cancel
Showing results for 
Search instead for 
Did you mean: 

Q-Code 0d - when enabling DOCP II.

32dtmxxt
Level 9

This is the ram I'm using.

https://www.corsair.com/us/en/p/memory/cmk32gx5m2b6200c36/vengeancea-32gb-2x16gb-ddr5-dram-6200mhz-c...

I just want It to run at it's rated speed anyway to make it work?

355 Views
1 ACCEPTED SOLUTION

Accepted Solutions

32dtmxxt
Level 9

Replaced the Ram with KF560C36BWEAK2-32 Now it works properly with no bluescreens.

View solution in original post

5 REPLIES 5

Silent_Scone
Super Moderator

Hello,

Which board? What UEFI revision are you running?
DOCP I is the board-optimised profile, make sure to try this first.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

X670E-E 1709

I did try DOCP Tweaked on this revision and I experienced random bluescreens so I decided to use the default ram profile which is DOCP II and got code 0d. To be exact most bluscreens are triggered when initiating a system restart from windows and it can be easily replicated.

I also ran Memtest86 4 passes on each stick individually and It passed with 0 errors. So that rules out issues with the stick.

I did try DOCP I on previous bios versions and It wasn't stable. I will test again with 1709 and report back any issues.

I also ordered new kingston ram sticks that contain EXPO AMD profiles to rule out issues with the board.

DOCP I failed to boot got Code 0d after doing a system restart from window 11.

32dtmxxt
Level 9

Replaced the Ram with KF560C36BWEAK2-32 Now it works properly with no bluescreens.

DanBlack
Level 7

common problem.
I use crosshair viii fomula x570, and I get code 0D when converting D.O.C.P
I use a pair of trident z royal bus 3600 ram