I just flashed my x670e hero to 2308 and now I'm stuck with a boot code 60

[pissant]

I just  flashed the new bios for my x670e crosshair hero and it looked like it worked, it flashed the new stuff (agsea, led, bios) let me in, and i set the bios then rebooted and went back in the bios and it started to freeze after a few seconds and now I can't do anything, my qcode led gets stuck at 60.

I tried clearning the cmos to no avail and then flashing  back to 2204 but it still does the same thing, trains the memory,  at 15 hits 31, then goes to 60.

what is qcode 60 and how do I fix this since all I did was flash the bios then poof.

[pissant]

stay away from bios 2308, another person on reddit reported it bricked their system with qcode 60

[deterok]

Asus x670e gene the same bios version -- d6 after rebooting. Where can I get help?

[pissant]

I had to rma my board, it wouldn't flash back even with the flashback button

[lordberti]

I have no Problems. Everything runs.

Debug Code:

b0 (is also called 60) = CPU or Memory abnormal

d6 = Memory or Graphic Card abnormal

You can what try. The CLEAR CMOS button has 2 functions (so far i know):

- Press once = delete the Bios setting

- Press one briefly and once long = delete the BIOS setting and setting to factory defaults according to the current status of the new Bios

[pissant]

I already tried all that and my cpu and memory are good. I sent the board back Saturday for a rma

[deterok]

Did the same checks. Get b0/d6. Some times Linux kernel doesn't start with weird exceptions of init. It looks like Asus brake my mobo. I am waiting for any solution to fix that.