Random Spikes

[ReapingGamer02]

Anyone noticed any glitches like these, only recently noticed it and it seems somewhat consistent, even tried wiping windows reinstalling drivers and at this point i'm unsure if it's the monitoring software as it consistently seems to report spikes even had CPU#0 report over 1.3 vsoc when i left settings at default, and consistently it's UCLK/FCLK, Vsoc and vdd_misc spiking

[ReapingGamer02]

Well it shut down during a stress test so now not sure what to do

[gupsterg]

I run HWINFO a lot not seen major glitches, may be one odd value. To be honest in my test runs usually no glitches I have noticed. Here's a recent 10hr one.

During

End

 Any spread spectrum settings I would disable in UEFI.

VRM Spread Spectrum [Disabled]

Clock Spread Spectrum [Disabled]

[ReapingGamer02]

Sorry to ask but when you say disable you mean don't leave it on auto right? haven't really messed with the VRM settings

[Silent_Scone]

Hi @ReapingGamer02 

What sensors are you referring to?

---

@ReapingGamer02 wrote:

even had CPU#0 report over 1.3 vsoc when i left settings at default, and consistently it's UCLK/FCLK, Vsoc and vdd_misc spiking

---

Use CPU VDDCR_SOC Voltage (SVI3) for the SOC voltage.

Make sure not to run multiple polling tools (can induce polling errors)

[ReapingGamer02]

If that's the one that jumped to 1.216 then yes that's the one i'm monitoring, the only two applications that would be polling asf as i'm aware is ICUE and Hwinfo, but even if it was a polling error would 5 metrics really be jumping i'd be more understanding if it were just the one, or are you referring to going into AMD Overclocking and setting the Vsoc in there

[ReapingGamer02]

Could it be the polling setting being too agressive it was either .75ms or .5ms

[Silent_Scone]

Just ensure nothing else is running that could interfere with HWINFO polling the system, there should be no need to adjust the rate. SVI3 is the CPUs internal telemetry so should be the most accurate sensor. 1.216v is well within reasonable bounds.

If you want to compare power readings between the motherboard SIO and SVI3 make sure to do so at stock, but there should be minor realtime voltage deviation due to die sense implementation

[ReapingGamer02]

Yh that jump was but that's also the sensor that spikes past 1.3v after resetting everything to defaults and realising game first also polls I think, the motherboard sensors for the most part are static besides a 0.1v deviation 

[ReapingGamer02]

Since I'm probably irritating you with questions may as well say it you'd just leave it down to sensor irregularities right, also the voltages and fclk/uclk jumps happen at the same time that's the main reason I was concerned