Installed the 1415 Bios last night on my PROART X670E-CREATOR WIFI, when EXPO1 or 2 is turned on the PC moves slower than a glacier and freezes for minutes at a time. Shutdown doesn't complete and will hang indefinitely, Completely unusable until I go into the BIOS and turn EXPO off
I have 2x 32gb Corsair Vengenace Pro DDR5 sticks in slots A2/B2
I would like to know if there is something I can adjust besides rolling back the bios, I did not have these issues on 1410
AMD Ryzen 7950X3D
Asus Proart X670E-Creator Wifi
CORSAIR VENGEANCE RGB DDR5 RAM 64GB (2x32GB) 6000MHz CL40 AMD EXPO Timing 40-40-40-77
Gigabyte Geforce RTX 4090
WD_BLACK 2TB SN850 NVMe Gen4
2x32GB modules @ 6000MT is fairly tough from a stability stand point. What sort of voltage is the board applying for VSOC?
If you check the QVL, this kit is not present. You may wish to return the kit and opt for one in that density that is qualifed.
As you're using 2x32GB modules I would wager VSOC rules may be some indication. Again, however, that kit isn't present on the QVL currently.
If auto rules are applying 1.22v I would try increasing this incrementally by 20mV to see if this helps.
You can also try DOCP II if not having done so already.
I am having the same problem with CORSAIR DOMINATOR PLATINUM RGB DDR5 RAM 32GB (2x16GB) CMT32GX5M2B6000C30. . . and I pulled and purchased this SKU specifically becasue it was on the supported list