 
Did you mean: 

X670-e extreme,livedash stuck on "memory check"

chicago_1979
Level 8

Hi all. Built a new PC

1.7950X3D

2.DDR5 G.Skill 96Gb 6400Mhz F5-6400J3239F48GX2-TZ5RK

3.4090 Asus TUF

and so on, the remaining components are not important in my problem. And the problem is of the following nature: on the Livedas screen the inscription “Memory Chesk” constantly lights up. The PC itself works fine and passes the tests. At the same time, you can see how the inscription is trying to change (blinking occurs), but... I had to turn off the screen in the BIOS... but it’s a shame, I would like to figure it out. I reset the BIOS, changed the memory... Any ideas?

241 Views
5 REPLIES 5

Silent_Scone
Super Moderator

Hi there,

Have you installed Armoury Crate and tried to customise LiveDash?

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

No, it seemed to me that the information on the LED screen should be displayed by default. I'll have to try installing Armoury Crate, thanks for the tip.

KedarWolf
Level 10

I've had to disable IOMMU in the BIOS to get mine to post. You're like the third or fourth person I've said this to in the last week.

Thank you very much, I'll try...

To get the system to POST, or for LiveDash to operate? The OP is able to POST from what I can tell.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090