PROART X670E-CREATOR WIFI - EXPO extreme lag after installing BIOS 1415

[Holiday999]

Installed the 1415 Bios last night on my PROART X670E-CREATOR WIFI, when EXPO1 or 2 is turned on the PC moves slower than a glacier and freezes for minutes at a time. Shutdown doesn't complete and will hang indefinitely, Completely unusable until I go into the BIOS and turn EXPO off

I have 2x 32gb Corsair Vengenace Pro DDR5 sticks in slots A2/B2

I would like to know if there is something I can adjust besides rolling back the bios, I did not have these issues on 1410

PC Specs:

AMD Ryzen 7950X3D
Asus Proart X670E-Creator Wifi
CORSAIR VENGEANCE RGB DDR5 RAM 64GB (2x32GB) 6000MHz CL40 AMD EXPO Timing 40-40-40-77
Gigabyte Geforce RTX 4090
WD_BLACK 2TB SN850 NVMe Gen4

[Silent_Scone]

Hello,

Can you post the part number for the memory kit?

[Holiday999]

CORSAIR VENGEANCE RGB DDR5 RAM 64GB (2x32GB) 6000MHz CL40 AMD EXPO iCUE Compatible Computer Memory - Gray (CMH64GX5M2B6000Z40)

[Silent_Scone]

2x32GB modules @ 6000MT is fairly tough from a stability stand point. What sort of voltage is the board applying for VSOC?

https://www.asus.com/uk/motherboards-components/motherboards/proart/proart-x670e-creator-wifi/helpde...

If you check the QVL, this kit is not present. You may wish to return the kit and opt for one in that density that is qualifed.

[Holiday999]

Currently ~ 1.219 V
It's strange because I was able to run  2x32(64GB) 1410 @ 6000 Expo 1
are there any new BIOS settings on 1415 that could affect this?

[Silent_Scone]

As you're using 2x32GB modules I would wager VSOC rules may be some indication. Again, however, that kit isn't present on the QVL currently.

If auto rules are applying 1.22v I would try increasing this incrementally by 20mV to see if this helps.

You can also try DOCP II if not having done so already.

[ChrisCryp]

I am having the same problem with CORSAIR DOMINATOR PLATINUM RGB DDR5 RAM 32GB (2x16GB) CMT32GX5M2B6000C30. . . and I pulled and purchased this SKU  specifically becasue it was on the supported list 

[Holiday999]

I tried the voltage adjustments and it didn't take, currently running the ram without expo and praying to the ASUS BIOS gods for better luck on the next update

[Silent_Scone]

How much did you try? Have you tried EXPO I and II with these adjustments?

[say123]

why not just roll back to non beta bios 1303?